RE: [PATCH] arm64: dts: ls1028a: fix gpio nodes

[Leo Li <leoyang.li@xxxxxxx>]

> -----Original Message-----
> From: Shawn Guo <shawnguo@xxxxxxxxxx>
> Sent: Monday, August 12, 2019 8:47 AM
> To: Hui Song <hui.song_1@xxxxxxx>; Leo Li <leoyang.li@xxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>; Mark Rutland
> <mark.rutland@xxxxxxx>; Linus Walleij <linus.walleij@xxxxxxxxxx>; Bartosz
> Golaszewski <bgolaszewski@xxxxxxxxxxxx>; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; linux-gpio@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH] arm64: dts: ls1028a: fix gpio nodes
> 
> On Mon, Aug 05, 2019 at 02:57:00PM +0800, Hui Song wrote:
> > From: Song Hui <hui.song_1@xxxxxxx>
> >
> > Update the nodes to include little-endian property to be consistent
> > with the hardware.
> >
> > Signed-off-by: Song Hui <hui.song_1@xxxxxxx>
> 
> @Leo, looks good?

Acked-by: Li Yang <leoyang.li@xxxxxxx>

> 
> Shawn
> 
> > ---
> >  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 9 ++++++---
> >  1 file changed, 6 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > index aef5b06..7ccbbfc 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > @@ -277,33 +277,36 @@
> >  		};
> >
> >  		gpio1: gpio@2300000 {
> > -			compatible = "fsl,qoriq-gpio";
> > +			compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
> >  			reg = <0x0 0x2300000 0x0 0x10000>;
> >  			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> >  			gpio-controller;
> >  			#gpio-cells = <2>;
> >  			interrupt-controller;
> >  			#interrupt-cells = <2>;
> > +			little-endian;
> >  		};
> >
> >  		gpio2: gpio@2310000 {
> > -			compatible = "fsl,qoriq-gpio";
> > +			compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
> >  			reg = <0x0 0x2310000 0x0 0x10000>;
> >  			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> >  			gpio-controller;
> >  			#gpio-cells = <2>;
> >  			interrupt-controller;
> >  			#interrupt-cells = <2>;
> > +			little-endian;
> >  		};
> >
> >  		gpio3: gpio@2320000 {
> > -			compatible = "fsl,qoriq-gpio";
> > +			compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
> >  			reg = <0x0 0x2320000 0x0 0x10000>;
> >  			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> >  			gpio-controller;
> >  			#gpio-cells = <2>;
> >  			interrupt-controller;
> >  			#interrupt-cells = <2>;
> > +			little-endian;
> >  		};
> >
> >  		usb0: usb@3100000 {
> > --
> > 2.9.5
> >