Quoting Brian Masney (2019-01-09 17:12:58) > Add interrupt controller properties now that spmi-gpio is a proper > hierarchical IRQ chip. The interrupts property is no longer needed so > remove it. > > This change was not tested on any hardware but the same change was > tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with > no issues. > > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> > --- Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Re: [PATCH v3 6/6] ARM: dts: qcom: pma8084: add interrupt controller properties
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v3 6/6] ARM: dts: qcom: pma8084: add interrupt controller properties
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Date: Fri, 11 Jan 2019 13:57:03 -0800
- In-reply-to: <20190110011258.17227-7-masneyb@onstation.org>
- References: <20190110011258.17227-1-masneyb@onstation.org> <20190110011258.17227-7-masneyb@onstation.org>
- User-agent: alot/0.8
- References:
- [PATCH v3 0/6] qcom: spmi: add support for hierarchical IRQ chip
- From: Brian Masney
- [PATCH v3 6/6] ARM: dts: qcom: pma8084: add interrupt controller properties
- From: Brian Masney
- [PATCH v3 0/6] qcom: spmi: add support for hierarchical IRQ chip
- Prev by Date: Re: [PATCH v3 1/2] pinctrl: meson: meson8b: add the eth_rxd2 and eth_rxd3 pins
- Next by Date: Re: [PATCH v3 5/6] ARM: dts: qcom: pm8941: add interrupt controller properties
- Previous by thread: [PATCH v3 6/6] ARM: dts: qcom: pma8084: add interrupt controller properties
- Next by thread: [PATCH v3 5/6] ARM: dts: qcom: pm8941: add interrupt controller properties
- Index(es):
 |