Re: [PATCH v3 4/5] gpios: Use ngpio property from device tree if available

[Joel Stanley <joel@xxxxxxxxx>]

On Fri, 6 Sep 2019 at 06:27, Rashmica Gupta <rashmica.g@xxxxxxxxx> wrote:
>
> Use the ngpio property from the device tree if it exists. If it doesn't
> then fallback to the hardcoded value in the config.
>
> This is in preparation for adding ast2600 support. The ast2600 SoC has
> two GPIO controllers and so requires two instances of the GPIO driver.
> We use the ngpio property to different between them as they have
> different numbers of GPIOs.
>
> Signed-off-by: Rashmica Gupta <rashmica.g@xxxxxxxxx>

Reviewed-by: Joel Stanley <joel@xxxxxxxxx>

> ---
>  drivers/gpio/gpio-aspeed.c | 18 +++++++++++-------
>  1 file changed, 11 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
> index 16c6eaf70857..c3d5ecba343b 100644
> --- a/drivers/gpio/gpio-aspeed.c
> +++ b/drivers/gpio/gpio-aspeed.c
> @@ -694,7 +694,7 @@ static void set_irq_valid_mask(struct aspeed_gpio *gpio)
>                 for_each_clear_bit(offset, &input, 32) {
>                         unsigned int i = props->bank * 32 + offset;
>
> -                       if (i >= gpio->config->nr_gpios)
> +                       if (i >= gpio->chip.ngpio)
>                                 break;
>
>                         clear_bit(i, gpio->chip.irq.valid_mask);
> @@ -1007,10 +1007,10 @@ int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc,
>         unsigned long flags;
>
>         if (!gpio->cf_copro_bankmap)
> -               gpio->cf_copro_bankmap = kzalloc(gpio->config->nr_gpios >> 3, GFP_KERNEL);
> +               gpio->cf_copro_bankmap = kzalloc(gpio->chip.ngpio >> 3, GFP_KERNEL);
>         if (!gpio->cf_copro_bankmap)
>                 return -ENOMEM;
> -       if (offset < 0 || offset > gpio->config->nr_gpios)
> +       if (offset < 0 || offset > gpio->chip.ngpio)
>                 return -EINVAL;
>         bindex = offset >> 3;
>
> @@ -1055,7 +1055,7 @@ int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc)
>         if (!gpio->cf_copro_bankmap)
>                 return -ENXIO;
>
> -       if (offset < 0 || offset > gpio->config->nr_gpios)
> +       if (offset < 0 || offset > gpio->chip.ngpio)
>                 return -EINVAL;
>         bindex = offset >> 3;
>
> @@ -1119,7 +1119,8 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
>  {
>         const struct of_device_id *gpio_id;
>         struct aspeed_gpio *gpio;
> -       int rc, i, banks;
> +       int rc, i, banks, err;
> +       u32 ngpio;
>
>         gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
>         if (!gpio)
> @@ -1145,7 +1146,10 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
>         gpio->config = gpio_id->data;
>
>         gpio->chip.parent = &pdev->dev;
> -       gpio->chip.ngpio = gpio->config->nr_gpios;
> +       err = of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpio);
> +       gpio->chip.ngpio = (u16) ngpio;
> +       if (err)
> +               gpio->chip.ngpio = gpio->config->nr_gpios;
>         gpio->chip.direction_input = aspeed_gpio_dir_in;
>         gpio->chip.direction_output = aspeed_gpio_dir_out;
>         gpio->chip.get_direction = aspeed_gpio_get_direction;
> @@ -1158,7 +1162,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
>         gpio->chip.base = -1;
>
>         /* Allocate a cache of the output registers */
> -       banks = DIV_ROUND_UP(gpio->config->nr_gpios, 32);
> +       banks = DIV_ROUND_UP(gpio->chip.ngpio, 32);
>         gpio->dcache = devm_kcalloc(&pdev->dev,
>                                     banks, sizeof(u32), GFP_KERNEL);
>         if (!gpio->dcache)
> --
> 2.20.1
>