On Tue, Jun 18, 2019 at 11:00:05PM +0300, Dmitry Osipenko wrote:
> 18.06.2019 20:34, Sowjanya Komatineni пишет:
> >
> > On 6/18/19 9:50 AM, Sowjanya Komatineni wrote:
> >>
> >> On 6/18/19 8:41 AM, Stephen Warren wrote:
> >>> On 6/18/19 3:30 AM, Dmitry Osipenko wrote:
> >>>> 18.06.2019 12:22, Dmitry Osipenko пишет:
> >>>>> 18.06.2019 10:46, Sowjanya Komatineni пишет:
> >>>>>> This patch adds suspend and resume support for Tegra pinctrl driver
> >>>>>> and registers them to syscore so the pinmux settings are restored
> >>>>>> before the devices resume.
> >>>>>>
> >>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> >>>>>> ---
> >>>>>> drivers/pinctrl/tegra/pinctrl-tegra.c | 62 ++++++++++++++++++++++++++++++++
> >>>>>> drivers/pinctrl/tegra/pinctrl-tegra.h | 5 +++
> >>>>>> drivers/pinctrl/tegra/pinctrl-tegra114.c | 1 +
> >>>>>> drivers/pinctrl/tegra/pinctrl-tegra124.c | 1 +
> >>>>>> drivers/pinctrl/tegra/pinctrl-tegra20.c | 1 +
> >>>>>> drivers/pinctrl/tegra/pinctrl-tegra210.c | 13 +++++++
> >>>>>> drivers/pinctrl/tegra/pinctrl-tegra30.c | 1 +
> >>>>>> 7 files changed, 84 insertions(+)
> >>>>>>
> >>>>>> diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c
> >>>>>> b/drivers/pinctrl/tegra/pinctrl-tegra.c
> >>>>>> index 34596b246578..ceced30d8bd1 100644
> >>>>>> --- a/drivers/pinctrl/tegra/pinctrl-tegra.c
> >>>>>> +++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
> >>>>>> @@ -20,11 +20,16 @@
> >>>>>> #include <linux/pinctrl/pinmux.h>
> >>>>>> #include <linux/pinctrl/pinconf.h>
> >>>>>> #include <linux/slab.h>
> >>>>>> +#include <linux/syscore_ops.h>
> >>>>>> #include "../core.h"
> >>>>>> #include "../pinctrl-utils.h"
> >>>>>> #include "pinctrl-tegra.h"
> >>>>>> +#define EMMC2_PAD_CFGPADCTRL_0 0x1c8
> >>>>>> +#define EMMC4_PAD_CFGPADCTRL_0 0x1e0
> >>>>>> +#define EMMC_DPD_PARKING (0x1fff << 14)
> >>>>>> +
> >>>>>> static inline u32 pmx_readl(struct tegra_pmx *pmx, u32 bank, u32 reg)
> >>>>>> {
> >>>>>> return readl(pmx->regs[bank] + reg);
> >>>>>> @@ -619,6 +624,48 @@ static void tegra_pinctrl_clear_parked_bits(struct tegra_pmx *pmx)
> >>>>>> pmx_writel(pmx, val, g->mux_bank, g->mux_reg);
> >>>>>> }
> >>>>>> }
> >>>>>> +
> >>>>>> + if (pmx->soc->has_park_padcfg) {
> >>>>>> + val = pmx_readl(pmx, 0, EMMC2_PAD_CFGPADCTRL_0);
> >>>>>> + val &= ~EMMC_DPD_PARKING;
> >>>>>> + pmx_writel(pmx, val, 0, EMMC2_PAD_CFGPADCTRL_0);
> >>>>>> +
> >>>>>> + val = pmx_readl(pmx, 0, EMMC4_PAD_CFGPADCTRL_0);
> >>>>>> + val &= ~EMMC_DPD_PARKING;
> >>>>>> + pmx_writel(pmx, val, 0, EMMC4_PAD_CFGPADCTRL_0);
> >>>>>> + }
> >>>>>> +}
> >>>>>
> >>>>> Is there any reason why parked_bit can't be changed to parked_bitmask like I was
> >>>>> asking in a comment to v2?
> >>>>>
> >>>>> I suppose that it's more preferable to keep pinctrl-tegra.c platform-agnostic for
> >>>>> consistency when possible, hence adding platform specifics here should be discouraged.
> >>>>> And then the parked_bitmask will also result in a proper hardware description in the code.
> >>>>>
> >>>>
> >>>> I'm now also vaguely recalling that Stephen Warren had some kind of a "code generator"
> >>>> for the pinctrl drivers. So I guess all those tables were auto-generated initially.
> >>>>
> >>>> Stephen, maybe you could adjust the generator to take into account the bitmask (of
> >>>> course if that's a part of the generated code) and then re-gen it all for Sowjanya?
> >>>
> >>> https://github.com/NVIDIA/tegra-pinmux-scripts holds the scripts that generate
> >>> tegra-pinctrlNNN.c. See soc-to-kernel-pinctrl-driver.py. IIRC, tegra-pinctrl.c (the core
> >>> file) isn't auto-generated. Sowjanya is welcome to send a patch to that repo if the code
> >>> needs to be updated.
> >>
> >>
> >> Hi Dmitry,
> >>
> >> Just want to be clear on my understanding of your request.
> >>
> >> "change parked_bit to parked_bitmask" are you requested to change parked_bit of PINGROUP
> >> and DRV_PINGROUP to use bitmask value rather than bit position inorder to have parked bit
> >> configuration for EMMC PADs as well to happen by masking rather than checking for
> >> existence of parked_bit?
> >>
> >> Trying to understand the reason/benefit for changing parked_bit to parked_bitmask.
> > Also, Park bits in CFGPAD registers are not common for all CFGPAD registers. Park bits are
> > available only for EMMC and also those bits are used for something else on other CFGPAD
> > registers so bitmask can't be common and this also need an update to DRV_PINGROUP macro args
> > just only to handle EMMC parked_bitmask. So not sure of the benefit in using bitmask rather
>
> Hi Sowjanya,
>
> The main motivation is to describe hardware properly in the drivers. Why to make a
> hacky-looking workaround while you can make things properly? Especially if that doesn't take
> much effort.
>
> Stephen, thank you very much for the pointer to the script. Looks like it should be easy to
> modify the script accordingly to the required change.
>
> Sowjanya, below is a draft of the change that I'm suggesting. I see this as two separate
> patches: first converts drivers to use parked_bitmask, second adds suspend-resume support.
>
> Please note that in the end it's up to you and Tegra/PINCTRL maintainers to decide if this
> is a worthwhile change that I'm suggesting. In my opinion it is much better to have a
> generic solution rather than to have a special quirk solely for T210.
>
> diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c
> index 34596b246578..4150da74bd44 100644
> --- a/drivers/pinctrl/tegra/pinctrl-tegra.c
> +++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
> @@ -613,9 +613,9 @@ static void tegra_pinctrl_clear_parked_bits(struct tegra_pmx *pmx)
>
> for (i = 0; i < pmx->soc->ngroups; ++i) {
> g = &pmx->soc->groups[i];
> - if (g->parked_bit >= 0) {
> + if (g->parked_bitmask != -1) {
> val = pmx_readl(pmx, g->mux_bank, g->mux_reg);
> - val &= ~(1 << g->parked_bit);
> + val &= ~g->parked_bitmask;
> pmx_writel(pmx, val, g->mux_bank, g->mux_reg);
> }
> }
> diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.h b/drivers/pinctrl/tegra/pinctrl-tegra.h
> index 287702660783..875eb7a1d838 100644
> --- a/drivers/pinctrl/tegra/pinctrl-tegra.h
> +++ b/drivers/pinctrl/tegra/pinctrl-tegra.h
> @@ -96,7 +96,7 @@ struct tegra_function {
> * @tri_reg: Tri-state register offset.
> * @tri_bank: Tri-state register bank.
> * @tri_bit: Tri-state register bit.
> - * @parked_bit: Parked register bit. -1 if unsupported.
> + * @parked_bitmask: Parked register bitmask. -1 if unsupported.
If we're already moving to a bitmask, wouldn't it be easier to just make
0 the case where it is unsupported?
> * @einput_bit: Enable-input register bit.
> * @odrain_bit: Open-drain register bit.
> * @lock_bit: Lock register bit.
> @@ -146,7 +146,7 @@ struct tegra_pingroup {
> s32 mux_bit:6;
> s32 pupd_bit:6;
> s32 tri_bit:6;
> - s32 parked_bit:6;
> + s32 parked_bitmask:26;
If we make parked_bitmask == 0 the case for "unsupported" we could make
this u32 while at it.
> s32 einput_bit:6;
> s32 odrain_bit:6;
> s32 lock_bit:6;
> diff --git a/drivers/pinctrl/tegra/pinctrl-tegra210.c b/drivers/pinctrl/tegra/pinctrl-tegra210.c
> index 0b56ad5c9c1c..d2ba13466e06 100644
> --- a/drivers/pinctrl/tegra/pinctrl-tegra210.c
> +++ b/drivers/pinctrl/tegra/pinctrl-tegra210.c
> @@ -1302,7 +1302,7 @@ static struct tegra_function tegra210_functions[] = {
> .lock_bit = 7, \
> .ioreset_bit = -1, \
> .rcv_sel_bit = PINGROUP_BIT_##e_io_hv(10), \
> - .parked_bit = 5, \
> + .parked_bitmask = BIT(5), \
> .hsm_bit = PINGROUP_BIT_##hsm(9), \
> .schmitt_bit = 12, \
> .drvtype_bit = PINGROUP_BIT_##drvtype(13), \
> @@ -1320,7 +1320,7 @@ static struct tegra_function tegra210_functions[] = {
> }
>
> #define DRV_PINGROUP(pg_name, r, drvdn_b, drvdn_w, drvup_b, drvup_w, \
> - slwr_b, slwr_w, slwf_b, slwf_w) \
> + slwr_b, slwr_w, slwf_b, slwf_w, prk_mask) \
> { \
> .name = "drive_" #pg_name, \
> .pins = drive_##pg_name##_pins, \
> @@ -1335,7 +1335,7 @@ static struct tegra_function tegra210_functions[] = {
> .rcv_sel_bit = -1, \
> .drv_reg = DRV_PINGROUP_REG(r), \
> .drv_bank = 0, \
> - .parked_bit = -1, \
> + .parked_bitmask = prk_mask, \
> .hsm_bit = -1, \
> .schmitt_bit = -1, \
> .lpmd_bit = -1, \
> @@ -1516,31 +1516,31 @@ static const struct tegra_pingroup tegra210_groups[] = {
> PINGROUP(pz5, SOC, RSVD1, RSVD2, RSVD3, 0x3290, N, N, N,
> -1, -1, -1, -1, -1, -1, -1, -1, -1),
>
> /* pg_name, r, drvdn_b, drvdn_w, drvup_b, drvup_w, slwr_b, slwr_w, slwf_b, slwf_w */
> - DRV_PINGROUP(pa6, 0x9c0, 12, 5, 20, 5, -1, -1, -1, -1),
> - DRV_PINGROUP(pcc7, 0x9c4, 12, 5, 20, 5, -1, -1, -1, -1),
> - DRV_PINGROUP(pe6, 0x9c8, 12, 5, 20, 5, -1, -1, -1, -1),
> - DRV_PINGROUP(pe7, 0x9cc, 12, 5, 20, 5, -1, -1, -1, -1),
> - DRV_PINGROUP(ph6, 0x9d0, 12, 5, 20, 5, -1, -1, -1, -1),
> - DRV_PINGROUP(pk0, 0x9d4, -1, -1, -1, -1, 28, 2, 30, 2),
> - DRV_PINGROUP(pk1, 0x9d8, -1, -1, -1, -1, 28, 2, 30, 2),
> - DRV_PINGROUP(pk2, 0x9dc, -1, -1, -1, -1, 28, 2, 30, 2),
> - DRV_PINGROUP(pk3, 0x9e0, -1, -1, -1, -1, 28, 2, 30, 2),
> - DRV_PINGROUP(pk4, 0x9e4, -1, -1, -1, -1, 28, 2, 30, 2),
> - DRV_PINGROUP(pk5, 0x9e8, -1, -1, -1, -1, 28, 2, 30, 2),
> - DRV_PINGROUP(pk6, 0x9ec, -1, -1, -1, -1, 28, 2, 30, 2),
> - DRV_PINGROUP(pk7, 0x9f0, -1, -1, -1, -1, 28, 2, 30, 2),
> - DRV_PINGROUP(pl0, 0x9f4, -1, -1, -1, -1, 28, 2, 30, 2),
> - DRV_PINGROUP(pl1, 0x9f8, -1, -1, -1, -1, 28, 2, 30, 2),
> - DRV_PINGROUP(pz0, 0x9fc, 12, 7, 20, 7, -1, -1, -1, -1),
> - DRV_PINGROUP(pz1, 0xa00, 12, 7, 20, 7, -1, -1, -1, -1),
> - DRV_PINGROUP(pz2, 0xa04, 12, 7, 20, 7, -1, -1, -1, -1),
> - DRV_PINGROUP(pz3, 0xa08, 12, 7, 20, 7, -1, -1, -1, -1),
> - DRV_PINGROUP(pz4, 0xa0c, 12, 7, 20, 7, -1, -1, -1, -1),
> - DRV_PINGROUP(pz5, 0xa10, 12, 7, 20, 7, -1, -1, -1, -1),
> - DRV_PINGROUP(sdmmc1, 0xa98, 12, 7, 20, 7, 28, 2, 30, 2),
> - DRV_PINGROUP(sdmmc2, 0xa9c, 2, 6, 8, 6, 28, 2, 30, 2),
> - DRV_PINGROUP(sdmmc3, 0xab0, 12, 7, 20, 7, 28, 2, 30, 2),
> - DRV_PINGROUP(sdmmc4, 0xab4, 2, 6, 8, 6, 28, 2, 30, 2),
> + DRV_PINGROUP(pa6, 0x9c0, 12, 5, 20, 5, -1, -1, -1, -1, -1),
> + DRV_PINGROUP(pcc7, 0x9c4, 12, 5, 20, 5, -1, -1, -1, -1, -1),
> + DRV_PINGROUP(pe6, 0x9c8, 12, 5, 20, 5, -1, -1, -1, -1, -1),
> + DRV_PINGROUP(pe7, 0x9cc, 12, 5, 20, 5, -1, -1, -1, -1, -1),
> + DRV_PINGROUP(ph6, 0x9d0, 12, 5, 20, 5, -1, -1, -1, -1, -1),
> + DRV_PINGROUP(pk0, 0x9d4, -1, -1, -1, -1, 28, 2, 30, 2, -1),
> + DRV_PINGROUP(pk1, 0x9d8, -1, -1, -1, -1, 28, 2, 30, 2, -1),
> + DRV_PINGROUP(pk2, 0x9dc, -1, -1, -1, -1, 28, 2, 30, 2, -1),
> + DRV_PINGROUP(pk3, 0x9e0, -1, -1, -1, -1, 28, 2, 30, 2, -1),
> + DRV_PINGROUP(pk4, 0x9e4, -1, -1, -1, -1, 28, 2, 30, 2, -1),
> + DRV_PINGROUP(pk5, 0x9e8, -1, -1, -1, -1, 28, 2, 30, 2, -1),
> + DRV_PINGROUP(pk6, 0x9ec, -1, -1, -1, -1, 28, 2, 30, 2, -1),
> + DRV_PINGROUP(pk7, 0x9f0, -1, -1, -1, -1, 28, 2, 30, 2, -1),
> + DRV_PINGROUP(pl0, 0x9f4, -1, -1, -1, -1, 28, 2, 30, 2, -1),
> + DRV_PINGROUP(pl1, 0x9f8, -1, -1, -1, -1, 28, 2, 30, 2, -1),
> + DRV_PINGROUP(pz0, 0x9fc, 12, 7, 20, 7, -1, -1, -1, -1, -1),
> + DRV_PINGROUP(pz1, 0xa00, 12, 7, 20, 7, -1, -1, -1, -1, -1),
> + DRV_PINGROUP(pz2, 0xa04, 12, 7, 20, 7, -1, -1, -1, -1, -1),
> + DRV_PINGROUP(pz3, 0xa08, 12, 7, 20, 7, -1, -1, -1, -1, -1),
> + DRV_PINGROUP(pz4, 0xa0c, 12, 7, 20, 7, -1, -1, -1, -1, -1),
> + DRV_PINGROUP(pz5, 0xa10, 12, 7, 20, 7, -1, -1, -1, -1, -1),
> + DRV_PINGROUP(sdmmc1, 0xa98, 12, 7, 20, 7, 28, 2, 30, 2, -1),
> + DRV_PINGROUP(sdmmc2, 0xa9c, 2, 6, 8, 6, 28, 2, 30, 2, 0x7ffc000),
> + DRV_PINGROUP(sdmmc3, 0xab0, 12, 7, 20, 7, 28, 2, 30, 2, -1),
> + DRV_PINGROUP(sdmmc4, 0xab4, 2, 6, 8, 6, 28, 2, 30, 2, 0x7ffc000),
Might be worth adding a new DRV_PINGROUP_PARK (or whatever) macro that
takes the additional parameter. that way we could avoid the extra churn.
Thierry
> };
>
> static const struct tegra_pinctrl_soc_data tegra210_pinctrl = {
Attachment:
signature.asc
Description: PGP signature
