[PATCH v1 1/2] pinctrl: msm: Switch to use device_property_count_uXX()

[Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>]

Use use device_property_count_uXX() directly, that makes code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/pinctrl/qcom/pinctrl-msm.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 7f35c196bb3e..90bc667139e0 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -617,8 +617,7 @@ static int msm_gpio_init_valid_mask(struct gpio_chip *chip)
 	}
 
 	/* The number of GPIOs in the ACPI tables */
-	len = ret = device_property_read_u16_array(pctrl->dev, "gpios", NULL,
-						   0);
+	len = ret = device_property_count_u16(pctrl->dev, "gpios");
 	if (ret < 0)
 		return 0;
 
@@ -996,7 +995,7 @@ static bool msm_gpio_needs_valid_mask(struct msm_pinctrl *pctrl)
 	if (pctrl->soc->reserved_gpios)
 		return true;
 
-	return device_property_read_u16_array(pctrl->dev, "gpios", NULL, 0) > 0;
+	return device_property_count_u16(pctrl->dev, "gpios") > 0;
 }
 
 static int msm_gpio_init(struct msm_pinctrl *pctrl)
-- 
2.20.1