Re: [PATCH 2/2] x86: pcengines apuv2 gpio/leds/keys platform driver

["Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>]

On 08.02.19 15:30, Linus Walleij wrote:

Hi,

> Instead of hardcoding the GPIO base and offsets like this, use:
> 
> #include <linux/gpio/machine.h>
> 
> and define a descriptor table using the name of your gpiochip.
> There should be examples of other board quirks doing this.
> I have already patched gpio-leds.c to accept LEDs from
> descriptor tables, see commit
> commit 45d4c6de4e497e5b0026c77044ae5fcddf8fecd8
> "leds: gpio: Try to lookup gpiod from device"

Still trying to understand how that actually works ...

I'm now defining the leds pdata and gpio mapping this way:

static const struct gpio_led apu2_leds[] = {
    { .name = "apu:green:1" },
    { .name = "apu:green:2" },
    { .name = "apu:green:3" }
};

struct gpiod_lookup_table gpios_led_table[] = {
    .dev_id = "leds-gpio.0",
    .table = {
        GPIO_LOOKUP_IDX("gpio.0", 0, "led", 0, GPIO_ACTIVE_LOW),
        GPIO_LOOKUP_IDX("gpio.0", 1, "led", 1, GPIO_ACTIVE_LOW),
        GPIO_LOOKUP_IDX("gpio.0", 2, "led", 2, GPIO_ACTIVE_LOW),
    }
};

But unsure now to determine the correct names for dev_id (the
leds-gpio instance ?) and the gpio chip. In the example, these
seem to be autogenerated - how can I retrieve them from my
actual devices ?

By the way: does that also work with gpio-keys-polled ?


--mtx

-- 
Enrico Weigelt, metux IT consult
Free software and Linux embedded engineering
info@xxxxxxxxx -- +49-151-27565287