Re: [PATCH v1] pinctrl: msm8998: Squash TSIF pins together

[Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx>]

On Wed, Jun 26, 2019 at 8:40 AM Marc Gonzalez <marc.w.gonzalez@xxxxxxx> wrote:
>
> Preamble: Rename tsif1 to tsif0, tsif2 to tsif1.
> Squash tsif0 pins into a single function. Same for tsif1.
>
> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
> ---
>  .../bindings/pinctrl/qcom,msm8998-pinctrl.txt | 19 ++---
>  drivers/pinctrl/qcom/pinctrl-msm8998.c        | 76 +++++--------------
>  2 files changed, 24 insertions(+), 71 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
> index 00174f08ba1d..47b0f30a39e9 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
> @@ -124,9 +124,8 @@ to specify in a pin configuration subnode:
>                     qlink_request, qua_mi2s, sd_card, sd_write, sdc40, sdc41,
>                     sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu,
>                     spkr_i2s, ssbi1, ssc_irq, ter_mi2s, tgu_ch0, tgu_ch1,
> -                   tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en,
> -                   tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en,
> -                   tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
> +                   tsense_pwm1, tsense_pwm2, tsif0, tsif1,
> +                   uim1_clk, uim1_data, uim1_present,
>                     uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
>                     uim_batt, usb_phy, vfr_1, vsense_clkout, vsense_data0,
>                     vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1,
> @@ -179,15 +178,9 @@ Example:
>                 #interrupt-cells = <2>;
>
>                 uart_console_active: uart_console_active {
> -                       mux {
> -                               pins = "gpio4", "gpio5";
> -                               function = "blsp_uart8_a";
> -                       };
> -
> -                       config {
> -                               pins = "gpio4", "gpio5";
> -                               drive-strength = <2>;
> -                               bias-disable;
> -                       };
> +                       pins = "gpio4", "gpio5";
> +                       function = "blsp_uart8_a";
> +                       drive-strength = <2>;
> +                       bias-disable;
>                 };

Whats with these "uart" changes?  Modernizing the example?  Doesn't
seem related to the commit text...