On Sun, Jun 23, 2019 at 12:37:53PM +0800, Icenowy Zheng wrote:
> Introduce the GPIO pins that is only available on V3 (not on V3s) to the
> V3s pinctrl driver.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> ---
> Changes in v3:
> - Fixed code alignment.
> - Fixed LVDS function number.
>
> Changes in v2:
> - Dropped the driver rename patch and apply the changes directly on V3s
> driver.
>
> drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c | 473 +++++++++++++++++-----
> drivers/pinctrl/sunxi/pinctrl-sunxi.h | 2 +
> 2 files changed, 366 insertions(+), 109 deletions(-)
>
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c
> index 6704ce8e5e3d..721c997d472b 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c
> @@ -1,5 +1,5 @@
> /*
> - * Allwinner V3s SoCs pinctrl driver.
> + * Allwinner V3/V3s SoCs pinctrl driver.
> *
> * Copyright (C) 2016 Icenowy Zheng <icenowy@xxxxxxxx>
> *
> @@ -28,235 +28,433 @@ static const struct sunxi_desc_pin sun8i_v3s_pins[] = {
> SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 0),
> SUNXI_FUNCTION(0x0, "gpio_in"),
> SUNXI_FUNCTION(0x1, "gpio_out"),
> - SUNXI_FUNCTION(0x2, "uart2"), /* TX */
> - SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PB_EINT0 */
> + SUNXI_FUNCTION(0x2, "uart2"), /* TX */
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PB_EINT0 */
I'm not sure why all that churn is needed.
Looks good otherwise.
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
