Re: [PATCH V2] gpio: mxc: Only getting second IRQ when there is more than one IRQ

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



czw., 19 wrz 2019 o 11:40 Anson Huang <Anson.Huang@xxxxxxx> napisał(a):
>
> On some of i.MX SoCs like i.MX8QXP, there is ONLY one IRQ for each
> GPIO bank, so it is better to check the IRQ count before getting
> second IRQ to avoid below error message during probe:
>
> [    1.070908] gpio-mxc 5d080000.gpio: IRQ index 1 not found
> [    1.077420] gpio-mxc 5d090000.gpio: IRQ index 1 not found
> [    1.083766] gpio-mxc 5d0a0000.gpio: IRQ index 1 not found
> [    1.090122] gpio-mxc 5d0b0000.gpio: IRQ index 1 not found
> [    1.096470] gpio-mxc 5d0c0000.gpio: IRQ index 1 not found
> [    1.102804] gpio-mxc 5d0d0000.gpio: IRQ index 1 not found
> [    1.109144] gpio-mxc 5d0e0000.gpio: IRQ index 1 not found
> [    1.115475] gpio-mxc 5d0f0000.gpio: IRQ index 1 not found
>
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> ---
> Changes since V1:
>         - use local variable irq_count instead or err to avoid confusion.
> ---
>  drivers/gpio/gpio-mxc.c | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
> index 7907a87..c77d474 100644
> --- a/drivers/gpio/gpio-mxc.c
> +++ b/drivers/gpio/gpio-mxc.c
> @@ -411,6 +411,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>  {
>         struct device_node *np = pdev->dev.of_node;
>         struct mxc_gpio_port *port;
> +       int irq_count;
>         int irq_base;
>         int err;
>
> @@ -426,9 +427,15 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>         if (IS_ERR(port->base))
>                 return PTR_ERR(port->base);
>
> -       port->irq_high = platform_get_irq(pdev, 1);
> -       if (port->irq_high < 0)
> -               port->irq_high = 0;
> +       irq_count = platform_irq_count(pdev);
> +       if (irq_count < 0)
> +               return irq_count;
> +
> +       if (irq_count > 1) {
> +               port->irq_high = platform_get_irq(pdev, 1);
> +               if (port->irq_high < 0)
> +                       port->irq_high = 0;
> +       }
>
>         port->irq = platform_get_irq(pdev, 0);
>         if (port->irq < 0)
> --
> 2.7.4
>

Applied, thanks.

Bart




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux