Re: [PATCH] gpio: pca953x: Add wake-up support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



wt., 12 lut 2019 o 15:17 Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
napisał(a):
>
> Implement the irq_set_wake() method in the (optional) irq_chip of the
> GPIO expander, and propagate wake-up settings to the upstream interrupt
> controller.  This allows GPIOs connected to a PCA953X GPIO expander to
> serve as wake-up sources.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> Tested with a PCA9654 and gpio-keys on an R-Car Ebisu-4D board.
> ---
>  drivers/gpio/gpio-pca953x.c | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>
> diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
> index de52f63863dbe59b..8dfb8e326b9d12ca 100644
> --- a/drivers/gpio/gpio-pca953x.c
> +++ b/drivers/gpio/gpio-pca953x.c
> @@ -151,6 +151,7 @@ struct pca953x_chip {
>         u8 irq_trig_raise[MAX_BANK];
>         u8 irq_trig_fall[MAX_BANK];
>         struct irq_chip irq_chip;
> +       unsigned int irq_parent;
>  #endif
>
>         struct i2c_client *client;
> @@ -513,6 +514,24 @@ static void pca953x_irq_unmask(struct irq_data *d)
>         chip->irq_mask[d->hwirq / BANK_SZ] |= 1 << (d->hwirq % BANK_SZ);
>  }
>
> +static int pca953x_irq_set_wake(struct irq_data *d, unsigned int on)
> +{
> +       struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> +       struct pca953x_chip *chip = gpiochip_get_data(gc);
> +       int error = 0;
> +
> +       if (chip->irq_parent) {
> +               error = irq_set_irq_wake(chip->irq_parent, on);
> +               if (error) {
> +                       dev_dbg(&chip->client->dev,
> +                               "irq %u doesn't support irq_set_wake\n",
> +                               chip->irq_parent);
> +                       chip->irq_parent = 0;
> +               }
> +       }
> +       return error;
> +}
> +
>  static void pca953x_irq_bus_lock(struct irq_data *d)
>  {
>         struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> @@ -732,6 +751,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
>         irq_chip->name = dev_name(&chip->client->dev);
>         irq_chip->irq_mask = pca953x_irq_mask;
>         irq_chip->irq_unmask = pca953x_irq_unmask;
> +       irq_chip->irq_set_wake = pca953x_irq_set_wake;

Is it possible to assign this callback conditionally depending on
client->irq and avoid the if (chip->irq_parent) in
pca953x_irq_set_wake()?

Bart

>         irq_chip->irq_bus_lock = pca953x_irq_bus_lock;
>         irq_chip->irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock;
>         irq_chip->irq_set_type = pca953x_irq_set_type;
> @@ -747,6 +767,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
>         }
>
>         gpiochip_set_nested_irqchip(&chip->gpio_chip, irq_chip, client->irq);
> +       chip->irq_parent = client->irq;
>
>         return 0;
>  }
> --
> 2.17.1
>




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux