[PATCH] gpio: mt7621: Pass irqchip when adding gpiochip

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion.

This driver requests the IRQ directly in the driver so it
differs a bit from the others.

Cc: René van Dorst <opensource@xxxxxxxxxx>
Cc: Greg Ungerer <gerg@xxxxxxxxxx>
Cc: Nicholas Mc Guire <hofrat@xxxxxxxxx>
Cc: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
Cc: Thierry Reding <treding@xxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
 drivers/gpio/gpio-mt7621.c | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c
index 79654fb2e50f..d1d785f983a7 100644
--- a/drivers/gpio/gpio-mt7621.c
+++ b/drivers/gpio/gpio-mt7621.c
@@ -241,13 +241,6 @@ mediatek_gpio_bank_probe(struct device *dev,
 	if (!rg->chip.label)
 		return -ENOMEM;
 
-	ret = devm_gpiochip_add_data(dev, &rg->chip, mtk);
-	if (ret < 0) {
-		dev_err(dev, "Could not register gpio %d, ret=%d\n",
-			rg->chip.ngpio, ret);
-		return ret;
-	}
-
 	rg->irq_chip.name = dev_name(dev);
 	rg->irq_chip.parent_device = dev;
 	rg->irq_chip.irq_unmask = mediatek_gpio_irq_unmask;
@@ -256,8 +249,10 @@ mediatek_gpio_bank_probe(struct device *dev,
 	rg->irq_chip.irq_set_type = mediatek_gpio_irq_type;
 
 	if (mtk->gpio_irq) {
+		struct gpio_irq_chip *girq;
+
 		/*
-		 * Manually request the irq here instead of passing
+		 * Directly request the irq here instead of passing
 		 * a flow-handler to gpiochip_set_chained_irqchip,
 		 * because the irq is shared.
 		 */
@@ -271,15 +266,21 @@ mediatek_gpio_bank_probe(struct device *dev,
 			return ret;
 		}
 
-		ret = gpiochip_irqchip_add(&rg->chip, &rg->irq_chip,
-					   0, handle_simple_irq, IRQ_TYPE_NONE);
-		if (ret) {
-			dev_err(dev, "failed to add gpiochip_irqchip\n");
-			return ret;
-		}
+		girq = &rg->chip.irq;
+		girq->chip = &rg->irq_chip;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->parent_handler = NULL;
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_simple_irq;
+	}
 
-		gpiochip_set_chained_irqchip(&rg->chip, &rg->irq_chip,
-					     mtk->gpio_irq, NULL);
+	ret = devm_gpiochip_add_data(dev, &rg->chip, mtk);
+	if (ret < 0) {
+		dev_err(dev, "Could not register gpio %d, ret=%d\n",
+			rg->chip.ngpio, ret);
+		return ret;
 	}
 
 	/* set polarity to low for all gpios */
-- 
2.21.0