Add drive strength support for Bitmain BM1880 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
drivers/pinctrl/pinctrl-bm1880.c | 290 ++++++++++++++++++++++++++++++-
1 file changed, 287 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-bm1880.c b/drivers/pinctrl/pinctrl-bm1880.c
index 1aaed46d5c30..63b130cb1ffb 100644
--- a/drivers/pinctrl/pinctrl-bm1880.c
+++ b/drivers/pinctrl/pinctrl-bm1880.c
@@ -4,8 +4,6 @@
*
* Copyright (c) 2019 Linaro Ltd.
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- *
- * TODO: Drive strength support
*/
#include <linux/io.h>
@@ -29,6 +27,7 @@
* @ngroups: Number of @groups
* @funcs: Pinmux functions
* @nfuncs: Number of @funcs
+ * @pconf: Pinconf data
*/
struct bm1880_pinctrl {
void __iomem *base;
@@ -37,6 +36,7 @@ struct bm1880_pinctrl {
unsigned int ngroups;
const struct bm1880_pinmux_function *funcs;
unsigned int nfuncs;
+ const struct bm1880_pinconf_data *pinconf;
};
/**
@@ -69,6 +69,14 @@ struct bm1880_pinmux_function {
u8 mux_shift;
};
+/**
+ * struct bm1880_pinconf_data - pinconf data
+ * @drv_bits: Drive strength bit width
+ */
+struct bm1880_pinconf_data {
+ u32 drv_bits;
+};
+
static const struct pinctrl_pin_desc bm1880_pins[] = {
PINCTRL_PIN(0, "MIO0"),
PINCTRL_PIN(1, "MIO1"),
@@ -785,6 +793,126 @@ static const struct bm1880_pinmux_function bm1880_pmux_functions[] = {
BM1880_PINMUX_FUNCTION(spi0, 1),
};
+#define BM1880_PINCONF_DAT(_width) \
+ { \
+ .drv_bits = _width, \
+ }
+
+static const struct bm1880_pinconf_data bm1880_pinconf[] = {
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x03),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+ BM1880_PINCONF_DAT(0x02),
+};
+
static int bm1880_pctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
struct bm1880_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
@@ -878,9 +1006,145 @@ static int bm1880_pinmux_set_mux(struct pinctrl_dev *pctldev,
#define BM1880_PINCONF_PULLCTRL(pin) BM1880_PINCONF(pin, 0)
#define BM1880_PINCONF_PULLUP(pin) BM1880_PINCONF(pin, 1)
#define BM1880_PINCONF_PULLDOWN(pin) BM1880_PINCONF(pin, 2)
+#define BM1880_PINCONF_DRV(pin) BM1880_PINCONF(pin, 6)
#define BM1880_PINCONF_SCHMITT(pin) BM1880_PINCONF(pin, 9)
#define BM1880_PINCONF_SLEW(pin) BM1880_PINCONF(pin, 10)
+static int bm1880_pinconf_drv_set(unsigned int mA, u32 width,
+ u32 *regval, u32 bit_offset)
+{
+ u32 _regval;
+
+ _regval = *regval;
+
+ /*
+ * There are two sets of drive strength bit width exposed by the
+ * SoC at 4mA step, hence we need to handle them separately.
+ */
+ if (width == 0x03) {
+ switch (mA) {
+ case 4:
+ _regval &= ~(width << bit_offset);
+ _regval |= (0 << bit_offset);
+ break;
+ case 8:
+ _regval &= ~(width << bit_offset);
+ _regval |= (1 << bit_offset);
+ break;
+ case 12:
+ _regval &= ~(width << bit_offset);
+ _regval |= (2 << bit_offset);
+ break;
+ case 16:
+ _regval &= ~(width << bit_offset);
+ _regval |= (3 << bit_offset);
+ break;
+ case 20:
+ _regval &= ~(width << bit_offset);
+ _regval |= (4 << bit_offset);
+ break;
+ case 24:
+ _regval &= ~(width << bit_offset);
+ _regval |= (5 << bit_offset);
+ break;
+ case 28:
+ _regval &= ~(width << bit_offset);
+ _regval |= (6 << bit_offset);
+ break;
+ case 32:
+ _regval &= ~(width << bit_offset);
+ _regval |= (7 << bit_offset);
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ switch (mA) {
+ case 4:
+ _regval &= ~(width << bit_offset);
+ _regval |= (0 << bit_offset);
+ break;
+ case 8:
+ _regval &= ~(width << bit_offset);
+ _regval |= (1 << bit_offset);
+ break;
+ case 12:
+ _regval &= ~(width << bit_offset);
+ _regval |= (2 << bit_offset);
+ break;
+ case 16:
+ _regval &= ~(width << bit_offset);
+ _regval |= (3 << bit_offset);
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ *regval = _regval;
+
+ return 0;
+}
+
+static int bm1880_pinconf_drv_get(u32 width, u32 drv)
+{
+ int ret = -ENOTSUPP;
+
+ /*
+ * There are two sets of drive strength bit width exposed by the
+ * SoC at 4mA step, hence we need to handle them separately.
+ */
+ if (width == 0x03) {
+ switch (drv) {
+ case 0:
+ ret = 4;
+ break;
+ case 1:
+ ret = 8;
+ break;
+ case 2:
+ ret = 12;
+ break;
+ case 3:
+ ret = 16;
+ break;
+ case 4:
+ ret = 20;
+ break;
+ case 5:
+ ret = 24;
+ break;
+ case 6:
+ ret = 28;
+ break;
+ case 7:
+ ret = 32;
+ break;
+ default:
+ break;
+ }
+ } else {
+ switch (drv) {
+ case 0:
+ ret = 4;
+ break;
+ case 1:
+ ret = 8;
+ break;
+ case 2:
+ ret = 12;
+ break;
+ case 3:
+ ret = 16;
+ break;
+ default:
+ break;
+ }
+ }
+
+ return ret;
+}
+
static int bm1880_pinconf_cfg_get(struct pinctrl_dev *pctldev,
unsigned int pin,
unsigned long *config)
@@ -889,6 +1153,7 @@ static int bm1880_pinconf_cfg_get(struct pinctrl_dev *pctldev,
unsigned int param = pinconf_to_config_param(*config);
unsigned int arg = 0;
u32 regval, offset, bit_offset;
+ int ret;
offset = (pin >> 1) << 2;
regval = readl_relaxed(pctrl->base + BM1880_REG_MUX + offset);
@@ -914,6 +1179,15 @@ static int bm1880_pinconf_cfg_get(struct pinctrl_dev *pctldev,
bit_offset = BM1880_PINCONF_SLEW(pin);
arg = !!(regval & BIT(bit_offset));
break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ bit_offset = BM1880_PINCONF_DRV(pin);
+ ret = bm1880_pinconf_drv_get(pctrl->pinconf[pin].drv_bits,
+ !!(regval & BIT(bit_offset)));
+ if (ret < 0)
+ return ret;
+
+ arg = ret;
+ break;
default:
return -ENOTSUPP;
}
@@ -930,7 +1204,7 @@ static int bm1880_pinconf_cfg_set(struct pinctrl_dev *pctldev,
{
struct bm1880_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
u32 regval, offset, bit_offset;
- int i;
+ int i, ret;
offset = (pin >> 1) << 2;
regval = readl_relaxed(pctrl->base + BM1880_REG_MUX + offset);
@@ -966,6 +1240,15 @@ static int bm1880_pinconf_cfg_set(struct pinctrl_dev *pctldev,
else
regval &= ~BIT(bit_offset);
break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ bit_offset = BM1880_PINCONF_DRV(pin);
+ ret = bm1880_pinconf_drv_set(arg,
+ pctrl->pinconf[pin].drv_bits,
+ ®val, bit_offset);
+ if (ret < 0)
+ return ret;
+
+ break;
default:
dev_warn(pctldev->dev,
"unsupported configuration parameter '%u'\n",
@@ -1041,6 +1324,7 @@ static int bm1880_pinctrl_probe(struct platform_device *pdev)
pctrl->ngroups = ARRAY_SIZE(bm1880_pctrl_groups);
pctrl->funcs = bm1880_pmux_functions;
pctrl->nfuncs = ARRAY_SIZE(bm1880_pmux_functions);
+ pctrl->pinconf = bm1880_pinconf;
pctrl->pctrldev = devm_pinctrl_register(&pdev->dev, &bm1880_desc,
pctrl);
--
2.17.1
[PATCH 2/2] pinctrl: Add drive strength support for BM1880 SoC
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH 2/2] pinctrl: Add drive strength support for BM1880 SoC
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Date: Mon, 3 Jun 2019 13:04:21 +0530
- In-reply-to: <20190603073421.10314-1-manivannan.sadhasivam@linaro.org>
- References: <20190603073421.10314-1-manivannan.sadhasivam@linaro.org>
- Follow-Ups:
- Re: [PATCH 2/2] pinctrl: Add drive strength support for BM1880 SoC
- From: Linus Walleij
- Re: [PATCH 2/2] pinctrl: Add drive strength support for BM1880 SoC
- References:
- [PATCH 1/2] dt-bindings: pinctrl: Document drive strength settings for BM1880 SoC
- From: Manivannan Sadhasivam
- [PATCH 1/2] dt-bindings: pinctrl: Document drive strength settings for BM1880 SoC
- Prev by Date: [PATCH 1/2] dt-bindings: pinctrl: Document drive strength settings for BM1880 SoC
- Next by Date: Re: [PATCH v3 1/2] gpio: Add support for hierarchical IRQ domains
- Previous by thread: [PATCH 1/2] dt-bindings: pinctrl: Document drive strength settings for BM1880 SoC
- Next by thread: Re: [PATCH 2/2] pinctrl: Add drive strength support for BM1880 SoC
- Index(es):
 |