Re: [PATCH 0/3] PCI: brcmstb: Add Broadcom STB support

[Jaedon Shin <jaedon.shin@xxxxxxxxx>]

> 2020. 2. 13. 오후 12:54, Florian Fainelli <f.fainelli@xxxxxxxxx> 작성:
> 
> +Jim,
> 
> On 2/12/2020 6:59 PM, Jaedon Shin wrote:
>> This series enables the ARM based Broadcom STB SoCs and supports GPIO
>> based regulators for its power supplies. and this has an improvement on
>> devm_ APIS.
> 
> Which ARM-based SoCs did you try this on? We still have an issue with
> the multiple dma-ranges that must be handled to support 7445 with memory
> in the extension regions as well as 7278 and 7216.


I'm using BCM72604 which has only one memc. and device is Qualcomm Atheros
QCA6174 Wi-Fi module.

> 
> See comments in specific patches.
> 
>> 
>> Jaedon Shin (3):
>>  PCI: brcmstb: Enable ARCH_BRCMSTB
>>  PCI: brcmstb: Add regulator support
>>  PCI: brcmstb: Drop clk_put when probe fails and remove
>> 
>> .../bindings/pci/brcm,stb-pcie.yaml           |  8 +-
>> drivers/gpio/gpio-brcmstb.c                   | 13 +++-
>> drivers/pci/controller/Kconfig                |  2 +-
>> drivers/pci/controller/pcie-brcmstb.c         | 78 ++++++++++++++++++-
>> 4 files changed, 97 insertions(+), 4 deletions(-)
>> 
> 
> -- 
> Florian