On Thu, 12 Sep 2019, at 17:53, Linus Walleij wrote: > On Thu, Aug 29, 2019 at 8:17 AM Andrew Jeffery <andrew@xxxxxxxx> wrote: > > > Commit 674fa8daa8c9 ("pinctrl: aspeed-g5: Delay acquisition of regmaps") > > was determined to be a partial fix to the problem of acquiring the LPC > > Host Controller and GFX regmaps: The AST2500 pin controller may need to > > fetch syscon regmaps during expression evaluation as well as when > > setting mux state. For example, this case is hit by attempting to export > > pins exposing the LPC Host Controller as GPIOs. > > > > An optional eval() hook is added to the Aspeed pinmux operation struct > > and called from aspeed_sig_expr_eval() if the pointer is set by the > > SoC-specific driver. This enables the AST2500 to perform the custom > > action of acquiring its regmap dependencies as required. > > > > John Wang tested the fix on an Inspur FP5280G2 machine (AST2500-based) > > where the issue was found, and I've booted the fix on Witherspoon > > (AST2500) and Palmetto (AST2400) machines, and poked at relevant pins > > under QEMU by forcing mux configurations via devmem before exporting > > GPIOs to exercise the driver. > > > > Fixes: 7d29ed88acbb ("pinctrl: aspeed: Read and write bits in LPC and GFX controllers") > > Fixes: 674fa8daa8c9 ("pinctrl: aspeed-g5: Delay acquisition of regmaps") > > Reported-by: John Wang <wangzqbj@xxxxxxxxxx> > > Tested-by: John Wang <wangzqbj@xxxxxxxxxx> > > Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx> > > Applied for fixes already yesterday! Thanks! Hoping to avoid such late fixes in the future... Andrew