On Mon, Dec 2, 2019 at 5:59 AM Andrew Jeffery <andrew@xxxxxxxx> wrote:
> Early revisions of the AST2600 datasheet are conflicted about the state
> of the LPC/eSPI strapping bit (SCU510[6]). Conversations with ASPEED
> determined that the reference pinmux configuration tables were in error
> and the SCU documentation contained the correct configuration. Update
> the driver to reflect the state described in the SCU documentation.
>
> Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
> Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx>
Patch applied for fixes.
Yours,
Linus Walleij
Re: [PATCH] pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH] pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Date: Thu, 12 Dec 2019 16:27:52 +0100
- In-reply-to: <20191202050110.15340-1-andrew@aj.id.au>
- References: <20191202050110.15340-1-andrew@aj.id.au>
- References:
- [PATCH] pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
- From: Andrew Jeffery
- [PATCH] pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
- Prev by Date: Re: [PATCH v4] gpio: pca953x: Add Maxim MAX7313 PWM support
- Next by Date: Re: [PATCH 1/2] gpio: mvebu: use platform_irq_count
- Previous by thread: [PATCH] pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
- Next by thread: [PATCH] gpiolib: hold gpio devices lock until ->descs array is initialised
- Index(es):
 |