On Mon, 2019-07-22 at 07:54 +0200, Stefan Wahren wrote: > This series adds minimal support for the new Raspberry Pi 4, so we are able > to login via debug UART. > > Patch 1-5: Prepare platform and DTS for the new SoC BMC2711 > Patch 6-10: Enable support for emmc2 on BCM2711 > Patch 11-12: Enable pinctrl for BCM2711 > Patch 13-17: Add Raspberry Pi 4 DTS support > Patch 18: Update MAINTAINERS > > Unfortunately the Raspberry Pi Foundation didn't released a > peripheral documentation for the new SoC yet. So we only have a preliminary > datasheet [1] and reduced schematics [2]. > > Changes since RFC: > - change BCM2838 -> BCM2711 as discussed in RFC > - update MAINTAINERS accordingly > - drop "spi: bcm2835: enable shared interrupt support" from series > - squash all pinctrl-bcm2835 changes into one patch > - introduce SoC specific clock registration as suggested by Florian > - fix watchdog probing for Raspberry Pi 4 > - convert brcm,bcm2835.txt to json-schema > - move VC4 node to bcm2835-common.dtsi > - fallback to legacy pull config for Raspberry Pi 4 > - revert unintended change of mailbox in bcm283x.dtsi > - add reference for arm64 > > [1] - > https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711/rpi_DATA_2711_1p0_preliminary.pdf > [2] - > https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_4b_4p0_reduced.pdf > > Phil Elwell (1): > ARM: bcm2835: DMA can only address 1GB > > Stefan Wahren (17): > ARM: bcm283x: Reduce register ranges for UART, SPI and I2C > ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi > ARM: dts: bcm283x: Define MMC interfaces at board level > ARM: dts: bcm283x: Define memory at board level > dt-bindings: bcm2835-cprman: Add bcm2711 support > clk: bcm2835: Introduce SoC specific clock registration > clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support > dt-bindings: sdhci-iproc: Add brcm,bcm2711-emmc2 > mmc: sdhci-iproc: Add support for emmc2 of the BCM2711 > dt-bindings: pinctrl: bcm2835: Add brcm,bcm2711 compatible > pinctrl: bcm2835: Add support for BCM2711 pull-up functionality > dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema > dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema > ARM: bcm2835: Add bcm2711 compatible string > ARM: dts: Add minimal Raspberry Pi 4 support > arm64: dts: broadcom: Add reference to RPi 4 B > MAINTAINERS: Add BCM2711 to BCM2835 ARCH Hi Stefan, I rebased your bcm2711-initial branch on top of v5.3-rc1 and got this: [ 2.307920] mmc1: new ultra high speed DDR50 SDHC card at address 59b4 [ 2.314972] mmcblk1: mmc1:59b4 USD 15.0 GiB [ 2.320240] mmcblk1: p1 p2 [ 2.324366] mmc0: new high speed SDIO card at address 0001 [ 2.365315] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.373579] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.381220] devtmpfs: mounted [ 2.386618] Freeing unused kernel memory: 2048K [ 2.394373] Run /sbin/init as init process [ 2.644330] 8<--- cut here --- [ 2.647439] Unable to handle kernel paging request at virtual address bb000000 [ 2.654795] pgd = (ptrval) [ 2.657540] [bb000000] *pgd=00000000 [ 2.661172] Internal error: Oops: 2805 [#1] SMP ARM [ 2.666122] Modules linked in: [ 2.669225] CPU: 0 PID: 86 Comm: kworker/0:1H Not tainted 5.3.0-rc1-00020-g496d90bc72a9 #374 [ 2.677792] Hardware name: BCM2835 [ 2.681254] Workqueue: mmc_complete mmc_blk_mq_complete_work [ 2.687002] PC is at v7_dma_inv_range+0x3c/0x54 [ 2.691602] LR is at __dma_page_dev_to_cpu+0x84/0x104 [ 2.696728] pc : [<c031cfec>] lr : [<c0317468>] psr: 80000013 [ 2.703089] sp : e8081e60 ip : ea059000 fp : 00000000 [ 2.708390] r10: 00000002 r9 : 00000002 r8 : e9fb9000 [ 2.713692] r7 : c1708cc4 r6 : c18cde80 r5 : 00001000 r4 : 00000000 [ 2.720316] r3 : 0000003f r2 : 00000040 r1 : bb001000 r0 : bb000000 [ 2.726942] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 2.734185] Control: 10c5383d Table: 0020406a DAC: 00000051 [ 2.740017] Process kworker/0:1H (pid: 86, stack limit = 0x(ptrval)) [ 2.746466] Stack: (0xe8081e60 to 0xe8082000) [ 2.750891] 1e60: c031d084 ea004480 e928f300 e8053014 00000002 c0319350 c0f015d0 e9196c10 [ 2.759197] 1e80: 00000002 c0317ac4 00000000 c124fc74 0000757d e97fb390 c0317a6c c1704c48 [ 2.767503] 1ea0: e92a60c4 00000000 e97fb2b0 e9782800 e9783800 c0cce770 00000000 ea004480 [ 2.775809] 1ec0: e928f300 e92a6008 e97fb200 c0cc8c68 e92a6008 e97fb200 c1704c48 e92a60c4 [ 2.784115] 1ee0: 00000000 c0cc9040 00000000 e4380000 00000000 ada3354f 28989000 e92a60d8 [ 2.792420] 1f00: e9286080 ea004280 ff7b0200 00000000 c1891c70 00000000 ea004280 c0360eb8 [ 2.800726] 1f20: ffffe000 ea004280 c1703d00 e9286080 ea004280 e9286094 c1703d00 ea004298 [ 2.809032] 1f40: ffffe000 00000008 ea004280 c0361bb4 ffffe000 c18915ac c124ea98 00000000 [ 2.817338] 1f60: ffffe000 e91fc380 e92d3b00 00000000 e8080000 e9286080 c0361b70 e90bfea4 [ 2.825643] 1f80: e91fc39c c0366dac 00000001 e92d3b00 c0366c64 00000000 00000000 00000000 [ 2.833948] 1fa0: 00000000 00000000 00000000 c03010e8 00000000 00000000 00000000 00000000 [ 2.842253] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.850559] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 2.858872] [<c031cfec>] (v7_dma_inv_range) from [<c0317468>] (__dma_page_dev_to_cpu+0x84/0x104) [ 2.867797] [<c0317468>] (__dma_page_dev_to_cpu) from [<c0317ac4>] (arm_dma_unmap_sg+0x58/0x74) [ 2.876635] [<c0317ac4>] (arm_dma_unmap_sg) from [<c0cce770>] (sdhci_post_req+0x5c/0x8c) [ 2.884857] [<c0cce770>] (sdhci_post_req) from [<c0cc8c68>] (mmc_blk_mq_post_req+0x30/0xb4) [ 2.893340] [<c0cc8c68>] (mmc_blk_mq_post_req) from [<c0cc9040>] (mmc_blk_mq_complete_prev_req.part.4+0x174/0x238) [ 2.903855] [<c0cc9040>] (mmc_blk_mq_complete_prev_req.part.4) from [<c0360eb8>] (process_one_work+0x218/0x510) [ 2.914104] [<c0360eb8>] (process_one_work) from [<c0361bb4>] (worker_thread+0x44/0x5c0) [ 2.922323] [<c0361bb4>] (worker_thread) from [<c0366dac>] (kthread+0x148/0x150) [ 2.929836] [<c0366dac>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c) [ 2.937168] Exception stack(0xe8081fb0 to 0xe8081ff8) [ 2.942296] 1fa0: 00000000 00000000 00000000 00000000 [ 2.950601] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.958906] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 2.965623] Code: e1110003 e1c11003 1e071f3e e1500001 (3e070f36) [ 2.971830] ---[ end trace 918fd7aaa4c1e4cc ]--- I'm looking into it. Any ideas? Regards, Nicolas
Attachment:
signature.asc
Description: This is a digitally signed message part
