[PATCH] pinctrl: nomadik: db8500: Add mc0_a_2 pin group without direction control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some devices do not make use of the CMD0/DAT0/DAT2 direction control
pins of the MMC/SD card 0 interface. In this case we should leave
those pins unconfigured.

A similar case already exists for "mc1_a_1" vs "mc1_a_2"
when the MC1_FBCLK pin is not used.

Add a new "mc0_a_2" pin group which is equal to "mc0_a_1" except
with the MC0_CMDDIR, MC0_DAT0DIR and MC0_DAT2DIR pins removed.

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
 drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c b/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c
index 726c0b5501fa..b9246e0b4fe2 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c
@@ -391,6 +391,15 @@ static const unsigned mc0_a_1_pins[] = { DB8500_PIN_AC2, /* MC0_CMDDIR */
 					 DB8500_PIN_AA2, /* MC0_DAT2 */
 					 DB8500_PIN_AA1  /* MC0_DAT3 */
 };
+/* MMC/SD card 0 interface without CMD/DAT0/DAT2 direction control */
+static const unsigned mc0_a_2_pins[] = { DB8500_PIN_AA3, /* MC0_FBCLK */
+					 DB8500_PIN_AA4, /* MC0_CLK */
+					 DB8500_PIN_AB2, /* MC0_CMD */
+					 DB8500_PIN_Y4,  /* MC0_DAT0 */
+					 DB8500_PIN_Y2,  /* MC0_DAT1 */
+					 DB8500_PIN_AA2, /* MC0_DAT2 */
+					 DB8500_PIN_AA1  /* MC0_DAT3 */
+};
 /* Often only 4 bits are used, then these are not needed (only used for MMC) */
 static const unsigned mc0_dat47_a_1_pins[] = { DB8500_PIN_W2, /* MC0_DAT4 */
 					       DB8500_PIN_W3, /* MC0_DAT5 */
@@ -670,6 +679,7 @@ static const struct nmk_pingroup nmk_db8500_groups[] = {
 	DB8500_PIN_GROUP(msp0tfstck_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(msp0rfsrck_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(mc0_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(mc0_a_2, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(mc0_dat47_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(mc0dat31dir_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(msp1txrx_a_1, NMK_GPIO_ALT_A),
@@ -828,7 +838,7 @@ DB8500_FUNC_GROUPS(ipi2c, "ipi2c_a_1", "ipi2c_a_2");
  */
 DB8500_FUNC_GROUPS(msp0, "msp0txrx_a_1", "msp0tfstck_a_1", "msp0rfstck_a_1",
 		   "msp0txrx_b_1", "msp0sck_b_1");
-DB8500_FUNC_GROUPS(mc0, "mc0_a_1", "mc0_dat47_a_1", "mc0dat31dir_a_1");
+DB8500_FUNC_GROUPS(mc0, "mc0_a_1", "mc0_a_2", "mc0_dat47_a_1", "mc0dat31dir_a_1");
 /* MSP0 can swap RX/TX like MSP0 but has no SCK pin available */
 DB8500_FUNC_GROUPS(msp1, "msp1txrx_a_1", "msp1_a_1", "msp1txrx_b_1");
 DB8500_FUNC_GROUPS(lcdb, "lcdb_a_1");
-- 
2.23.0




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux