On Mon, Apr 15, 2019 at 01:53:58PM +0800, Chris Chiu wrote: > The touchpad of the ASUS laptops E403NA, X540NA, X541NA are not > responsive after suspend/resume. The following error message > shows after resume. > i2c_hid i2c-ELAN1200:00: failed to reset device. > > On these laptops, the touchpad interrupt is connected via a GPIO > pin which is controlled by Intel pinctrl. After system resumes, > the GPIO is in ACPI mode and no longer works as an IRQ. > > This commit saves the HOSTSW_OWN value during suspend, make sure > the HOSTSW_OWN mode remains the same after resume. > > Signed-off-by: Chris Chiu <chiu@xxxxxxxxxxxx> Acked-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Re: [PATCH v3] pinctrl:intel: Retain HOSTSW_OWN for requested gpio pin
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v3] pinctrl:intel: Retain HOSTSW_OWN for requested gpio pin
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Date: Mon, 15 Apr 2019 22:25:09 +0300
- In-reply-to: <20190415055358.9269-1-chiu@endlessm.com>
- Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
- References: <20190415055358.9269-1-chiu@endlessm.com>
- User-agent: Mutt/1.11.3 (2019-02-01)
- References:
- [PATCH v3] pinctrl:intel: Retain HOSTSW_OWN for requested gpio pin
- From: Chris Chiu
- [PATCH v3] pinctrl:intel: Retain HOSTSW_OWN for requested gpio pin
- Prev by Date: [PATCH 4.19 073/101] genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent()
- Next by Date: [PATCH 4.14 51/69] genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent()
- Previous by thread: [PATCH v3] pinctrl:intel: Retain HOSTSW_OWN for requested gpio pin
- Next by thread: Re: [PATCH v3] pinctrl:intel: Retain HOSTSW_OWN for requested gpio pin
- Index(es):
 |