[PATCH 0/1] pinctrl: iproc: Fix level interrupt handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



An issue is seen on the BCM56060 SoC using the pinctrl-iproc-gpio.c driver
for one of its GPIO blocks.
When a GPIO on this block is used as a level sensitive interrupt the
downstream handler is not invoked until the level returns to its previous
(non-interrupting) state. This makes the level sensitive interrupts
unusable. Edge sensitive interrupts are not affected.

The fix is to simply ensure that we use a more appropriate handler
(handle_level_irq) for the interrupt based on what trigger type has been
configured.
Similar setting of the handler is done in numerous other drivers.

Hamish Martin (1):
  pinctrl: iproc: Set irq handler based on trig type

 drivers/pinctrl/bcm/pinctrl-iproc-gpio.c | 5 +++++
 1 file changed, 5 insertions(+)

-- 
2.24.1




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux