[PATCH 4/5] pinctrl: ingenic: Factorize irq_set_type function

[Paul Cercueil <paul@xxxxxxxxxxxxxxx>]

Simplify the code of the driver's irq_set_type() function by doing some
factorization. The behaviour is unchanged.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
 drivers/pinctrl/pinctrl-ingenic.c | 64 ++++++++++++-------------------
 1 file changed, 24 insertions(+), 40 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 7f73f27cce91..419717fc7793 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -1676,58 +1676,42 @@ static void irq_set_type(struct ingenic_gpio_chip *jzgc,
 		u8 offset, unsigned int type)
 {
 	u8 reg1, reg2;
-
-	if (jzgc->jzpc->info->version >= ID_JZ4760) {
-		reg1 = JZ4760_GPIO_PAT1;
-		reg2 = JZ4760_GPIO_PAT0;
-	} else {
-		reg1 = JZ4740_GPIO_TRIG;
-		reg2 = JZ4740_GPIO_DIR;
-	}
+	bool val1, val2;
 
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
-		if (jzgc->jzpc->info->version >= ID_X1000) {
-			ingenic_gpio_shadow_set_bit(jzgc, reg2, offset, true);
-			ingenic_gpio_shadow_set_bit(jzgc, reg1, offset, true);
-			ingenic_gpio_shadow_set_bit_load(jzgc);
-		} else {
-			ingenic_gpio_set_bit(jzgc, reg2, offset, true);
-			ingenic_gpio_set_bit(jzgc, reg1, offset, true);
-		}
+		val1 = val2 = true;
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
-		if (jzgc->jzpc->info->version >= ID_X1000) {
-			ingenic_gpio_shadow_set_bit(jzgc, reg2, offset, false);
-			ingenic_gpio_shadow_set_bit(jzgc, reg1, offset, true);
-			ingenic_gpio_shadow_set_bit_load(jzgc);
-		} else {
-			ingenic_gpio_set_bit(jzgc, reg2, offset, false);
-			ingenic_gpio_set_bit(jzgc, reg1, offset, true);
-		}
+		val1 = false;
+		val2 = true;
 		break;
 	case IRQ_TYPE_LEVEL_HIGH:
-		if (jzgc->jzpc->info->version >= ID_X1000) {
-			ingenic_gpio_shadow_set_bit(jzgc, reg2, offset, true);
-			ingenic_gpio_shadow_set_bit(jzgc, reg1, offset, false);
-			ingenic_gpio_shadow_set_bit_load(jzgc);
-		} else {
-			ingenic_gpio_set_bit(jzgc, reg2, offset, true);
-			ingenic_gpio_set_bit(jzgc, reg1, offset, false);
-		}
+		val1 = true;
+		val2 = false;
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
 	default:
-		if (jzgc->jzpc->info->version >= ID_X1000) {
-			ingenic_gpio_shadow_set_bit(jzgc, reg2, offset, false);
-			ingenic_gpio_shadow_set_bit(jzgc, reg1, offset, false);
-			ingenic_gpio_shadow_set_bit_load(jzgc);
-		} else {
-			ingenic_gpio_set_bit(jzgc, reg2, offset, false);
-			ingenic_gpio_set_bit(jzgc, reg1, offset, false);
-		}
+		val1 = val2 = false;
 		break;
 	}
+
+	if (jzgc->jzpc->info->version >= ID_JZ4760) {
+		reg1 = JZ4760_GPIO_PAT1;
+		reg2 = JZ4760_GPIO_PAT0;
+	} else {
+		reg1 = JZ4740_GPIO_TRIG;
+		reg2 = JZ4740_GPIO_DIR;
+	}
+
+	if (jzgc->jzpc->info->version >= ID_X1000) {
+		ingenic_gpio_shadow_set_bit(jzgc, reg2, offset, val1);
+		ingenic_gpio_shadow_set_bit(jzgc, reg1, offset, val2);
+		ingenic_gpio_shadow_set_bit_load(jzgc);
+	} else {
+		ingenic_gpio_set_bit(jzgc, reg2, offset, val1);
+		ingenic_gpio_set_bit(jzgc, reg1, offset, val2);
+	}
 }
 
 static void ingenic_gpio_irq_mask(struct irq_data *irqd)
-- 
2.24.1