linusw/for-next boot bisection: v5.4-rc4-34-gb0983a8bbfb4 on r8a7795-salvator-x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This automated bisection report was sent to you on the basis  *
* that you may be involved with the breaking commit it has      *
* found.  No manual investigation has been done to verify it,   *
* and the root cause of the problem may be somewhere else.      *
*                                                               *
* If you do send a fix, please include this trailer:            *
*   Reported-by: "kernelci.org bot" <bot@xxxxxxxxxxxx>          *
*                                                               *
* Hope this helps!                                              *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

linusw/for-next boot bisection: v5.4-rc4-34-gb0983a8bbfb4 on r8a7795-salvator-x

Summary:
  Start:      b0983a8bbfb4 Merge branch 'devel' into for-next
  Details:    https://kernelci.org/boot/id/5dbf677159b514c28c138dfe
  Plain log:  https://storage.kernelci.org//linusw/for-next/v5.4-rc4-34-gb0983a8bbfb4/arm64/defconfig/gcc-8/lab-baylibre/boot-r8a7795-salvator-x.txt
  HTML log:   https://storage.kernelci.org//linusw/for-next/v5.4-rc4-34-gb0983a8bbfb4/arm64/defconfig/gcc-8/lab-baylibre/boot-r8a7795-salvator-x.html
  Result:     6a41b6c5fc20 gpio: Add xgs-iproc driver

Checks:
  revert:     PASS
  verify:     PASS

Parameters:
  Tree:       linusw
  URL:        https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git/
  Branch:     for-next
  Target:     r8a7795-salvator-x
  CPU arch:   arm64
  Lab:        lab-baylibre
  Compiler:   gcc-8
  Config:     defconfig
  Test suite: boot

Breaking commit found:

-------------------------------------------------------------------------------
commit 6a41b6c5fc20abced88fa0eed42ae5e5cb70b280
Author: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
Date:   Fri Oct 25 09:27:03 2019 +1300

    gpio: Add xgs-iproc driver
    
    This driver supports the Chip Common A GPIO controller present on a
    number of Broadcom switch ASICs with integrated SoCs. The controller is
    similar to the pinctrl-nsp-gpio and pinctrl-iproc-gpio blocks but
    different enough that a separate driver is required.
    
    This has been ported from Broadcom's XLDK 5.0.3 retaining only the CCA
    support (pinctrl-iproc-gpio covers CCB).
    
    Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
    Link: https://lore.kernel.org/r/20191024202703.8017-3-chris.packham@xxxxxxxxxxxxxxxxxxx
    Acked-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
    Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8ec1f041c98d..e9516393c971 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -155,6 +155,15 @@ config GPIO_BCM_KONA
 	help
 	  Turn on GPIO support for Broadcom "Kona" chips.
 
+config GPIO_BCM_XGS_IPROC
+	tristate "BRCM XGS iProc GPIO support"
+	depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	default ARCH_BCM_IPROC
+	help
+	  Say yes here to enable GPIO support for Broadcom XGS iProc SoCs.
+
 config GPIO_BRCMSTB
 	tristate "BRCMSTB GPIO support"
 	default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 84e05701f500..34eb8b2b12dd 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_ASPEED)		+= gpio-aspeed.o
 obj-$(CONFIG_GPIO_ASPEED_SGPIO)		+= gpio-aspeed-sgpio.o
 obj-$(CONFIG_GPIO_ATH79)		+= gpio-ath79.o
 obj-$(CONFIG_GPIO_BCM_KONA)		+= gpio-bcm-kona.o
+obj-$(CONFIG_GPIO_BCM_XGS_IPROC)	+= gpio-xgs-iproc.o
 obj-$(CONFIG_GPIO_BD70528)		+= gpio-bd70528.o
 obj-$(CONFIG_GPIO_BD9571MWV)		+= gpio-bd9571mwv.o
 obj-$(CONFIG_GPIO_BRCMSTB)		+= gpio-brcmstb.o
diff --git a/drivers/gpio/gpio-xgs-iproc.c b/drivers/gpio/gpio-xgs-iproc.c
new file mode 100644
index 000000000000..a3fdd95cc9e6
--- /dev/null
+++ b/drivers/gpio/gpio-xgs-iproc.c
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Broadcom
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define IPROC_CCA_INT_F_GPIOINT		BIT(0)
+#define IPROC_CCA_INT_STS		0x20
+#define IPROC_CCA_INT_MASK		0x24
+
+#define IPROC_GPIO_CCA_DIN		0x0
+#define IPROC_GPIO_CCA_DOUT		0x4
+#define IPROC_GPIO_CCA_OUT_EN		0x8
+#define IPROC_GPIO_CCA_INT_LEVEL	0x10
+#define IPROC_GPIO_CCA_INT_LEVEL_MASK	0x14
+#define IPROC_GPIO_CCA_INT_EVENT	0x18
+#define IPROC_GPIO_CCA_INT_EVENT_MASK	0x1C
+#define IPROC_GPIO_CCA_INT_EDGE		0x24
+
+struct iproc_gpio_chip {
+	struct irq_chip irqchip;
+	struct gpio_chip gc;
+	spinlock_t lock;
+	struct device *dev;
+	void __iomem *base;
+	void __iomem *intr;
+};
+
+static inline struct iproc_gpio_chip *
+to_iproc_gpio(struct gpio_chip *gc)
+{
+	return container_of(gc, struct iproc_gpio_chip, gc);
+}
+
+static void iproc_gpio_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 irq = d->irq;
+	u32 irq_type, event_status = 0;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	irq_type = irq_get_trigger_type(irq);
+	if (irq_type & IRQ_TYPE_EDGE_BOTH) {
+		event_status |= BIT(pin);
+		writel_relaxed(event_status,
+			       chip->base + IPROC_GPIO_CCA_INT_EVENT);
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static void iproc_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 irq = d->irq;
+	u32 int_mask, irq_type, event_mask;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	irq_type = irq_get_trigger_type(irq);
+	event_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+	int_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+
+	if (irq_type & IRQ_TYPE_EDGE_BOTH) {
+		event_mask |= 1 << pin;
+		writel_relaxed(event_mask,
+			       chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+	} else {
+		int_mask |= 1 << pin;
+		writel_relaxed(int_mask,
+			       chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static void iproc_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 irq = d->irq;
+	u32 irq_type, int_mask, event_mask;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	irq_type = irq_get_trigger_type(irq);
+	event_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+	int_mask = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+
+	if (irq_type & IRQ_TYPE_EDGE_BOTH) {
+		event_mask &= ~BIT(pin);
+		writel_relaxed(event_mask,
+			       chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+	} else {
+		int_mask &= ~BIT(pin);
+		writel_relaxed(int_mask,
+			       chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+	}
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int iproc_gpio_irq_set_type(struct irq_data *d, u32 type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int pin = d->hwirq;
+	unsigned long flags;
+	u32 irq = d->irq;
+	u32 event_pol, int_pol;
+	int ret = 0;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		event_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EDGE);
+		event_pol &= ~BIT(pin);
+		writel_relaxed(event_pol, chip->base + IPROC_GPIO_CCA_INT_EDGE);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		event_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EDGE);
+		event_pol |= BIT(pin);
+		writel_relaxed(event_pol, chip->base + IPROC_GPIO_CCA_INT_EDGE);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		int_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		int_pol &= ~BIT(pin);
+		writel_relaxed(int_pol, chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		int_pol = readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		int_pol |= BIT(pin);
+		writel_relaxed(int_pol, chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		break;
+	default:
+		/* should not come here */
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	if (type & IRQ_TYPE_LEVEL_MASK)
+		irq_set_handler_locked(irq_get_irq_data(irq), handle_level_irq);
+	else if (type & IRQ_TYPE_EDGE_BOTH)
+		irq_set_handler_locked(irq_get_irq_data(irq), handle_edge_irq);
+
+out_unlock:
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	return ret;
+}
+
+static irqreturn_t iproc_gpio_irq_handler(int irq, void *data)
+{
+	struct gpio_chip *gc = (struct gpio_chip *)data;
+	struct iproc_gpio_chip *chip = to_iproc_gpio(gc);
+	int bit;
+	unsigned long int_bits = 0;
+	u32 int_status;
+
+	/* go through the entire GPIOs and handle all interrupts */
+	int_status = readl_relaxed(chip->intr + IPROC_CCA_INT_STS);
+	if (int_status & IPROC_CCA_INT_F_GPIOINT) {
+		u32 event, level;
+
+		/* Get level and edge interrupts */
+		event =
+		    readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT_MASK);
+		event &= readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_EVENT);
+		level = readl_relaxed(chip->base + IPROC_GPIO_CCA_DIN);
+		level ^= readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL);
+		level &=
+		    readl_relaxed(chip->base + IPROC_GPIO_CCA_INT_LEVEL_MASK);
+		int_bits = level | event;
+
+		for_each_set_bit(bit, &int_bits, gc->ngpio)
+			generic_handle_irq(irq_linear_revmap(gc->irq.domain, bit));
+	}
+
+	return int_bits ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int iproc_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *dn = pdev->dev.of_node;
+	struct iproc_gpio_chip *chip;
+	u32 num_gpios;
+	int irq, ret;
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = dev;
+	platform_set_drvdata(pdev, chip);
+	spin_lock_init(&chip->lock);
+
+	chip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(chip->base))
+		return PTR_ERR(chip->base);
+
+	ret = bgpio_init(&chip->gc, dev, 4,
+			 chip->base + IPROC_GPIO_CCA_DIN,
+			 chip->base + IPROC_GPIO_CCA_DOUT,
+			 NULL,
+			 chip->base + IPROC_GPIO_CCA_OUT_EN,
+			 NULL,
+			 0);
+	if (ret) {
+		dev_err(dev, "unable to init GPIO chip\n");
+		return ret;
+	}
+
+	chip->gc.label = dev_name(dev);
+	if (of_property_read_u32(dn, "ngpios", &num_gpios))
+		chip->gc.ngpio = num_gpios;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq > 0) {
+		struct gpio_irq_chip *girq;
+		struct irq_chip *irqc;
+		u32 val;
+
+		irqc = &chip->irqchip;
+		irqc->name = dev_name(dev);
+		irqc->irq_ack = iproc_gpio_irq_ack;
+		irqc->irq_mask = iproc_gpio_irq_mask;
+		irqc->irq_unmask = iproc_gpio_irq_unmask;
+		irqc->irq_set_type = iproc_gpio_irq_set_type;
+
+		chip->intr = devm_platform_ioremap_resource(pdev, 1);
+		if (IS_ERR(chip->intr))
+			return PTR_ERR(chip->intr);
+
+		/* Enable GPIO interrupts for CCA GPIO */
+		val = readl_relaxed(chip->intr + IPROC_CCA_INT_MASK);
+		val |= IPROC_CCA_INT_F_GPIOINT;
+		writel_relaxed(val, chip->intr + IPROC_CCA_INT_MASK);
+
+		/*
+		 * Directly request the irq here instead of passing
+		 * a flow-handler to gpiochip_set_chained_irqchip,
+		 * because the irq is shared.
+		 */
+		ret = devm_request_irq(dev, irq, iproc_gpio_irq_handler,
+				       IRQF_SHARED, chip->gc.label, &chip->gc);
+		if (ret) {
+			dev_err(dev, "Fail to request IRQ%d: %d\n", irq, ret);
+			return ret;
+		}
+
+		girq = &chip->gc.irq;
+		girq->chip = irqc;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->parent_handler = NULL;
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_simple_irq;
+	}
+
+	ret = devm_gpiochip_add_data(dev, &chip->gc, chip);
+	if (ret) {
+		dev_err(dev, "unable to add GPIO chip\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __exit iproc_gpio_remove(struct platform_device *pdev)
+{
+	struct iproc_gpio_chip *chip;
+
+	chip = platform_get_drvdata(pdev);
+	if (!chip)
+		return -ENODEV;
+
+	if (chip->intr) {
+		u32 val;
+
+		val = readl_relaxed(chip->intr + IPROC_CCA_INT_MASK);
+		val &= ~IPROC_CCA_INT_F_GPIOINT;
+		writel_relaxed(val, chip->intr + IPROC_CCA_INT_MASK);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id bcm_iproc_gpio_of_match[] __initconst = {
+	{ .compatible = "brcm,iproc-gpio-cca" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, bcm_iproc_gpio_of_match);
+
+static struct platform_driver bcm_iproc_gpio_driver = {
+	.driver = {
+		.name = "iproc-xgs-gpio",
+		.owner = THIS_MODULE,
+		.of_match_table = bcm_iproc_gpio_of_match,
+	},
+	.probe = iproc_gpio_probe,
+	.remove = iproc_gpio_remove,
+};
+
+module_platform_driver(bcm_iproc_gpio_driver);
+
+MODULE_DESCRIPTION("XGS IPROC GPIO driver");
+MODULE_LICENSE("GPL v2");
-------------------------------------------------------------------------------


Git bisection log:

-------------------------------------------------------------------------------
git bisect start
# good: [7d194c2100ad2a6dded545887d02754948ca5241] Linux 5.4-rc4
git bisect good 7d194c2100ad2a6dded545887d02754948ca5241
# bad: [b0983a8bbfb45d16760b34c23436a3d9b5834dbf] Merge branch 'devel' into for-next
git bisect bad b0983a8bbfb45d16760b34c23436a3d9b5834dbf
# good: [698b8eeaed7287970fc2b6d322618850fd1b1e6c] gpio/mpc8xxx: change irq handler from chained to normal
git bisect good 698b8eeaed7287970fc2b6d322618850fd1b1e6c
# good: [ac4062aa6c811db89ee3bbfd3101af931a50c1ba] gpio: 104-idi-48e: make array register_offset static, makes object smaller
git bisect good ac4062aa6c811db89ee3bbfd3101af931a50c1ba
# good: [d57eb825e0dc6f0b5be78251d69cbf1bdd1db622] gpio: Add RDA Micro GPIO controller support
git bisect good d57eb825e0dc6f0b5be78251d69cbf1bdd1db622
# bad: [6a41b6c5fc20abced88fa0eed42ae5e5cb70b280] gpio: Add xgs-iproc driver
git bisect bad 6a41b6c5fc20abced88fa0eed42ae5e5cb70b280
# good: [1dfc462a54386d8467ff427ef900f553e2e470e3] dt-bindings: gpio: brcm: Add bindings for xgs-iproc
git bisect good 1dfc462a54386d8467ff427ef900f553e2e470e3
# first bad commit: [6a41b6c5fc20abced88fa0eed42ae5e5cb70b280] gpio: Add xgs-iproc driver
-------------------------------------------------------------------------------




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux