On 2020-02-19 11:34, Alexandre Torgue wrote:
Fix Marc email address.
On 2/18/20 2:12 PM, Alexandre Torgue wrote:
This patch adds level interrupt support to gpio irq chip.
A commit message should not contain "this patch".
GPIO hardware block is directly linked to EXTI block but EXTI handles
external interrupts only on edge. To be able to handle GPIO interrupt
on
level a "hack" is done in gpio irq chip: parent interrupt (exti irq
chip)
is retriggered following interrupt type and gpio line value.
Signed-off-by: Alexandre Torgue <alexandre.torgue@xxxxxx>
Tested-by: Marek Vasut <marex@xxxxxxx>
diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c
b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 2d5e0435af0a..dae236562543 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -92,6 +92,7 @@ struct stm32_gpio_bank {
u32 bank_nr;
u32 bank_ioport_nr;
u32 pin_backup[STM32_GPIO_PINS_PER_BANK];
+ u32 irq_type[STM32_GPIO_PINS_PER_BANK];
Do you really need a u32 here? an array of u8 seems enough. After all,
you only need two bits of information per interrupts (level or not,
low or high).
};
struct stm32_pinctrl {
@@ -303,6 +304,46 @@ static const struct gpio_chip stm32_gpio_template
= {
.get_direction = stm32_gpio_get_direction,
};
+void stm32_gpio_irq_eoi(struct irq_data *d)
+{
+ struct stm32_gpio_bank *bank = d->domain->host_data;
+ int line;
+
+ irq_chip_eoi_parent(d);
+
+ /* If level interrupt type then retrig */
+ line = stm32_gpio_get(&bank->gpio_chip, d->hwirq);
+ if ((line == 0 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_LOW) ||
+ (line == 1 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_HIGH))
+ irq_chip_retrigger_hierarchy(d);
s/line/level/
+};
+
+static int stm32_gpio_set_type(struct irq_data *d, unsigned int type)
+{
+ struct stm32_gpio_bank *bank = d->domain->host_data;
+ u32 parent_type;
+
+ bank->irq_type[d->hwirq] = type;
It would make more sense if this this assignment was done *after*
sanitizing the type value.
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_EDGE_FALLING:
+ case IRQ_TYPE_EDGE_BOTH:
+ parent_type = type;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ parent_type = IRQ_TYPE_EDGE_RISING;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ parent_type = IRQ_TYPE_EDGE_FALLING;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return irq_chip_set_type_parent(d, parent_type);
+};
+
static int stm32_gpio_irq_request_resources(struct irq_data
*irq_data)
{
struct stm32_gpio_bank *bank = irq_data->domain->host_data;
@@ -332,11 +373,11 @@ static void
stm32_gpio_irq_release_resources(struct irq_data *irq_data)
static struct irq_chip stm32_gpio_irq_chip = {
.name = "stm32gpio",
- .irq_eoi = irq_chip_eoi_parent,
+ .irq_eoi = stm32_gpio_irq_eoi,
.irq_ack = irq_chip_ack_parent,
.irq_mask = irq_chip_mask_parent,
.irq_unmask = irq_chip_unmask_parent,
- .irq_set_type = irq_chip_set_type_parent,
+ .irq_set_type = stm32_gpio_set_type,
.irq_set_wake = irq_chip_set_wake_parent,
.irq_request_resources = stm32_gpio_irq_request_resources,
.irq_release_resources = stm32_gpio_irq_release_resources,
Thanks,
M.
--
Jazz is not dead. It just smells funny...
