Re: [PATCH V2 1/7] dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,

On 12/29/2019 9:11 AM, Bjorn Andersson wrote:
> On Thu 19 Dec 02:41 PST 2019, Sricharan R wrote:
> 
>> Add device tree binding Documentation details for ipq6018
>> pinctrl driver.
>>
>> Co-developed-by: Rajkumar Ayyasamy <arajkuma@xxxxxxxxxxxxxx>
>> Signed-off-by: Rajkumar Ayyasamy <arajkuma@xxxxxxxxxxxxxx>
>> Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@xxxxxxxxxxxxxx>
>> Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@xxxxxxxxxxxxxx>
>> Co-developed-by: Sivaprakash Murugesan <sivaprak@xxxxxxxxxxxxxx>
>> Signed-off-by: Sivaprakash Murugesan <sivaprak@xxxxxxxxxxxxxx>
>> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
>> ---
>>
>> [V2] Splitted dt bindings and driver into different patches. Added missing bindings,
>>      and some style changes.
>>
>>  .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml     | 172 +++++++++++++++++++++
>>  1 file changed, 172 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
>> new file mode 100644
>> index 0000000..745a11e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
>> @@ -0,0 +1,172 @@
>> +# SPDX-License-Identifier: GPL-2.0-or-later
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Technologies, Inc. IPQ6018 TLMM block
>> +
>> +maintainers:
>> +  - Sricharan R <sricharan@xxxxxxxxxxxxxx>
>> +
>> +description: |
>> +  This binding describes the Top Level Mode Multiplexer block found in the
>> +  IPQ6018 platform.
>> +
>> +properties:
>> +  compatible:
>> +    const: qcom,ipq6018-pinctrl
>> +  reg:
>> +    maxItems: 1
>> +  interrupts:
>> +    Description: Specifies the TLMM summary IRQ
>> +    maxItems: 1
>> +  interrupt-controller: true
>> +  '#interrupt-cells':
>> +    Description:
>> +      Specifies the PIN numbers and Flags, as defined in defined in
>> +      include/dt-bindings/interrupt-controller/irq.h
>> +    const: 2
>> +  gpio-controller: true
>> +  '#gpio-cells':
>> +    Description: Specifying the pin number and flags, as defined in
>> +      include/dt-bindings/gpio/gpio.h
>> +    const: 2
>> +  gpio-ranges:
>> +    Description: Documentation/devicetree/bindings/gpio/gpio.txt
>> +    maxItems: 1
>> +
>> +#PIN CONFIGURATION NODES
>> +patternProperties:
>> +  '-pins$':
>> +    type: object
>> +    Description:
>> +      Pinctrl node's client devices use subnodes for desired pin configuration.
>> +      Client device subnodes use below standard properties.
>> +
>> +    Properties:
>> +      pins:
>> +        allOf:
>> +          $ref: /schemas/types.yaml#/definitions/string
>> +          enum:
>> +            gpio0-gpio80
>> +            sdc1_clk
>> +            sdc1_cmd
>> +            sdc1_data
>> +            sdc2_clk
>> +            sdc2_cmd
>> +            sdc2_data
>> +            qdsd_cmd
>> +            qdsd_data0
>> +            qdsd_data1
>> +            qdsd_data2
>> +            qdsd_data3
>> +        Description:
>> +          List of gpio pins affected by the properties specified in this
>> +          subnode.
>> +
>> +      function:
>> +        allOf:
>> +          $ref: /schemas/types.yaml#/definitions/string
>> +          enum:
>> +            adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
>> +            atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
>> +            atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
>> +            atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp_i2c1,
>> +            blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6,  blsp_spi1,
>> +            blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2,
>> +            blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3,
>> +            blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, blsp_spi5,
>> +            blsp_spi6, blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, cam1_rst,
>> +            cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
>> +            cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
>> +            dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
>> +            flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
>> +            gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0,
>> +            gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2,
>> +            ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc,
>> +            nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s,
>> +            pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
>> +            pwr_modem_enabled_a,  pwr_modem_enabled_b, pwr_nav_enabled_a,
>> +            pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
>> +            qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
>> +            qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
>> +            qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
>> +            qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write,
>> +            sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3,
>> +            uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst
>> +        Description:
>> +          Specify the alternative function to be configured for the specified
>> +          pins.
>> +      bias-disable:
> 
> Is there any way to inherit these from some common definition?
> 

 ok, will check and if possible will inherit those.

>> +        type: boolean
>> +        Description:
>> +          The specified pins should be configured as no pull.
>> +      bias-pull-down:
>> +        type: boolean
>> +        Description:
>> +          The specified pins should be configured as pull down.
>> +      bias-pull-up:
>> +        type: boolean
>> +        Description:
>> +          The specified pins should be configured as pull up.
>> +      output-high:
>> +        type: boolean
>> +        Description:
>> +          The specified pins are configured in output mode, driven high.
>> +          This option is not available for sdc pins.
>> +      output-low:
>> +        type: boolean
>> +        Description:
>> +          The specified pins are configured in output mode, driven low.
>> +          This option is not available for sdc pins.
>> +      drive-strength:
>> +        allOf:
>> +          $ref: /schemas/types.yaml#/definitions/uint32
>> +          enum: [2, 4, 6, 8, 10, 12, 14, 16]
>> +        Description:
>> +          elects the drive strength for the specified pins, in mA.
> 
> Selects?
> 

 ok will fix.

>> +
>> +    required:
>> +      - pins
>> +      - function
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +  - interrupt-controller
>> +  - '#interrupt-cells'
>> +  - gpio-controller
>> +  - '#gpio-cells'
>> +  - gpio-ranges
>> +
>> +example:
>> +        tlmm: pinctrl@1000000 {
>> +                compatible = "qcom,ipq6018-pinctrl";
>> +                reg = <0x1000000 0x300000>;
>> +                interrupts = <0 208 0>;
> 
> <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>
> 

 ok.

>> +                gpio-controller;
>> +                #gpio-cells = <2>;
>> +                interrupt-controller;
>> +                #interrupt-cells = <2>;
>> +
>> +                uart_pins: uart_pins {
> 
> s/_/- in the node name.
> 

 ok.

>> +                        mux {
>> +                                pins = "gpio4", "gpio5";
>> +                                function = "blsp_uart2";
> 
> Duplicate the function definition in tx and rx and drop the "mux" node.
> 

 ok.

Regards,
 Sricharan

-- 
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux