The IPQ6018 is Qualcomm\u2019s 802.11ax SoC for Routers, Gateways and Access Points. This series adds minimal board boot support for ipq6018-cp01 board. [V3] * Removed clock driver and bindings from this patch series, and added them as a different series. * Removed qpic_padN from pinctrl driver. * Addressed review comments in dts, and added the remaining fixed clocks their * Fixed review comments in pinctrl bindings * Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build dependency with, https://patchwork.ozlabs.org/patch/1217293/ [v2] * Splitted dt bindings and driver into different patches. Added missing bindings and some style changes. * Added ipq6018 schema * Addressed review comments for gcc clock bindings. * Removed all clk critical flags, removed 1/1 factor clocks, moved to new way of specifying clk parents, and addressed other review comments. * Sorted nodes based on address, name, label. Removed unused clock nodes, Addressed other review comments. Sricharan R (5): dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings pinctrl: qcom: Add ipq6018 pinctrl driver dt-bindings: qcom: Add ipq6018 bindings arm64: dts: Add ipq6018 SoC and CP01 board support arm64: defconfig: Enable qcom ipq6018 clock and pinctrl Documentation/devicetree/bindings/arm/qcom.yaml | 8 + .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 174 +++ arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 30 + arch/arm64/boot/dts/qcom/ipq6018.dtsi | 263 +++++ arch/arm64/configs/defconfig | 3 + drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq6018.c | 1107 ++++++++++++++++++++ 9 files changed, 1597 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c -- 1.9.1