Re: [PATCH 7/8] gpiolib: add new ioctl() for monitoring changes in line info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



czw., 28 lis 2019 o 16:02 Kent Gibson <warthog618@xxxxxxxxx> napisał(a):
>
> On Thu, Nov 28, 2019 at 03:36:19PM +0100, Bartosz Golaszewski wrote:
> > czw., 28 lis 2019 o 15:10 Kent Gibson <warthog618@xxxxxxxxx> napisał(a):
> > >
> > > On Thu, Nov 28, 2019 at 10:45:46AM +0100, Bartosz Golaszewski wrote:
> > > > czw., 28 lis 2019 o 00:23 Kent Gibson <warthog618@xxxxxxxxx> napisał(a):
> > > > >
> > > > > On Wed, Nov 27, 2019 at 04:50:43PM +0100, Bartosz Golaszewski wrote:
> > > > > > śr., 27 lis 2019 o 16:24 Kent Gibson <warthog618@xxxxxxxxx> napisał(a):
> > > > > > >
> > > > > > > On Wed, Nov 27, 2019 at 02:35:09PM +0100, Bartosz Golaszewski wrote:
> > > > > > > > From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> > > > > > > >
> > > > > > > > Currently there is no way for user-space to be informed about changes
> > > > > > > > in status of GPIO lines e.g. when someone else requests the line or its
> > > > > > > > config changes. We can only periodically re-read the line-info. This
> > > > > > > > is fine for simple one-off user-space tools, but any daemon that provides
> > > > > > > > a centralized access to GPIO chips would benefit hugely from an event
> > > > > > > > driven line info synchronization.
> > > > > > > >
> > > > > > > > This patch adds a new ioctl() that allows user-space processes to retrieve
> > > > > > > > a file-descriptor for given GPIO lines which can be polled for line status
> > > > > > > > change events.
> > > > > > > >
> > > > > > > > Currently the events are generated on three types of status changes: when
> > > > > > > > a line is requested, when it's released and when its config is changed.
> > > > > > > > The first two are self-explanatory. For the third one: this will only
> > > > > > > > happen when another user-space process calls the new SET_CONFIG ioctl()
> > > > > > > > as any changes that can happen from within the kernel (i.e.
> > > > > > > > set_transitory() or set_debounce()) are of no interest to user-space.
> > > > > > > >
> > > > > > > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> > > > > > > > ---
> > > > > > > >  drivers/gpio/gpiolib.c    | 218 ++++++++++++++++++++++++++++++++++++++
> > > > > > > >  drivers/gpio/gpiolib.h    |   1 +
> > > > > > > >  include/uapi/linux/gpio.h |  36 +++++++
> > > > > > > >  3 files changed, 255 insertions(+)
> > > > > > > >
> > > > > > > > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> > > > > > > > index d094b1be334d..be5df4bdf44b 100644
> > > > > > > > --- a/drivers/gpio/gpiolib.c
> > > > > > > > +++ b/drivers/gpio/gpiolib.c
> > > > > > > > @@ -547,6 +547,9 @@ static long linehandle_set_config(struct linehandle_state *lh,
> > > > > > > >                       if (ret)
> > > > > > > >                               return ret;
> > > > > > > >               }
> > > > > > > > +
> > > > > > > > +             atomic_notifier_call_chain(&desc->gdev->notifier,
> > > > > > > > +                                        GPIOLINE_CHANGED_CONFIG, desc);
> > > > > > > >       }
> > > > > > > >       return 0;
> > > > > > > >  }
> > > > > > > > @@ -1148,6 +1151,212 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
> > > > > > > >       return ret;
> > > > > > > >  }
> > > > > > > >
> > > > > > > > +struct linechanged_fd_state {
> > > > > > > > +     struct gpio_device *gdev;
> > > > > > > > +     struct gpio_desc *descs[GPIOHANDLES_MAX];
> > > > > > > > +     size_t numdescs;
> > > > > > > > +     wait_queue_head_t waitqueue;
> > > > > > > > +     DECLARE_KFIFO(events, struct gpioline_changed, 16);
> > > > > > > > +     struct mutex lock;
> > > > > > > > +     struct notifier_block changed_nb;
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +static int linechanged_fd_release(struct inode *inode, struct file *filep)
> > > > > > > > +{
> > > > > > > > +     struct linechanged_fd_state *lc_state = filep->private_data;
> > > > > > > > +
> > > > > > > > +     atomic_notifier_chain_unregister(&lc_state->gdev->notifier,
> > > > > > > > +                                      &lc_state->changed_nb);
> > > > > > > > +     put_device(&lc_state->gdev->dev);
> > > > > > > > +     kfree(lc_state);
> > > > > > > > +
> > > > > > > > +     return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static __poll_t linechanged_fd_poll(struct file *filep,
> > > > > > > > +                                 struct poll_table_struct *pollt)
> > > > > > > > +{
> > > > > > > > +     struct linechanged_fd_state *lc_state = filep->private_data;
> > > > > > > > +     __poll_t events = 0;
> > > > > > > > +
> > > > > > > > +     poll_wait(filep, &lc_state->waitqueue, pollt);
> > > > > > > > +
> > > > > > > > +     mutex_lock(&lc_state->lock);
> > > > > > > > +     if (!kfifo_is_empty(&lc_state->events))
> > > > > > > > +             events = EPOLLIN | EPOLLRDNORM;
> > > > > > > > +     mutex_unlock(&lc_state->lock);
> > > > > > > > +
> > > > > > > > +     return events;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static ssize_t linechanged_fd_read(struct file *filep, char __user *buf,
> > > > > > > > +                                size_t count, loff_t *off)
> > > > > > > > +{
> > > > > > > > +     struct linechanged_fd_state *lc_state = filep->private_data;
> > > > > > > > +     unsigned int copied;
> > > > > > > > +     int ret;
> > > > > > > > +
> > > > > > > > +     if (count < sizeof(struct gpioline_changed))
> > > > > > > > +             return -EINVAL;
> > > > > > > > +
> > > > > > > > +     do {
> > > > > > > > +             mutex_lock(&lc_state->lock);
> > > > > > > > +             if (kfifo_is_empty(&lc_state->events)) {
> > > > > > > > +                     mutex_unlock(&lc_state->lock);
> > > > > > > > +                     if (filep->f_flags & O_NONBLOCK)
> > > > > > > > +                             return -EAGAIN;
> > > > > > > > +
> > > > > > > > +                     ret = wait_event_interruptible(lc_state->waitqueue,
> > > > > > > > +                                     !kfifo_is_empty(&lc_state->events));
> > > > > > > > +                     if (ret)
> > > > > > > > +                             return ret;
> > > > > > > > +             } else {
> > > > > > > > +                     mutex_unlock(&lc_state->lock);
> > > > > > > > +             }
> > > > > > > > +
> > > > > > > > +             if (mutex_lock_interruptible(&lc_state->lock))
> > > > > > > > +                     return -ERESTARTSYS;
> > > > > > > > +
> > > > > > > > +             ret = kfifo_to_user(&lc_state->events, buf, count, &copied);
> > > > > > > > +             mutex_unlock(&lc_state->lock);
> > > > > > > > +             if (ret)
> > > > > > > > +                     return ret;
> > > > > > > > +
> > > > > > > > +             if (copied == 0 && (filep->f_flags & O_NONBLOCK))
> > > > > > > > +                     return -EAGAIN;
> > > > > > > > +     } while (copied == 0);
> > > > > > > > +
> > > > > > > > +     return copied;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static const struct file_operations linechanged_fd_fileops = {
> > > > > > > > +     .release = linechanged_fd_release,
> > > > > > > > +     .owner = THIS_MODULE,
> > > > > > > > +     .llseek = noop_llseek,
> > > > > > > > +     .poll = linechanged_fd_poll,
> > > > > > > > +     .read = linechanged_fd_read,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +static struct linechanged_fd_state *
> > > > > > > > +to_linechanged_fd_state(struct notifier_block *nb)
> > > > > > > > +{
> > > > > > > > +     return container_of(nb, struct linechanged_fd_state, changed_nb);
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int linechanged_fd_notify(struct notifier_block *nb,
> > > > > > > > +                              unsigned long action, void *data)
> > > > > > > > +{
> > > > > > > > +     struct linechanged_fd_state *lc_state = to_linechanged_fd_state(nb);
> > > > > > > > +     struct gpio_desc *desc = data;
> > > > > > > > +     struct gpioline_changed chg;
> > > > > > > > +     int i, ret;
> > > > > > > > +
> > > > > > > > +     for (i = 0; i < lc_state->numdescs; i++) {
> > > > > > > > +             /* Are we watching this desc? */
> > > > > > > > +             if (desc == lc_state->descs[i]) {
> > > > > > > > +                     /* Yes - prepare the event. */
> > > > > > > > +                     memset(&chg, 0, sizeof(chg));
> > > > > > > > +                     chg.line_offset = gpio_chip_hwgpio(desc);
> > > > > > > > +                     chg.event_type = action;
> > > > > > > > +
> > > > > > > > +                     mutex_lock(&lc_state->lock);
> > > > > > > > +                     ret = kfifo_put(&lc_state->events, chg);
> > > > > > > > +                     mutex_unlock(&lc_state->lock);
> > > > > > > > +                     if (ret)
> > > > > > > > +                             wake_up_poll(&lc_state->waitqueue, EPOLLIN);
> > > > > > > > +
> > > > > > > > +                     return NOTIFY_OK;
> > > > > > > > +             }
> > > > > > > > +     }
> > > > > > > > +
> > > > > > > > +     return NOTIFY_DONE;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int linechanged_fd_create(struct gpio_device *gdev, void __user *ip)
> > > > > > > > +{
> > > > > > > > +     struct gpioline_changed_fd_request changed_req;
> > > > > > > > +     struct linechanged_fd_state *lc_state;
> > > > > > > > +     struct gpio_desc *desc;
> > > > > > > > +     struct file *file;
> > > > > > > > +     int ret, i, fd;
> > > > > > > > +     u32 offset;
> > > > > > > > +
> > > > > > > > +     ret = copy_from_user(&changed_req, ip, sizeof(changed_req));
> > > > > > > > +     if (ret)
> > > > > > > > +             return -EFAULT;
> > > > > > > > +
> > > > > > > > +     if ((changed_req.num_lines == 0) ||
> > > > > > > > +         (changed_req.num_lines > GPIOHANDLES_MAX))
> > > > > > > > +             return -EINVAL;
> > > > > > > > +
> > > > > > > > +     lc_state = kzalloc(sizeof(*lc_state), GFP_KERNEL);
> > > > > > > > +     if (!lc_state)
> > > > > > > > +             return -ENOMEM;
> > > > > > > > +
> > > > > > > > +     lc_state->gdev = gdev;
> > > > > > > > +     get_device(&gdev->dev);
> > > > > > > > +
> > > > > > > > +     for (i = 0; i < changed_req.num_lines; i++) {
> > > > > > > > +             offset = changed_req.lineoffsets[i];
> > > > > > > > +             desc = gpiochip_get_desc(gdev->chip, offset);
> > > > > > > > +             if (IS_ERR(desc)) {
> > > > > > > > +                     ret = PTR_ERR(desc);
> > > > > > > > +                     goto out_free_lc_state;
> > > > > > > > +             }
> > > > > > > > +
> > > > > > > > +             lc_state->descs[i] = desc;
> > > > > > > > +     }
> > > > > > > > +
> > > > > > > > +     lc_state->numdescs = changed_req.num_lines;
> > > > > > > > +
> > > > > > > > +     init_waitqueue_head(&lc_state->waitqueue);
> > > > > > > > +     INIT_KFIFO(lc_state->events);
> > > > > > > > +     mutex_init(&lc_state->lock);
> > > > > > > > +
> > > > > > > > +     lc_state->changed_nb.notifier_call = linechanged_fd_notify;
> > > > > > > > +
> > > > > > > > +     ret = atomic_notifier_chain_register(&gdev->notifier,
> > > > > > > > +                                          &lc_state->changed_nb);
> > > > > > > > +     if (ret)
> > > > > > > > +             goto out_free_lc_state;
> > > > > > > > +
> > > > > > > > +     fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
> > > > > > > > +     if (fd < 0) {
> > > > > > > > +             ret = fd;
> > > > > > > > +             goto out_unregister_notifier;
> > > > > > > > +     }
> > > > > > > > +
> > > > > > > > +     file = anon_inode_getfile("gpio-line-changed-fd",
> > > > > > > > +                               &linechanged_fd_fileops,
> > > > > > > > +                               lc_state, O_RDONLY | O_CLOEXEC);
> > > > > > > > +     if (IS_ERR(file)) {
> > > > > > > > +             ret = PTR_ERR(file);
> > > > > > > > +             goto out_put_unused_fd;
> > > > > > > > +     }
> > > > > > > > +
> > > > > > > > +     changed_req.fd = fd;
> > > > > > > > +     ret = copy_to_user(ip, &changed_req, sizeof(changed_req));
> > > > > > > > +     if (ret) {
> > > > > > > > +             fput(file);
> > > > > > > > +             put_unused_fd(fd);
> > > > > > > > +             return -EFAULT;
> > > > > > > > +     }
> > > > > > > > +
> > > > > > > > +     fd_install(fd, file);
> > > > > > > > +
> > > > > > > > +     return 0;
> > > > > > > > +
> > > > > > > > +out_put_unused_fd:
> > > > > > > > +     put_unused_fd(fd);
> > > > > > > > +out_unregister_notifier:
> > > > > > > > +     atomic_notifier_chain_unregister(&gdev->notifier,
> > > > > > > > +                                      &lc_state->changed_nb);
> > > > > > > > +out_free_lc_state:
> > > > > > > > +     kfree(lc_state);
> > > > > > > > +
> > > > > > > > +     return ret;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > >  /*
> > > > > > > >   * gpio_ioctl() - ioctl handler for the GPIO chardev
> > > > > > > >   */
> > > > > > > > @@ -1238,6 +1447,8 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
> > > > > > > >               return linehandle_create(gdev, ip);
> > > > > > > >       } else if (cmd == GPIO_GET_LINEEVENT_IOCTL) {
> > > > > > > >               return lineevent_create(gdev, ip);
> > > > > > > > +     } else if (cmd == GPIO_GET_LINECHANGED_FD_IOCTL) {
> > > > > > > > +             return linechanged_fd_create(gdev, ip);
> > > > > > > >       }
> > > > > > > >       return -EINVAL;
> > > > > > > >  }
> > > > > > > > @@ -1499,6 +1710,8 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
> > > > > > > >       for (i = 0; i < chip->ngpio; i++)
> > > > > > > >               gdev->descs[i].gdev = gdev;
> > > > > > > >
> > > > > > > > +     ATOMIC_INIT_NOTIFIER_HEAD(&gdev->notifier);
> > > > > > > > +
> > > > > > > >  #ifdef CONFIG_PINCTRL
> > > > > > > >       INIT_LIST_HEAD(&gdev->pin_ranges);
> > > > > > > >  #endif
> > > > > > > > @@ -2837,6 +3050,8 @@ static int gpiod_request_commit(struct gpio_desc *desc, const char *label)
> > > > > > > >               spin_lock_irqsave(&gpio_lock, flags);
> > > > > > > >       }
> > > > > > > >  done:
> > > > > > > > +     atomic_notifier_call_chain(&desc->gdev->notifier,
> > > > > > > > +                                GPIOLINE_CHANGED_REQUESTED, desc);
> > > > > > > >       spin_unlock_irqrestore(&gpio_lock, flags);
> > > > > > > >       return ret;
> > > > > > > >  }
> > > > > > > > @@ -2934,6 +3149,8 @@ static bool gpiod_free_commit(struct gpio_desc *desc)
> > > > > > > >               ret = true;
> > > > > > > >       }
> > > > > > > >
> > > > > > > > +     atomic_notifier_call_chain(&desc->gdev->notifier,
> > > > > > > > +                                GPIOLINE_CHANGED_RELEASED, desc);
> > > > > > > >       spin_unlock_irqrestore(&gpio_lock, flags);
> > > > > > > >       return ret;
> > > > > > > >  }
> > > > > > > > @@ -3097,6 +3314,7 @@ static int gpio_set_bias(struct gpio_chip *chip, struct gpio_desc *desc)
> > > > > > > >               if (ret != -ENOTSUPP)
> > > > > > > >                       return ret;
> > > > > > > >       }
> > > > > > > > +
> > > > > > > >       return 0;
> > > > > > > >  }
> > > > > > > >
> > > > > > > > diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
> > > > > > > > index a1cbeabadc69..8e3969616cfe 100644
> > > > > > > > --- a/drivers/gpio/gpiolib.h
> > > > > > > > +++ b/drivers/gpio/gpiolib.h
> > > > > > > > @@ -54,6 +54,7 @@ struct gpio_device {
> > > > > > > >       const char              *label;
> > > > > > > >       void                    *data;
> > > > > > > >       struct list_head        list;
> > > > > > > > +     struct atomic_notifier_head notifier;
> > > > > > > >
> > > > > > > >  #ifdef CONFIG_PINCTRL
> > > > > > > >       /*
> > > > > > > > diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h
> > > > > > > > index 799cf823d493..c61429467dd4 100644
> > > > > > > > --- a/include/uapi/linux/gpio.h
> > > > > > > > +++ b/include/uapi/linux/gpio.h
> > > > > > > > @@ -59,6 +59,40 @@ struct gpioline_info {
> > > > > > > >  /* Maximum number of requested handles */
> > > > > > > >  #define GPIOHANDLES_MAX 64
> > > > > > > >
> > > > > > > > +/**
> > > > > > > > + * struct gpioline_changed_fd_request - Information about a linechanged fd
> > > > > > > > + * request
> > > > > > > > + * @lineoffsets: an array of desired lines, specified by offset index for the
> > > > > > > > + * associated GPIO device
> > > > > > > > + * @num_lines: number of lines requested in this request, i.e. the number of
> > > > > > > > + * valid fields in the above arrays, set to 1 to request a single line
> > > > > > > > + * @fd: if successful this field will contain a valid anonymous file handle
> > > > > > > > + */
> > > > > > > > +struct gpioline_changed_fd_request {
> > > > > > > > +     __u32 lineoffsets[GPIOHANDLES_MAX];
> > > > > > > > +     __u32 num_lines;
> > > > > > > > +     int fd;
> > > > > > > > +};
> > > > > > > > +
> > > > > > >
> > > > > > > Wouldn't the most common case be to watch all the lines on a chip?
> > > > > > > How about an easy way to do that, say num_lines=0?
> > > > > > >
> > > > > >
> > > > > > IMO this is too implicit - it's literally a magic value. I'd prefer to
> > > > > > keep it this way for the same reason I didn't want to have implicit
> > > > > > BIAS settings. I prefer the kernel uAPI to be explicit and then we can
> > > > > > wrap it in simple helpers in the library.
> > > > > >
> > > > >
> > > > > Or you could add a watch_all flag to make it explicit.
> > > > > But fair enough to leave as is - it probably keeps the kernel cleaner.
> > > > >
> > > > > > > > +/* Possible line status change events */
> > > > > > > > +enum {
> > > > > > > > +     GPIOLINE_CHANGED_REQUESTED = 1,
> > > > > > > > +     GPIOLINE_CHANGED_RELEASED,
> > > > > > > > +     GPIOLINE_CHANGED_CONFIG,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +/**
> > > > > > > > + * struct gpioline_changed - Information about a change in status
> > > > > > > > + * of a GPIO line
> > > > > > > > + * @line_offset: offset of the line that changed relative to the gpiochip
> > > > > > > > + * @event_type: one of GPIOLINE_CHANGED_REQUESTED, GPIOLINE_CHANGED_RELEASED
> > > > > > > > + * and GPIOLINE_CHANGED_CONFIG
> > > > > > > > + */
> > > > > > > > +struct gpioline_changed {
> > > > > > > > +     __u32 line_offset;
> > > > > > > > +     __u32 event_type;
> > > > > > > > +};
> > > > > > > > +
> > > > > > >
> > > > > > > Rather than sending an event type, and requiring userspace to poll
> > > > > > > LINEINFO, which is racy, how about passing the updated info flags here?
> > > > > > > A change in the state of the GPIOLINE_FLAG_KERNEL implies the
> > > > > > > GPIOLINE_CHANGED_REQUESTED or GPIOLINE_CHANGED_RELEASED, so the
> > > > > > > event_type is then redundant.
> > > > > > > Userspace would then only have to poll LINEINFO if they were interested
> > > > > > > in the consumer on GPIOLINE_CHANGED_REQUESTED.
> > > > > > >
> > > > > > > To sync kernel and userspace state the current state of each line
> > > > > > > should be returned immediately via the fd as soon as the fd is created,
> > > > > > > and then subsequently on any change.
> > > > > > >
> > > > > >
> > > > > > I guess you're right. You even made me think we could go as far as to
> > > > > > embed the whole gpioline_info structure in struct gpioline_changed.
> > > > > > I'd still keep the event type though - otherwise we'd have to assume
> > > > > > the user always calls LINEINFO_IOCTL before obtaining the LINECHANGED
> > > > > > fd.
> > > > > >
> > > > >
> > > > > I suggested sending the current state of each line as soon as the fd
> > > > > is created so that you don't have to assume anything.  That initial change
> > > > > report is effectively the same as having the user call LINEINFO on each
> > > > > line at the same time - without all the race issues.
> > > > >
> > > >
> > > > Right, I didn't get this. That means you'd have to call the ioctl()
> > > > and immediately follow up with a read(). I'm not a fan of this.
> > > > Especially if we were to include a timestamp - what would it refer to?
> > > >
> > > > > I also considered the full gpioline_info structure, as well as reporting
> > > > > bulk line changes (replacing line_offset with lineoffsets and num_lines),
> > > > > but then I thought it was probably better to keep it minimal and simple.
> > > > > The name and consumer are relatively large.
> > > >
> > > > In terms of performance - we're not really degrading it as this is
> > > > still not a lot of data.
> > > >
> > > > How about the following:
> > > > 1. Move the code filling out the struct gpioline_info to a separate
> > > > function in the kernel.
> > > > 2. Call the new ioctl() GET_LINEINFO_FD to indicate it's an extension
> > > > of GET_LINEINFO.
> > > > 3. Embed struct gpioline_info in struct gpioline_info_fd so that the
> > > > initial info be read when the file descriptor is created.
> > > > 4. Likewise embed struct gpioline_info in struct gpioline_changed and
> > > > on every status change event provide the whole set of information?
> > > >
> > >
> > > You mean an array of info in the ioctl return, along with the fd?
> > > That would work too.
> >
> > I overlooked the fact that we can watch multiple lines. In this case
> > it's either a separate fd for every watched line (not optimal) or
> > doing what you proposed: read the initial lineinfo directly from the
> > fd. But in this case again: what about the timestamp?
> >
>
> It is set to the time the fd was created.
> If you want you could also return that timestamp via the ioctl return
> for comparison.
> But most likely the userspace code will just ignore the timestamp for
> those initial num_lines reports - those reports will get special
> treatment anyway.
>
> Those initial reports are really part of the fd request handshake, so
> I would expect the reading and handling of them to be part of the fd
> request function in libgpiod, and they would be hidden from the end user.
> The fd would only be returned to the user after the initial reports
> have already been read and the line states synchronised.
> OTOH I haven't put much thought into how the libgpiod API would look...

So I can imagine a situation where we'd run into problems with this:
when we start watching the maximum number of lines - 64 - the kfifo
would be filled with reports from the start and we'd risk missing some
later ones if we don't make this kfifo much larger and if the user
doesn't manage to consume them all fast.

How about reusing the already existing file descriptor associated with
the chip itself? We currently only implement the ioctl() operation on
it - the poll() and read() callbacks are empty.

We'd need to add two new ioctls(): GPIOLINE_WATCH_IOCTL and
GPIOLINE_UNWATCH_IOCTL. The structures for both would look like this:

struct gpioline_watch_request {
    __u32 lineoffset
    struct gpioline_info info;
};

struct gpioline_unwatch_request {
    __u32 lineoffset;
};

When GPIOLINE_WATCH_IOCTL is called, we'd setup a watch for given
line: the embedded gpioline_info structure would be filled with
initial info and we can now poll the gpiochip descriptor for events
and read them. The event structure would looks like this:

struct gpioline_changed {
    __u32 event_type;
    __u64 timestamp;
    struct gpioline_info info;
};

Calling GPIOLINE_UNWATCH_IOCTL would of course make the kernel stop
emitting events for given line.

Does it make sense?

Bart

>
> Kent.
>
> > Bart
> >
> > >
> > > I'm used to setting up streams like this in a networked environment
> > > where returning data via the stream setup isn't an option, the only
> > > option is to sync via the stream itself, so I overlooked the possibility
> > > of using the ioctl return.
> > >
> > > > > The name is immutable(??), and so is pointless to include.
> > > >
> > > > It is now, but let's be future-proof. I can imagine having modifiable
> > > > line names in the future. The code putting this info in struct
> > > > gpioline_info wouldn't be really duplicated and the size of such small
> > > > structures doesn't matter much - it's still a single context switch to
> > > > read it.
> > > >
> > > > > The consumer only changes when the line is requested, so I was willing
> > > > > to live with still having to poll for that.
> > > > > And what you gain by reporting bulk lines you might lose in increased
> > > > > report size and associated code.  OTOH it would make it explicit which
> > > > > lines are being changed together...
> > > > > So I could well be wrong on that - a full bulk report may be better.
> > > >
> > > > I'm not sure we need bulk reporting - just as we don't provide bulk
> > > > GET_GPIOLINE_INFO. The corresponding ioctl() structure would get
> > > > pretty complicated soon.
> > > >
> > >
> > > That was my initial feeling as well.
> > > And bulk is no longer an option if you want to include name in the change
> > > report.
> > >
> > > Kent.
> > >
> > > > Bartosz
> > > >
> > > > >
> > > > > Kent.
> > > > >
> > > > > > > And a timestamp might be useful, as per gpioevent_data?
> > > > > >
> > > > > > Sure thing!
> > > > > >
> > > > > > Bart
> > > > > >
> > > > > > >
> > > > > > > Kent.
> > > > > > >
> > > > > > > >  /* Linerequest flags */
> > > > > > > >  #define GPIOHANDLE_REQUEST_INPUT     (1UL << 0)
> > > > > > > >  #define GPIOHANDLE_REQUEST_OUTPUT    (1UL << 1)
> > > > > > > > @@ -176,6 +210,8 @@ struct gpioevent_data {
> > > > > > > >
> > > > > > > >  #define GPIO_GET_CHIPINFO_IOCTL _IOR(0xB4, 0x01, struct gpiochip_info)
> > > > > > > >  #define GPIO_GET_LINEINFO_IOCTL _IOWR(0xB4, 0x02, struct gpioline_info)
> > > > > > > > +#define GPIO_GET_LINECHANGED_FD_IOCTL \
> > > > > > > > +             _IOWR(0xB4, 0x0b, struct gpioline_changed_fd_request)
> > > > > > > >  #define GPIO_GET_LINEHANDLE_IOCTL _IOWR(0xB4, 0x03, struct gpiohandle_request)
> > > > > > > >  #define GPIO_GET_LINEEVENT_IOCTL _IOWR(0xB4, 0x04, struct gpioevent_request)
> > > > > > > >
> > > > > > > > --
> > > > > > > > 2.23.0
> > > > > > > >




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux