Re: [PATCH v5 4/4] pinctrl: Ingenic: Add pinctrl driver for X1830.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Zhou,


Le lun., nov. 25, 2019 at 19:44, Zhou Yanjie <zhouyanjie@xxxxxxxx> a écrit :
Add support for probing the pinctrl-ingenic driver on the
X1830 Soc from Ingenic.

Signed-off-by: Zhou Yanjie <zhouyanjie@xxxxxxxx>
---

Notes:
    v2:
    New patch.

    v2->v3:
    Add pinctrl drivers for the PWM of X1830.

    v3->v4:
    1.Use local variables to streamline code.
    2.Prevents processors older than X1830 from being
      configured in HiZ mode.

    v4->v5:
    Fix compile-time warnings.
    Reported-by: kbuild test robot <lkp@xxxxxxxxx>

drivers/pinctrl/pinctrl-ingenic.c | 345 +++++++++++++++++++++++++++++++++++---
 1 file changed, 324 insertions(+), 21 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 1a99715..1b84b7f 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -28,6 +28,10 @@
 #define GPIO_PIN	0x00
 #define GPIO_MSK	0x20

+#define GPIO_HIZ		0x00
+#define GPIO_PULLUP		0x01
+#define GPIO_PULLDOWN	0x10
+
 #define JZ4740_GPIO_DATA	0x10
 #define JZ4740_GPIO_PULL_DIS	0x30
 #define JZ4740_GPIO_FUNC	0x40
@@ -45,6 +49,11 @@
 #define X1000_GPIO_PZ_BASE		0x700
 #define X1000_GPIO_PZ_GID2LD	0x7f0

+#define X1830_GPIO_PEL0			0x110
+#define X1830_GPIO_PEL1			0x120
+#define X1830_GPIO_PZ_BASE		0x7000
+#define X1830_GPIO_PZ_GID2LD	0x70f0
+
 #define REG_SET(x) ((x) + 0x4)
 #define REG_CLEAR(x) ((x) + 0x8)

@@ -60,6 +69,7 @@ enum jz_version {
 	ID_X1000,
 	ID_X1000E,
 	ID_X1500,
+	ID_X1830,
 };

 struct ingenic_chip_info {
@@ -1394,6 +1404,220 @@ static const struct ingenic_chip_info x1500_chip_info = {
 	.pull_downs = x1000_pull_downs,
 };

+static const u32 x1830_pull_ups[4] = {
+	0x5fdfffc0, 0xffffefff, 0x1ffffbff, 0x0fcff3fc,
+};
+
+static const u32 x1830_pull_downs[4] = {
+	0x5fdfffc0, 0xffffefff, 0x1ffffbff, 0x0fcff3fc,
+};
+
+static int x1830_uart0_data_pins[] = { 0x33, 0x36, };
+static int x1830_uart0_hwflow_pins[] = { 0x34, 0x35, };
+static int x1830_uart1_data_pins[] = { 0x38, 0x37, };
+static int x1830_sfc_pins[] = { 0x17, 0x18, 0x1a, 0x19, 0x1b, 0x1c, };
+static int x1830_ssi0_dt_pins[] = { 0x4c, };
+static int x1830_ssi0_dr_pins[] = { 0x4b, };
+static int x1830_ssi0_clk_pins[] = { 0x4f, };
+static int x1830_ssi0_gpc_pins[] = { 0x4d, };
+static int x1830_ssi0_ce0_pins[] = { 0x50, };
+static int x1830_ssi0_ce1_pins[] = { 0x4e, };
+static int x1830_ssi1_dt_c_pins[] = { 0x53, };
+static int x1830_ssi1_dr_c_pins[] = { 0x54, };
+static int x1830_ssi1_clk_c_pins[] = { 0x57, };
+static int x1830_ssi1_gpc_c_pins[] = { 0x55, };
+static int x1830_ssi1_ce0_c_pins[] = { 0x58, };
+static int x1830_ssi1_ce1_c_pins[] = { 0x56, };
+static int x1830_ssi1_dt_d_pins[] = { 0x62, };
+static int x1830_ssi1_dr_d_pins[] = { 0x63, };
+static int x1830_ssi1_clk_d_pins[] = { 0x66, };
+static int x1830_ssi1_gpc_d_pins[] = { 0x64, };
+static int x1830_ssi1_ce0_d_pins[] = { 0x67, };
+static int x1830_ssi1_ce1_d_pins[] = { 0x65, };
+static int x1830_mmc0_1bit_pins[] = { 0x24, 0x25, 0x20, };
+static int x1830_mmc0_4bit_pins[] = { 0x21, 0x22, 0x23, };
+static int x1830_mmc1_1bit_pins[] = { 0x42, 0x43, 0x44, };
+static int x1830_mmc1_4bit_pins[] = { 0x45, 0x46, 0x47, };
+static int x1830_i2c0_pins[] = { 0x0c, 0x0d, };
+static int x1830_i2c1_pins[] = { 0x39, 0x3a, };
+static int x1830_i2c2_pins[] = { 0x5b, 0x5c, };
+static int x1830_pwm_pwm0_b_pins[] = { 0x31, };
+static int x1830_pwm_pwm0_c_pins[] = { 0x4b, };
+static int x1830_pwm_pwm1_b_pins[] = { 0x32, };
+static int x1830_pwm_pwm1_c_pins[] = { 0x4c, };
+static int x1830_pwm_pwm2_c_8_pins[] = { 0x48, };
+static int x1830_pwm_pwm2_c_13_pins[] = { 0x4d, };
+static int x1830_pwm_pwm3_c_9_pins[] = { 0x49, };
+static int x1830_pwm_pwm3_c_14_pins[] = { 0x4e, };
+static int x1830_pwm_pwm4_c_15_pins[] = { 0x4f, };
+static int x1830_pwm_pwm4_c_25_pins[] = { 0x59, };
+static int x1830_pwm_pwm5_c_16_pins[] = { 0x50, };
+static int x1830_pwm_pwm5_c_26_pins[] = { 0x5a, };
+static int x1830_pwm_pwm6_c_17_pins[] = { 0x51, };
+static int x1830_pwm_pwm6_c_27_pins[] = { 0x5b, };
+static int x1830_pwm_pwm7_c_18_pins[] = { 0x52, };
+static int x1830_pwm_pwm7_c_28_pins[] = { 0x5c, };
+static int x1830_mac_pins[] = {
+	0x29, 0x30, 0x2f, 0x28, 0x2e, 0x2d, 0x2a, 0x2b, 0x26, 0x27,
+};
+
+static int x1830_uart0_data_funcs[] = { 0, 0, };
+static int x1830_uart0_hwflow_funcs[] = { 0, 0, };
+static int x1830_uart1_data_funcs[] = { 0, 0, };
+static int x1830_sfc_funcs[] = { 1, 1, 1, 1, 1, 1, };
+static int x1830_ssi0_dt_funcs[] = { 0, };
+static int x1830_ssi0_dr_funcs[] = { 0, };
+static int x1830_ssi0_clk_funcs[] = { 0, };
+static int x1830_ssi0_gpc_funcs[] = { 0, };
+static int x1830_ssi0_ce0_funcs[] = { 0, };
+static int x1830_ssi0_ce1_funcs[] = { 0, };
+static int x1830_ssi1_dt_c_funcs[] = { 1, };
+static int x1830_ssi1_dr_c_funcs[] = { 1, };
+static int x1830_ssi1_clk_c_funcs[] = { 1, };
+static int x1830_ssi1_gpc_c_funcs[] = { 1, };
+static int x1830_ssi1_ce0_c_funcs[] = { 1, };
+static int x1830_ssi1_ce1_c_funcs[] = { 1, };
+static int x1830_ssi1_dt_d_funcs[] = { 2, };
+static int x1830_ssi1_dr_d_funcs[] = { 2, };
+static int x1830_ssi1_clk_d_funcs[] = { 2, };
+static int x1830_ssi1_gpc_d_funcs[] = { 2, };
+static int x1830_ssi1_ce0_d_funcs[] = { 2, };
+static int x1830_ssi1_ce1_d_funcs[] = { 2, };
+static int x1830_mmc0_1bit_funcs[] = { 0, 0, 0, };
+static int x1830_mmc0_4bit_funcs[] = { 0, 0, 0, };
+static int x1830_mmc1_1bit_funcs[] = { 0, 0, 0, };
+static int x1830_mmc1_4bit_funcs[] = { 0, 0, 0, };
+static int x1830_i2c0_funcs[] = { 1, 1, };
+static int x1830_i2c1_funcs[] = { 0, 0, };
+static int x1830_i2c2_funcs[] = { 1, 1, };
+static int x1830_pwm_pwm0_b_funcs[] = { 0, };
+static int x1830_pwm_pwm0_c_funcs[] = { 1, };
+static int x1830_pwm_pwm1_b_funcs[] = { 0, };
+static int x1830_pwm_pwm1_c_funcs[] = { 1, };
+static int x1830_pwm_pwm2_c_8_funcs[] = { 0, };
+static int x1830_pwm_pwm2_c_13_funcs[] = { 1, };
+static int x1830_pwm_pwm3_c_9_funcs[] = { 0, };
+static int x1830_pwm_pwm3_c_14_funcs[] = { 1, };
+static int x1830_pwm_pwm4_c_15_funcs[] = { 1, };
+static int x1830_pwm_pwm4_c_25_funcs[] = { 0, };
+static int x1830_pwm_pwm5_c_16_funcs[] = { 1, };
+static int x1830_pwm_pwm5_c_26_funcs[] = { 0, };
+static int x1830_pwm_pwm6_c_17_funcs[] = { 1, };
+static int x1830_pwm_pwm6_c_27_funcs[] = { 0, };
+static int x1830_pwm_pwm7_c_18_funcs[] = { 1, };
+static int x1830_pwm_pwm7_c_28_funcs[] = { 0, };
+static int x1830_mac_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, };
+
+static const struct group_desc x1830_groups[] = {
+	INGENIC_PIN_GROUP("uart0-data", x1830_uart0_data),
+	INGENIC_PIN_GROUP("uart0-hwflow", x1830_uart0_hwflow),
+	INGENIC_PIN_GROUP("uart1-data", x1830_uart1_data),
+	INGENIC_PIN_GROUP("sfc", x1830_sfc),
+	INGENIC_PIN_GROUP("ssi0-dt", x1830_ssi0_dt),
+	INGENIC_PIN_GROUP("ssi0-dr", x1830_ssi0_dr),
+	INGENIC_PIN_GROUP("ssi0-clk", x1830_ssi0_clk),
+	INGENIC_PIN_GROUP("ssi0-gpc", x1830_ssi0_gpc),
+	INGENIC_PIN_GROUP("ssi0-ce0", x1830_ssi0_ce0),
+	INGENIC_PIN_GROUP("ssi0-ce1", x1830_ssi0_ce1),
+	INGENIC_PIN_GROUP("ssi1-dt-c", x1830_ssi1_dt_c),
+	INGENIC_PIN_GROUP("ssi1-dr-c", x1830_ssi1_dr_c),
+	INGENIC_PIN_GROUP("ssi1-clk-c", x1830_ssi1_clk_c),
+	INGENIC_PIN_GROUP("ssi1-gpc-c", x1830_ssi1_gpc_c),
+	INGENIC_PIN_GROUP("ssi1-ce0-c", x1830_ssi1_ce0_c),
+	INGENIC_PIN_GROUP("ssi1-ce1-c", x1830_ssi1_ce1_c),
+	INGENIC_PIN_GROUP("ssi1-dt-d", x1830_ssi1_dt_d),
+	INGENIC_PIN_GROUP("ssi1-dr-d", x1830_ssi1_dr_d),
+	INGENIC_PIN_GROUP("ssi1-clk-d", x1830_ssi1_clk_d),
+	INGENIC_PIN_GROUP("ssi1-gpc-d", x1830_ssi1_gpc_d),
+	INGENIC_PIN_GROUP("ssi1-ce0-d", x1830_ssi1_ce0_d),
+	INGENIC_PIN_GROUP("ssi1-ce1-d", x1830_ssi1_ce1_d),
+	INGENIC_PIN_GROUP("mmc0-1bit", x1830_mmc0_1bit),
+	INGENIC_PIN_GROUP("mmc0-4bit", x1830_mmc0_4bit),
+	INGENIC_PIN_GROUP("mmc1-1bit", x1830_mmc1_1bit),
+	INGENIC_PIN_GROUP("mmc1-4bit", x1830_mmc1_4bit),
+	INGENIC_PIN_GROUP("i2c0-data", x1830_i2c0),
+	INGENIC_PIN_GROUP("i2c1-data", x1830_i2c1),
+	INGENIC_PIN_GROUP("i2c2-data", x1830_i2c2),
+	INGENIC_PIN_GROUP("pwm0-b", x1830_pwm_pwm0_b),
+	INGENIC_PIN_GROUP("pwm0-c", x1830_pwm_pwm0_c),
+	INGENIC_PIN_GROUP("pwm1-b", x1830_pwm_pwm1_b),
+	INGENIC_PIN_GROUP("pwm1-c", x1830_pwm_pwm1_c),
+	INGENIC_PIN_GROUP("pwm2-c-8", x1830_pwm_pwm2_c_8),
+	INGENIC_PIN_GROUP("pwm2-c-13", x1830_pwm_pwm2_c_13),
+	INGENIC_PIN_GROUP("pwm3-c-9", x1830_pwm_pwm3_c_9),
+	INGENIC_PIN_GROUP("pwm3-c-14", x1830_pwm_pwm3_c_14),
+	INGENIC_PIN_GROUP("pwm4-c-15", x1830_pwm_pwm4_c_15),
+	INGENIC_PIN_GROUP("pwm4-c-25", x1830_pwm_pwm4_c_25),
+	INGENIC_PIN_GROUP("pwm5-c-16", x1830_pwm_pwm5_c_16),
+	INGENIC_PIN_GROUP("pwm5-c-26", x1830_pwm_pwm5_c_26),
+	INGENIC_PIN_GROUP("pwm6-c-17", x1830_pwm_pwm6_c_17),
+	INGENIC_PIN_GROUP("pwm6-c-27", x1830_pwm_pwm6_c_27),
+	INGENIC_PIN_GROUP("pwm7-c-18", x1830_pwm_pwm7_c_18),
+	INGENIC_PIN_GROUP("pwm7-c-28", x1830_pwm_pwm7_c_28),
+	INGENIC_PIN_GROUP("mac", x1830_mac),
+};
+
+static const char *x1830_uart0_groups[] = { "uart0-data", "uart0-hwflow", };
+static const char *x1830_uart1_groups[] = { "uart1-data", };
+static const char *x1830_sfc_groups[] = { "sfc", };
+static const char *x1830_ssi0_groups[] = {
+ "ssi0-dt", "ssi0-dr", "ssi0-clk", "ssi0-gpc", "ssi0-ce0", "ssi0-ce1",
+};
+static const char *x1830_ssi1_groups[] = {
+	"ssi1-dt-c", "ssi1-dt-d",
+	"ssi1-dr-c", "ssi1-dr-d",
+	"ssi1-clk-c", "ssi1-clk-d",
+	"ssi1-gpc-c", "ssi1-gpc-d",
+	"ssi1-ce0-c", "ssi1-ce0-d",
+	"ssi1-ce1-c", "ssi1-ce1-d",
+};
+static const char *x1830_mmc0_groups[] = { "mmc0-1bit", "mmc0-4bit", }; +static const char *x1830_mmc1_groups[] = { "mmc1-1bit", "mmc1-4bit", };
+static const char *x1830_i2c0_groups[] = { "i2c0-data", };
+static const char *x1830_i2c1_groups[] = { "i2c1-data", };
+static const char *x1830_i2c2_groups[] = { "i2c2-data", };
+static const char *x1830_pwm0_groups[] = { "pwm0-b", "pwm0-c", };
+static const char *x1830_pwm1_groups[] = { "pwm1-b", "pwm1-c", };
+static const char *x1830_pwm2_groups[] = { "pwm2-c-8", "pwm2-c-13", }; +static const char *x1830_pwm3_groups[] = { "pwm3-c-9", "pwm3-c-14", }; +static const char *x1830_pwm4_groups[] = { "pwm4-c-15", "pwm4-c-25", }; +static const char *x1830_pwm5_groups[] = { "pwm5-c-16", "pwm5-c-26", }; +static const char *x1830_pwm6_groups[] = { "pwm6-c-17", "pwm6-c-27", }; +static const char *x1830_pwm7_groups[] = { "pwm7-c-18", "pwm7-c-28", };
+static const char *x1830_mac_groups[] = { "mac", };
+
+static const struct function_desc x1830_functions[] = {
+	{ "uart0", x1830_uart0_groups, ARRAY_SIZE(x1830_uart0_groups), },
+	{ "uart1", x1830_uart1_groups, ARRAY_SIZE(x1830_uart1_groups), },
+	{ "sfc", x1830_sfc_groups, ARRAY_SIZE(x1830_sfc_groups), },
+	{ "ssi0", x1830_ssi0_groups, ARRAY_SIZE(x1830_ssi0_groups), },
+	{ "ssi1", x1830_ssi1_groups, ARRAY_SIZE(x1830_ssi1_groups), },
+	{ "mmc0", x1830_mmc0_groups, ARRAY_SIZE(x1830_mmc0_groups), },
+	{ "mmc1", x1830_mmc1_groups, ARRAY_SIZE(x1830_mmc1_groups), },
+	{ "i2c0", x1830_i2c0_groups, ARRAY_SIZE(x1830_i2c0_groups), },
+	{ "i2c1", x1830_i2c1_groups, ARRAY_SIZE(x1830_i2c1_groups), },
+	{ "i2c2", x1830_i2c2_groups, ARRAY_SIZE(x1830_i2c2_groups), },
+	{ "pwm0", x1830_pwm0_groups, ARRAY_SIZE(x1830_pwm0_groups), },
+	{ "pwm1", x1830_pwm1_groups, ARRAY_SIZE(x1830_pwm1_groups), },
+	{ "pwm2", x1830_pwm2_groups, ARRAY_SIZE(x1830_pwm2_groups), },
+	{ "pwm3", x1830_pwm3_groups, ARRAY_SIZE(x1830_pwm3_groups), },
+	{ "pwm4", x1830_pwm4_groups, ARRAY_SIZE(x1830_pwm4_groups), },
+	{ "pwm5", x1830_pwm5_groups, ARRAY_SIZE(x1830_pwm4_groups), },
+	{ "pwm6", x1830_pwm6_groups, ARRAY_SIZE(x1830_pwm4_groups), },
+	{ "pwm7", x1830_pwm7_groups, ARRAY_SIZE(x1830_pwm4_groups), },
+	{ "mac", x1830_mac_groups, ARRAY_SIZE(x1830_mac_groups), },
+};
+
+static const struct ingenic_chip_info x1830_chip_info = {
+	.num_chips = 4,
+	.groups = x1830_groups,
+	.num_groups = ARRAY_SIZE(x1830_groups),
+	.functions = x1830_functions,
+	.num_functions = ARRAY_SIZE(x1830_functions),
+	.pull_ups = x1830_pull_ups,
+	.pull_downs = x1830_pull_downs,
+};
+
static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
 {
 	unsigned int val;
@@ -1422,13 +1646,20 @@ static void ingenic_gpio_shadow_set_bit(struct ingenic_gpio_chip *jzgc,
 	else
 		reg = REG_CLEAR(reg);

- regmap_write(jzgc->jzpc->map, X1000_GPIO_PZ_BASE + reg, BIT(offset));
+	if (jzgc->jzpc->version >= ID_X1830)
+ regmap_write(jzgc->jzpc->map, X1830_GPIO_PZ_BASE + reg, BIT(offset));
+	else
+ regmap_write(jzgc->jzpc->map, X1000_GPIO_PZ_BASE + reg, BIT(offset));
 }

static void ingenic_gpio_shadow_set_bit_load(struct ingenic_gpio_chip *jzgc)
 {
-	regmap_write(jzgc->jzpc->map, X1000_GPIO_PZ_GID2LD,
-			jzgc->gc.base / PINS_PER_GPIO_CHIP);
+	unsigned int offt = jzgc->gc.base / PINS_PER_GPIO_CHIP;
+
+	if (jzgc->jzpc->version >= ID_X1830)
+		regmap_write(jzgc->jzpc->map, X1830_GPIO_PZ_GID2LD, offt);
+	else
+		regmap_write(jzgc->jzpc->map, X1000_GPIO_PZ_GID2LD, offt);
 }

static inline bool ingenic_gpio_get_value(struct ingenic_gpio_chip *jzgc, @@ -1668,25 +1899,36 @@ static inline void ingenic_config_pin(struct ingenic_pinctrl *jzpc,
 		unsigned int pin, u8 reg, bool set)
 {
 	unsigned int idx = pin % PINS_PER_GPIO_CHIP;
-	unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+	unsigned int offt1 = pin / PINS_PER_GPIO_CHIP;
+	unsigned int offt2 = set ? REG_SET(reg) : REG_CLEAR(reg);

-	regmap_write(jzpc->map, offt * 0x100 +
-			(set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx));
+	if (jzpc->version >= ID_X1830)
+		regmap_write(jzpc->map, offt1 * 0x1000 + offt2, BIT(idx));
+	else
+		regmap_write(jzpc->map, offt1 * 0x100 + offt2, BIT(idx));
 }

static inline void ingenic_shadow_config_pin(struct ingenic_pinctrl *jzpc,
 		unsigned int pin, u8 reg, bool set)
 {
 	unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+	unsigned int offt = set ? REG_SET(reg) : REG_CLEAR(reg);

-	regmap_write(jzpc->map, X1000_GPIO_PZ_BASE +
-			(set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx));
+	if (jzpc->version >= ID_X1830)
+		regmap_write(jzpc->map, X1830_GPIO_PZ_BASE + offt, BIT(idx));
+	else
+		regmap_write(jzpc->map, X1000_GPIO_PZ_BASE + offt, BIT(idx));
 }

static inline void ingenic_shadow_config_pin_load(struct ingenic_pinctrl *jzpc,
 		unsigned int pin)
 {
- regmap_write(jzpc->map, X1000_GPIO_PZ_GID2LD, pin / PINS_PER_GPIO_CHIP);
+	unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+
+	if (jzpc->version >= ID_X1830)
+		regmap_write(jzpc->map, X1830_GPIO_PZ_GID2LD, offt);
+	else
+		regmap_write(jzpc->map, X1000_GPIO_PZ_GID2LD, offt);
 }

static inline bool ingenic_get_pin_config(struct ingenic_pinctrl *jzpc, @@ -1696,7 +1938,10 @@ static inline bool ingenic_get_pin_config(struct ingenic_pinctrl *jzpc,
 	unsigned int offt = pin / PINS_PER_GPIO_CHIP;
 	unsigned int val;

-	regmap_read(jzpc->map, offt * 0x100 + reg, &val);
+	if (jzpc->version >= ID_X1830)
+		regmap_read(jzpc->map, offt * 0x1000 + reg, &val);
+	else
+		regmap_read(jzpc->map, offt * 0x100 + reg, &val);

 	return val & BIT(idx);
 }
@@ -1856,13 +2101,56 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
 	return 0;
 }

-static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
-		unsigned int pin, bool enabled)
+static int ingenic_set_bias(struct ingenic_pinctrl *jzpc,
+		unsigned int pin, unsigned int bias)
 {
-	if (jzpc->version >= ID_JZ4760)
-		ingenic_config_pin(jzpc, pin, JZ4760_GPIO_PEN, !enabled);
-	else
-		ingenic_config_pin(jzpc, pin, JZ4740_GPIO_PULL_DIS, !enabled);
+	if (jzpc->version >= ID_X1830) {
+		unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+		unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+
+		if (bias == GPIO_HIZ) {
+			if (idx < (PINS_PER_GPIO_CHIP / 2))
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_CLEAR(X1830_GPIO_PEL0), BIT(idx * 2) * 3);
+			else
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_CLEAR(X1830_GPIO_PEL1), BIT(idx % 16 * 2) * 3);

The hardcoded 16 here is PINS_PER_GPIO_CHIP / 2?

Why not calculate 'idx' with the proper modulo when it's defined, instead of doing (idx % 16 * 2) everytime?


+		} else if (bias == GPIO_PULLUP) {
+			if (idx < (PINS_PER_GPIO_CHIP / 2)) {
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_SET(X1830_GPIO_PEL0), BIT(idx * 2));
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_CLEAR(X1830_GPIO_PEL0), BIT(idx * 2) * 2);
+			} else {
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_SET(X1830_GPIO_PEL1), BIT(idx % 16 * 2));
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_CLEAR(X1830_GPIO_PEL1), BIT(idx % 16 * 2) * 2);
+			}
+		} else {
+			if (idx < (PINS_PER_GPIO_CHIP / 2)) {
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_CLEAR(X1830_GPIO_PEL0), BIT(idx * 2));
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_SET(X1830_GPIO_PEL0), BIT(idx * 2) * 2);
+			} else {
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_CLEAR(X1830_GPIO_PEL1), BIT(idx % 16 * 2));
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_SET(X1830_GPIO_PEL1), BIT(idx % 16 * 2) * 2);
+			}
+		}
+	} else if (jzpc->version >= ID_JZ4760) {
+		if (bias == GPIO_HIZ)
+			return -EINVAL;

Actually this is still not right, because it's now impossible to disable the pull-ups on older JZ SoCs.

I got confused by the "GPIO_HIZ" setting, HiZ mean tristated output GPIO, which is not what this is about and something that Ingenic SoCs don't support. Naming that macro e.g. GPIO_PULL_DIS would be much more representative to its meaning.

Please rename the macro and remove this check (and the other one below).

Cheers,
-Paul


+		ingenic_config_pin(jzpc, pin, JZ4760_GPIO_PEN, !bias);
+	} else {
+		if (bias == GPIO_HIZ)
+			return -EINVAL;
+		ingenic_config_pin(jzpc, pin, JZ4740_GPIO_PULL_DIS, !bias);
+	}
+
+	return 0;
 }

static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, @@ -1872,6 +2160,7 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 	unsigned int idx = pin % PINS_PER_GPIO_CHIP;
 	unsigned int offt = pin / PINS_PER_GPIO_CHIP;
 	unsigned int cfg;
+	int ret;

 	for (cfg = 0; cfg < num_configs; cfg++) {
 		switch (pinconf_to_config_param(configs[cfg])) {
@@ -1889,7 +2178,9 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 		case PIN_CONFIG_BIAS_DISABLE:
 			dev_dbg(jzpc->dev, "disable pull-over for pin P%c%u\n",
 					'A' + offt, idx);
-			ingenic_set_bias(jzpc, pin, false);
+			ret = ingenic_set_bias(jzpc, pin, GPIO_HIZ);
+			if (ret)
+				return ret;
 			break;

 		case PIN_CONFIG_BIAS_PULL_UP:
@@ -1897,7 +2188,9 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 				return -EINVAL;
 			dev_dbg(jzpc->dev, "set pull-up for pin P%c%u\n",
 					'A' + offt, idx);
-			ingenic_set_bias(jzpc, pin, true);
+			ret = ingenic_set_bias(jzpc, pin, GPIO_PULLUP);
+			if (ret)
+				return ret;
 			break;

 		case PIN_CONFIG_BIAS_PULL_DOWN:
@@ -1905,7 +2198,9 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 				return -EINVAL;
 			dev_dbg(jzpc->dev, "set pull-down for pin P%c%u\n",
 					'A' + offt, idx);
-			ingenic_set_bias(jzpc, pin, true);
+			ret = ingenic_set_bias(jzpc, pin, GPIO_PULLDOWN);
+			if (ret)
+				return ret;
 			break;

 		default:
@@ -1987,6 +2282,7 @@ static const struct of_device_id ingenic_pinctrl_of_match[] = { { .compatible = "ingenic,x1000-pinctrl", .data = (void *) ID_X1000 }, { .compatible = "ingenic,x1000e-pinctrl", .data = (void *) ID_X1000E }, { .compatible = "ingenic,x1500-pinctrl", .data = (void *) ID_X1500 }, + { .compatible = "ingenic,x1830-pinctrl", .data = (void *) ID_X1830 },
 	{},
 };

@@ -1996,6 +2292,7 @@ static const struct of_device_id ingenic_gpio_of_match[] __initconst = {
 	{ .compatible = "ingenic,jz4770-gpio", },
 	{ .compatible = "ingenic,jz4780-gpio", },
 	{ .compatible = "ingenic,x1000-gpio", },
+	{ .compatible = "ingenic,x1830-gpio", },
 	{},
 };

@@ -2018,7 +2315,10 @@ static int __init ingenic_gpio_probe(struct ingenic_pinctrl *jzpc,
 		return -ENOMEM;

 	jzgc->jzpc = jzpc;
-	jzgc->reg_base = bank * 0x100;
+	if (jzpc->version >= ID_X1830)
+		jzgc->reg_base = bank * 0x1000;
+	else
+		jzgc->reg_base = bank * 0x100;

jzgc->gc.label = devm_kasprintf(dev, GFP_KERNEL, "GPIO%c", 'A' + bank);
 	if (!jzgc->gc.label)
@@ -2111,7 +2411,9 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
 	else
 		jzpc->version = (enum jz_version)id->driver_data;

-	if (jzpc->version >= ID_X1500)
+	if (jzpc->version >= ID_X1830)
+		chip_info = &x1830_chip_info;
+	else if (jzpc->version >= ID_X1500)
 		chip_info = &x1500_chip_info;
 	else if (jzpc->version >= ID_X1000E)
 		chip_info = &x1000e_chip_info;
@@ -2208,6 +2510,7 @@ static const struct platform_device_id ingenic_pinctrl_ids[] = {
 	{ "x1000-pinctrl", ID_X1000 },
 	{ "x1000e-pinctrl", ID_X1000E },
 	{ "x1500-pinctrl", ID_X1500 },
+	{ "x1830-pinctrl", ID_X1830 },
 	{},
 };

--
2.7.4








[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux