Hi Linus,
here is the bulk of pin control changes for the v5.3 kernel cycle.
This is pretty linear development in pin control, nothing really
stand out. We had a bit of SPDX fuzz with tglx fixing up tags
with scripts at the same time as maintainers were fixing up the
same tags, but I regard that as a one-off and not a good time
for an exercise in "what can be done differently". Let's resolve
the conflicts and move on (I don't know if there will be any,
don't think so.)
Please pull it in! Technical details in the signed tag.
Yours,
Linus Walleij
The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:
Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
tags/pinctrl-v5.3-1
for you to fetch changes up to 4c105769bf6de29856bf80a4045e6725301c58ce:
pinctrl: aspeed: Strip moved macros and structs from private header
(2019-07-10 11:19:20 +0200)
----------------------------------------------------------------
This is the bulk of pin control changes for the v5.3 kernel
cycle:
Core changes:
- Device links can optionally be added between a pin control
producer and its consumers. This will affect how the system
power management is handled: a pin controller will not suspend
before all of its consumers have been suspended. This was
necessary for the ST Microelectronics STMFX expander and
need to be tested on other systems as well: it makes sense
to make this default in the long run. Right now it is
opt-in per driver.
- Drive strength can be specified in microamps. With decreases
in silicon technology, milliamps isn't granular enough, let's
make it possible to select drive strengths in microamps. Right
now the Meson (AMlogic) driver needs this.
New drivers:
- New subdriver for the Tegra 194 SoC.
- New subdriver for the Qualcomm SDM845.
- New subdriver for the Qualcomm SM8150.
- New subdriver for the Freescale i.MX8MN (Freescale is now a
product line of NXP).
- New subdriver for Marvell MV98DX1135.
Driver improvements:
- The Bitmain BM1880 driver now supports pin config in
addition to muxing.
- The Qualcomm drivers can now reserve some GPIOs as taken
aside and not usable for users. This is used in ACPI systems
to take out some GPIO lines used by the BIOS so that
noone else (neither kernel nor userspace) will play with them
by mistake and crash the machine.
- A slew of refurbishing around the Aspeed drivers (board
management controllers for servers) in preparation for the
new Aspeed AST2600 SoC.
- A slew of improvements over the SH PFC drivers as usual.
- Misc cleanups and fixes.
----------------------------------------------------------------
Alexandre Torgue (4):
pinctrl: stm32: add suspend/resume management
pinctrl: stm32: Enable suspend/resume for stm32mp157c SoC
pinctrl: stm32: add lock mechanism for irqmux selection
dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema
Andrew Jeffery (9):
dt-bindings: pinctrl: aspeed: Split bindings document in two
dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
MAINTAINERS: Add entry for ASPEED pinctrl drivers
pinctrl: aspeed: Correct comment that is no longer true
pinctrl: aspeed: Clarify comment about strapping W1C
pinctrl: aspeed: Split out pinmux from general pinctrl
pinctrl: aspeed: Add implementation-related documentation
pinctrl: aspeed: Strip moved macros and structs from private header
Andy Shevchenko (3):
pinctrl: baytrail: Use defined macro instead of magic in
byt_get_gpio_mux()
pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
pinctrl: baytrail: Use GENMASK() consistently
Anson Huang (3):
dt-bindings: imx: Correct pinfunc head file path for i.MX8MM
dt-bindings: imx: Add pinctrl binding doc for i.MX8MN
pinctrl: freescale: Add i.MX8MN pinctrl driver support
Benjamin Gaignard (2):
pinctrl: Enable device link creation for pin control
pinctrl: stmfx: enable links creations
Bjorn Andersson (1):
pinctrl: qcom: sdm845: Expose ufs_reset as gpio
Charles Keepax (1):
pinctrl: madera: Fixup SPDX headers
Chris Packham (2):
dt-bindings: pinctrl: mvebu: Document bindings for 98DX1135
pinctrl: mvebu: Add support for MV98DX1135
Colin Ian King (1):
dt-bindings: pinctrl: fix spelling mistakes in pinctl documentation
Doug Berger (1):
pinctrl: bcm: Allow PINCTRL_BCM2835 for ARCH_BRCMSTB
Enrico Weigelt (1):
gpio: Fix build warnings on undefined struct pinctrl_dev
Florian Fainelli (1):
dt-bindings: pinctrl: bcm2835-gpio: Document BCM7211 compatible
Geert Uytterhoeven (26):
pinctrl: sh-pfc: Correct printk level of group reference warning
pinctrl: sh-pfc: Mark run-time debug code __init
pinctrl: sh-pfc: Add check for empty pinmux groups/functions
pinctrl: sh-pfc: Validate pin tables at runtime
pinctrl: sh-pfc: Rename 2-parameter CPU_ALL_PORT() variant
pinctrl: sh-pfc: Add SH_PFC_PIN_CFG_PULL_UP_DOWN shorthand
pinctrl: sh-pfc: Move PIN_NONE to shared header file
pinctrl: sh-pfc: r8a77970: Remove MMC_{CD,WP}
pinctrl: sh-pfc: r8a7795-es1: Add TPU pins, groups and functions
pinctrl: sh-pfc: r8a7795: Add TPU pins, groups and functions
pinctrl: sh-pfc: r8a7796: Add TPU pins, groups and functions
pinctrl: sh-pfc: r8a77965: Add TPU pins, groups and functions
pinctrl: sh-pfc: Add PORT_GP_27 helper macro
pinctrl: sh-pfc: r8a7778: Use common PORT_GP_CFG_27() macro
pinctrl: sh-pfc: Add new non-GPIO helper macros
pinctrl: sh-pfc: emev2: Use new macros for non-GPIO pins
pinctrl: sh-pfc: r8a7778: Use new macros for non-GPIO pins
pinctrl: sh-pfc: r8a7790: Use new macros for non-GPIO pins
pinctrl: sh-pfc: r8a7795-es1: Use new macros for non-GPIO pins
pinctrl: sh-pfc: r8a7795: Use new macros for non-GPIO pins
pinctrl: sh-pfc: r8a7796: Use new macros for non-GPIO pins
pinctrl: sh-pfc: r8a77965: Use new macros for non-GPIO pins
pinctrl: sh-pfc: r8a77990: Use new macros for non-GPIO pins
pinctrl: sh-pfc: sh73a0: Use new macros for non-GPIO pins
pinctrl: sh-pfc: Remove obsolete SH_PFC_PIN_NAMED*() macros
dt-bindings: pinctrl: pic32: Spelling s/configuraion/configuration/
Guillaume La Roque (6):
dt-bindings: pinctrl: add a 'drive-strength-microamp' property
pinctrl: generic: add new 'drive-strength-microamp' property support
dt-bindings: pinctrl: meson: Add drive-strength-microamp property
pinctrl: meson: Rework enable/disable bias part
pinctrl: meson: add support of drive-strength-microamp
pinctrl: meson: g12a: add DS bank value
Gustavo A. R. Silva (1):
pinctrl: tb10x: Use flexible-array member and struct_size() helper
Hongwei Zhang (1):
pinctrl: aspeed: Add SGPM pinmux
Icenowy Zheng (2):
dt-bindings: pinctrl: add missing compatible string for V3s
dt-bindings: pinctrl: add compatible string for Allwinner V3 pinctrl
Jerome Brunet (2):
dt-bindings: pinctrl: meson: add output support in pinconf
pinctrl: meson: add output support in pinconf
Krishna Yarlagadda (3):
pinctrl: Add Tegra194 pinctrl DT bindings
pinctrl: tegra: Support 32 bit register access
pinctrl: tegra: Add Tegra194 pinmux driver
Lee Jones (2):
pinctrl: msm: Add ability for drivers to supply a reserved GPIO list
pinctrl: qcom: sdm845: Provide ACPI support
Linus Walleij (8):
pinctrl: core: Do not add device links for hogs
pinctrl: stm32: Add links to consumers
pinctrl: u300: Fix SPDX tags
pinctrl: nomadik: Fix SPDX tags
Merge tag 'sh-pfc-for-v5.3-tag1' of
git://git.kernel.org/.../geert/renesas-drivers into devel
Merge branch 'ib-qcom-acpi' into devel
pinctrl: Minimize SPDX hamming distance
pinctrl: aspeed: Fix missed include
Manivannan Sadhasivam (6):
dt-bindings: pinctrl: Modify pinctrl memory map
pinctrl: Rework the pinmux handling for BM1880 SoC
dt-bindings: pinctrl: Document pinconf bindings for BM1880 SoC
pinctrl: Add pinconf support for BM1880 SoC
dt-bindings: pinctrl: Document drive strength settings for BM1880 SoC
pinctrl: Add drive strength support for BM1880 SoC
Masahiro Yamada (5):
pinctrl: add include guard to pinctrl-state.h
pinctrl: remove unneeded initializer for list_for_each_entry() iterator
pinctrl: remove unused pin_is_valid()
pinctrl: make pinconf.h self-contained
pinctrl: remove unneeded #ifdef around declarations
Nathan Chancellor (1):
pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
Neil Armstrong (5):
pinctrl: meson: update with SPDX Licence identifier
dt-bindings: gpio: meson-gxbb-gpio: update with SPDX Licence identifier
dt-bindings: gpio: meson-gxl-gpio: update with SPDX Licence identifier
dt-bindings: gpio: meson8-gpio: update with SPDX Licence identifier
dt-bindings: gpio: meson8b-gpio: update with SPDX Licence identifier
Nicolas Boichat (2):
pinctrl: mediatek: Add pm_ops to pinctrl-paris
pinctrl: mediatek: mt8183: Add pm_ops
Prasad Sodagudi (2):
dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
pinctrl: qcom: Add SM8150 pinctrl driver
Srinivas Ramana (1):
pinctrl: qcom: Add irq_enable callback for msm gpio
Thierry Reding (2):
pinctrl: tegra: Set specific GPIO compatible string
pinctrl: tegra: Add bitmask support for parked bits
Vinod Koul (1):
dt-bindings: pinctrl: qcom: Document missing gpio nodes
Wen Yang (1):
pinctrl: rockchip: fix leaked of_node references
Young Xiao (1):
pinctrl: ns2: Fix potential NULL dereference
YueHaibing (1):
pinctrl: bcm2835: Fix build error without CONFIG_OF
.../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 2 +
.../bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 81 +
.../bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 134 ++
.../bindings/pinctrl/bitmain,bm1880-pinctrl.txt | 34 +-
.../bindings/pinctrl/brcm,bcm2835-gpio.txt | 3 +
.../bindings/pinctrl/fsl,imx8mm-pinctrl.txt | 2 +-
.../bindings/pinctrl/fsl,imx8mn-pinctrl.txt | 39 +
.../bindings/pinctrl/marvell,kirkwood-pinctrl.txt | 44 +-
.../devicetree/bindings/pinctrl/meson,pinctrl.txt | 16 +-
.../bindings/pinctrl/microchip,pic32-pinctrl.txt | 2 +-
.../bindings/pinctrl/nvidia,tegra194-pinmux.txt | 107 ++
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 172 ---
.../bindings/pinctrl/pinctrl-bindings.txt | 3 +
.../bindings/pinctrl/qcom,apq8084-pinctrl.txt | 6 +-
.../bindings/pinctrl/qcom,ipq8074-pinctrl.txt | 6 +-
.../bindings/pinctrl/qcom,mdm9615-pinctrl.txt | 6 +-
.../bindings/pinctrl/qcom,msm8916-pinctrl.txt | 6 +-
.../bindings/pinctrl/qcom,msm8960-pinctrl.txt | 6 +-
.../bindings/pinctrl/qcom,msm8994-pinctrl.txt | 6 +-
.../bindings/pinctrl/qcom,msm8996-pinctrl.txt | 6 +-
.../bindings/pinctrl/qcom,msm8998-pinctrl.txt | 16 +-
.../bindings/pinctrl/qcom,qcs404-pinctrl.txt | 6 +-
.../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 6 +-
.../bindings/pinctrl/qcom,sdm845-pinctrl.txt | 8 +-
.../bindings/pinctrl/qcom,sm8150-pinctrl.txt | 190 +++
.../bindings/pinctrl/st,stm32-pinctrl.txt | 208 ---
.../bindings/pinctrl/st,stm32-pinctrl.yaml | 264 ++++
MAINTAINERS | 9 +
arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h | 646 ++++++++
drivers/pinctrl/aspeed/Makefile | 2 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 94 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 127 +-
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 246 +---
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 542 +------
drivers/pinctrl/aspeed/pinmux-aspeed.c | 96 ++
drivers/pinctrl/aspeed/pinmux-aspeed.h | 735 ++++++++++
drivers/pinctrl/bcm/Kconfig | 6 +-
drivers/pinctrl/bcm/pinctrl-ns2-mux.c | 2 +
drivers/pinctrl/cirrus/pinctrl-cs47l35.c | 6 +-
drivers/pinctrl/cirrus/pinctrl-cs47l85.c | 6 +-
drivers/pinctrl/cirrus/pinctrl-cs47l90.c | 6 +-
drivers/pinctrl/cirrus/pinctrl-madera-core.c | 6 +-
drivers/pinctrl/cirrus/pinctrl-madera.h | 6 +-
drivers/pinctrl/core.c | 44 +-
drivers/pinctrl/freescale/Kconfig | 7 +
drivers/pinctrl/freescale/Makefile | 1 +
drivers/pinctrl/freescale/pinctrl-imx8mn.c | 348 +++++
drivers/pinctrl/intel/pinctrl-baytrail.c | 322 +---
drivers/pinctrl/mediatek/pinctrl-mt8183.c | 1 +
drivers/pinctrl/mediatek/pinctrl-paris.c | 19 +
drivers/pinctrl/mediatek/pinctrl-paris.h | 2 +
drivers/pinctrl/meson/pinctrl-meson-g12a.c | 36 +-
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 8 +-
drivers/pinctrl/meson/pinctrl-meson-gxl.c | 8 +-
drivers/pinctrl/meson/pinctrl-meson.c | 358 +++--
drivers/pinctrl/meson/pinctrl-meson.h | 26 +-
drivers/pinctrl/meson/pinctrl-meson8-pmx.c | 8 +-
drivers/pinctrl/meson/pinctrl-meson8-pmx.h | 8 +-
drivers/pinctrl/meson/pinctrl-meson8.c | 8 +-
drivers/pinctrl/meson/pinctrl-meson8b.c | 8 +-
drivers/pinctrl/mvebu/pinctrl-kirkwood.c | 576 ++++----
drivers/pinctrl/nomadik/Kconfig | 1 +
drivers/pinctrl/nomadik/pinctrl-ab8500.c | 5 +-
drivers/pinctrl/nomadik/pinctrl-ab8505.c | 5 +-
drivers/pinctrl/nomadik/pinctrl-abx500.c | 6 +-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 5 +-
drivers/pinctrl/pinconf-generic.c | 2 +
drivers/pinctrl/pinctrl-bm1880.c | 733 ++++++---
drivers/pinctrl/pinctrl-coh901.c | 2 +-
drivers/pinctrl/pinctrl-rockchip.c | 1 +
drivers/pinctrl/pinctrl-stmfx.c | 1 +
drivers/pinctrl/pinctrl-tb10x.c | 12 +-
drivers/pinctrl/pinctrl-u300.c | 1 +
drivers/pinctrl/qcom/Kconfig | 11 +-
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-msm.c | 43 +-
drivers/pinctrl/qcom/pinctrl-msm.h | 1 +
drivers/pinctrl/qcom/pinctrl-sdm845.c | 46 +-
drivers/pinctrl/qcom/pinctrl-sm8150.c | 1548 ++++++++++++++++++++
drivers/pinctrl/sh-pfc/core.c | 60 +-
drivers/pinctrl/sh-pfc/pfc-emev2.c | 70 +-
drivers/pinctrl/sh-pfc/pfc-r8a73a4.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-r8a77470.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-r8a7778.c | 125 +-
drivers/pinctrl/sh-pfc/pfc-r8a7779.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 36 +-
drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-r8a7792.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-r8a7794.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c | 434 +++---
drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 414 +++---
drivers/pinctrl/sh-pfc/pfc-r8a7796.c | 414 +++---
drivers/pinctrl/sh-pfc/pfc-r8a77965.c | 410 +++---
drivers/pinctrl/sh-pfc/pfc-r8a77970.c | 26 +-
drivers/pinctrl/sh-pfc/pfc-r8a77980.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 181 ++-
drivers/pinctrl/sh-pfc/pfc-r8a77995.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 21 +-
drivers/pinctrl/sh-pfc/pfc-sh7734.c | 2 +-
drivers/pinctrl/sh-pfc/pinctrl.c | 3 +-
drivers/pinctrl/sh-pfc/sh_pfc.h | 90 +-
drivers/pinctrl/stm32/pinctrl-stm32.c | 184 ++-
drivers/pinctrl/stm32/pinctrl-stm32.h | 2 +
drivers/pinctrl/stm32/pinctrl-stm32mp157.c | 5 +
drivers/pinctrl/tegra/Kconfig | 4 +
drivers/pinctrl/tegra/Makefile | 1 +
drivers/pinctrl/tegra/pinctrl-tegra.c | 26 +-
drivers/pinctrl/tegra/pinctrl-tegra.h | 12 +-
drivers/pinctrl/tegra/pinctrl-tegra114.c | 6 +-
drivers/pinctrl/tegra/pinctrl-tegra124.c | 6 +-
drivers/pinctrl/tegra/pinctrl-tegra194.c | 170 +++
drivers/pinctrl/tegra/pinctrl-tegra20.c | 6 +-
drivers/pinctrl/tegra/pinctrl-tegra210.c | 62 +-
drivers/pinctrl/tegra/pinctrl-tegra30.c | 4 +-
include/dt-bindings/gpio/meson-gxbb-gpio.h | 8 +-
include/dt-bindings/gpio/meson-gxl-gpio.h | 8 +-
include/dt-bindings/gpio/meson8-gpio.h | 8 +-
include/dt-bindings/gpio/meson8b-gpio.h | 8 +-
include/linux/gpio.h | 1 +
include/linux/gpio/driver.h | 2 +
include/linux/pinctrl/pinconf-generic.h | 23 +-
include/linux/pinctrl/pinconf.h | 4 +-
include/linux/pinctrl/pinctrl-state.h | 5 +
include/linux/pinctrl/pinctrl.h | 19 +-
include/linux/pinctrl/pinmux.h | 4 -
126 files changed, 7708 insertions(+), 3300 deletions(-)
create mode 100644
Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
create mode 100644
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
create mode 100644
Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.txt
create mode 100644
Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt
delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
create mode 100644
Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt
delete mode 100644
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
create mode 100644
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h
create mode 100644 drivers/pinctrl/aspeed/pinmux-aspeed.c
create mode 100644 drivers/pinctrl/aspeed/pinmux-aspeed.h
create mode 100644 drivers/pinctrl/freescale/pinctrl-imx8mn.c
create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8150.c
create mode 100644 drivers/pinctrl/tegra/pinctrl-tegra194.c
[GIT PULL] Pin control bulk changes for v5.3
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [GIT PULL] Pin control bulk changes for v5.3
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Date: Fri, 12 Jul 2019 11:10:34 +0200
- Follow-Ups:
- Re: [GIT PULL] Pin control bulk changes for v5.3
- From: pr-tracker-bot
- Re: [GIT PULL] Pin control bulk changes for v5.3
- Prev by Date: [PATCH] platform/x86: pcengines-apu2 needs gpiolib
- Next by Date: Re: [PATCH RFC] gpio: Add Virtual Aggregator GPIO Driver
- Previous by thread: [PATCH] platform/x86: pcengines-apu2 needs gpiolib
- Next by thread: Re: [GIT PULL] Pin control bulk changes for v5.3
- Index(es):
 |