Re: [PATCH] gpio: pl061: Fix the issue failed to register the ACPI interruption

[Andy Shevchenko <andy.shevchenko@xxxxxxxxx>]

On Mon, Aug 12, 2019 at 2:30 PM Wei Xu <xuwei5@xxxxxxxxxxxxx> wrote:
>
> Invoke acpi_gpiochip_request_interrupts after the acpi data has been
> attached to the pl061 acpi node to register interruption.
>
> Otherwise it will be failed to register interruption for the ACPI case.
> Because in the gpiochip_add_data_with_key, acpi_gpiochip_add is invoked
> after gpiochip_add_irqchip but at that time the acpi data has not been
> attached yet.
>
> Tested with below steps on QEMU v4.1.0-rc3 and Linux kernel v5.3-rc4,
> and found pl061 interruption is missed in the /proc/interrupts:
> 1.
> qemu-system-aarch64 \
> -machine virt,gic-version=3 -cpu cortex-a57 \
> -m 1G,maxmem=4G,slots=4 \
> -kernel Image -initrd rootfs.cpio.gz \
> -net none -nographic  \
> -bios QEMU_EFI.fd  \
> -append "console=ttyAMA0 acpi=force earlycon=pl011,0x9000000"
>
> 2. cat /proc/interrupts in the guest console:
> estuary:/$ cat /proc/interrupts
> CPU0
> 2:       3228     GICv3  27 Level     arch_timer
> 4:         15     GICv3  33 Level     uart-pl011
> 42:          0     GICv3  23 Level     arm-pmu
> IPI0:         0       Rescheduling interrupts
> IPI1:         0       Function call interrupts
> IPI2:         0       CPU stop interrupts
> IPI3:         0       CPU stop (for crash dump) interrupts
> IPI4:         0       Timer broadcast interrupts
> IPI5:         0       IRQ work interrupts
> IPI6:         0       CPU wake-up interrupts
> Err:          0
>
> Fixes: 04ce935c6b2a ("gpio: pl061: Pass irqchip when adding gpiochip")

Linus, I'm wondering if we can do this for all inside the GPIO library.
Thoughts?

--
With Best Regards,
Andy Shevchenko