Re: [PATCH v3 11/16] gpio: add support for the sl28cpld GPIO controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 2020-04-27 13:45, schrieb Thomas Gleixner:
Michael Walle <michael@xxxxxxxx> writes:
+struct sl28cpld_gpio {
+	struct regmap_irq_chip irq_chip;
+	struct regmap_irq_chip_data *irq_data;
+};
+
+static const struct regmap_irq sl28cpld_gpio_irqs[] = {
+	REGMAP_IRQ_REG_LINE(0, 8),
+	REGMAP_IRQ_REG_LINE(1, 8),
+	REGMAP_IRQ_REG_LINE(2, 8),
+	REGMAP_IRQ_REG_LINE(3, 8),
+	REGMAP_IRQ_REG_LINE(4, 8),
+	REGMAP_IRQ_REG_LINE(5, 8),
+	REGMAP_IRQ_REG_LINE(6, 8),
+	REGMAP_IRQ_REG_LINE(7, 8),
+};

This is exactly the same as the one in the irq chip patch.

To my knowledge this boilerplate is just to describe this
irqchip has 8 different IRQs.

+static int sl28cpld_gpio_irq_init(struct device *dev,
+				  struct sl28cpld_gpio *gpio,
+				  struct regmap *regmap, unsigned int base,
+				  int irq)
+{
+	struct regmap_irq_chip *irq_chip = &gpio->irq_chip;
+
+	irq_chip->name = "sl28cpld-gpio-irq",
+	irq_chip->irqs = sl28cpld_gpio_irqs;
+	irq_chip->num_irqs = ARRAY_SIZE(sl28cpld_gpio_irqs);
+	irq_chip->num_regs = 1;
+	irq_chip->status_base = base + GPIO_REG_IP;
+	irq_chip->mask_base = base + GPIO_REG_IE;
+	irq_chip->mask_invert = true,
+	irq_chip->ack_base = base + GPIO_REG_IP;
+
+	return devm_regmap_add_irq_chip_np(dev, dev_of_node(dev), regmap,
+					   irq, IRQF_SHARED | IRQF_ONESHOT, 0,
+					   irq_chip, &gpio->irq_data);
+}

And this looks pretty familiar as well. What's the point of duplicating
that code?

this is also just boilerplate to configure the irqchip. But there are two
distinct blocks inside the board management controller:
 - an interrupt controller (which has 8 interrupts)
 - and gpio controllers which also happen to have 8 interrupts and
   both have some shared semantics for now. But the GPIO building block
   might be extended to provide interrupt type settings, i.e. falling/
   rising/level triggered interrupts.

So yes both look similar, but they are two different blocks, they use
different registers and they might drift apart in the future.

-michael


Thanks,

        tglx



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux