Re: [PATCH v12 00/10] Support ROHM BD71828 PMIC

["Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>]

On Mon, 2020-01-20 at 14:41 +0200, Matti Vaittinen wrote:
> Hello,
> 
> Do you know those days when nothing, _nothing_ just works out as
> intended? Today is one of those.
> 
> On Mon, 2020-01-20 at 11:12 +0200, Matti Vaittinen wrote:
> > Patch series introducing support for ROHM BD71828 PMIC
> > 
> > ROHM BD71828 is a power management IC containing 7 bucks and 7
> > LDOs.
> > All
> > regulators can be controlled individually via I2C. Bucks 1,2,6 and
> > 7 can also be assigned to a "regulator group" controlled by run-
> > levels.
> > Eg. Run level specific voltages and enable/disable statuses for
> > each
> > of
> > these bucks can be set via register interface. The buck run-level
> > group
> > assignment (selection if buck is to be controlled individually or
> > via
> > run-levels) can be changed at run-time via I2C.
> > 
> > This patch series brings only the basic support for controlling
> > regulators individually via I2C.
> 
> //snip
> 
> > Patch 11:
> >         Allow control of GP(I)O pins on BD71828 via GPIO subsystem
> > 
> 
> I accidentally rebased to wrong commit and cropped the GPIO patch out
> of the series. Lee - can you take the GPIO part from v11 (patch 11/13
> there). It should apply cleanly and I have no changes to it. Or
> should
> I just resend the whole series (again)?

Maybe it is clearest if I just do resend... v13 is on it's way but I
dropped most of the recipients. Please let me know if some of you want
to get it.

> 
> Br,
>     Matti Vaittinen