[PATCH 09/12] pinctrl: sunxi: Prepare for alternative bias voltage setting methods

[megous@xxxxxxxxxx]

From: Ondrej Jirman <megous@xxxxxxxxxx>

H6 has a different I/O voltage bias setting method than A80. Prepare
existing code for using alternative bias voltage setting methods.

Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
---
 drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c |  2 +-
 drivers/pinctrl/sunxi/pinctrl-sunxi.c     | 38 ++++++++++++-----------
 drivers/pinctrl/sunxi/pinctrl-sunxi.h     |  4 ++-
 3 files changed, 24 insertions(+), 20 deletions(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
index da37d594a13d..3aa210079b18 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
@@ -722,7 +722,7 @@ static const struct sunxi_pinctrl_desc sun9i_a80_pinctrl_data = {
 	.npins = ARRAY_SIZE(sun9i_a80_pins),
 	.irq_banks = 5,
 	.disable_strict_mode = true,
-	.has_io_bias_cfg = true,
+	.io_bias_cfg_variant = IO_BIAS_CFG_V1,
 };
 
 static int sun9i_a80_pinctrl_probe(struct platform_device *pdev)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 8dd25caea2cf..9f329fec77cf 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -610,7 +610,7 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
 	u32 val, reg;
 	int uV;
 
-	if (!pctl->desc->has_io_bias_cfg)
+	if (!pctl->desc->io_bias_cfg_variant)
 		return 0;
 
 	uV = regulator_get_voltage(supply);
@@ -621,23 +621,25 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
 	if (uV == 0)
 		return 0;
 
-	/* Configured value must be equal or greater to actual voltage */
-	if (uV <= 1800000)
-		val = 0x0; /* 1.8V */
-	else if (uV <= 2500000)
-		val = 0x6; /* 2.5V */
-	else if (uV <= 2800000)
-		val = 0x9; /* 2.8V */
-	else if (uV <= 3000000)
-		val = 0xA; /* 3.0V */
-	else
-		val = 0xD; /* 3.3V */
-
-	pin -= pctl->desc->pin_base;
-
-	reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
-	reg &= ~IO_BIAS_MASK;
-	writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
+	if (pctl->desc->io_bias_cfg_variant == IO_BIAS_CFG_V1) {
+		/* Configured value must be equal or greater to actual voltage */
+		if (uV <= 1800000)
+			val = 0x0; /* 1.8V */
+		else if (uV <= 2500000)
+			val = 0x6; /* 2.5V */
+		else if (uV <= 2800000)
+			val = 0x9; /* 2.8V */
+		else if (uV <= 3000000)
+			val = 0xA; /* 3.0V */
+		else
+			val = 0xD; /* 3.3V */
+
+		pin -= pctl->desc->pin_base;
+
+		reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
+		reg &= ~IO_BIAS_MASK;
+		writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
+	}
 
 	return 0;
 }
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
index ee15ab067b5f..476772f91dba 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
@@ -95,6 +95,8 @@
 #define PINCTRL_SUN7I_A20	BIT(7)
 #define PINCTRL_SUN8I_R40	BIT(8)
 
+#define IO_BIAS_CFG_V1		1
+
 struct sunxi_desc_function {
 	unsigned long	variant;
 	const char	*name;
@@ -117,7 +119,7 @@ struct sunxi_pinctrl_desc {
 	const unsigned int		*irq_bank_map;
 	bool				irq_read_needs_mux;
 	bool				disable_strict_mode;
-	bool				has_io_bias_cfg;
+	int				io_bias_cfg_variant;
 };
 
 struct sunxi_pinctrl_function {
-- 
2.21.0