[PATCH v4 0/3] Add DA9062 GPIO support

[Marco Felsch <m.felsch@xxxxxxxxxxxxxx>]

Hi,

this v4 adds the missing PIN_CONFIG_BIAS_DISABLE support so
pull-ups/-downs can be disconnected. I also added all git-tag already
made on my v3 [1].

@Lee
checkpatch complains about the "Acked-for-MFD-by" tag. I kept it but is
this behaviour on purpose?

Regards,
  Marco

[1] https://lkml.org/lkml/2019/12/12/601

Marco Felsch (3):
  dt-bindings: mfd: da9062: add gpio bindings
  mfd: da9062: add support for the DA9062 GPIOs in the core
  pinctrl: da9062: add driver support

 .../devicetree/bindings/mfd/da9062.txt        |  10 +
 MAINTAINERS                                   |   1 +
 drivers/mfd/da9062-core.c                     |  16 +-
 drivers/pinctrl/Kconfig                       |  12 +
 drivers/pinctrl/Makefile                      |   1 +
 drivers/pinctrl/pinctrl-da9062.c              | 300 ++++++++++++++++++
 6 files changed, 339 insertions(+), 1 deletion(-)
 create mode 100644 drivers/pinctrl/pinctrl-da9062.c

-- 
2.20.1