Re: [PATCH 3/4] gpio: add core support for pull-up/pull-down configuration

[Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>]

Hello Jan,

Thanks for your feedback.

On Tue, 08 Jan 2019 15:00:22 +0100, Jan Kundrát wrote:
> > diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
> > index 7f1260c78270..6518dc8c7c4c 100644
> > --- a/drivers/gpio/gpiolib-of.c
> > +++ b/drivers/gpio/gpiolib-of.c
> > @@ -323,6 +323,11 @@ struct gpio_desc *of_find_gpio(struct 
> > device *dev, const char *con_id,
> >  	if (of_flags & OF_GPIO_TRANSITORY)
> >  		*flags |= GPIO_TRANSITORY;
> >  
> > +	if (of_flags & OF_GPIO_PULL_UP)
> > +		*flags |= GPIO_PULL_UP;
> > +	else if (of_flags & OF_GPIO_PULL_DOWN)
> > +		*flags |= GPIO_PULL_DOWN;
> > +
> >  	return desc;
> >  }
> >    
> 
> Hi Thomas,
> my recommendation is to add an explicit "error handling" code here to warn 
> when the DT specifies both pull-up and pull-down bits. It's outside of any 
> hot path, and it will help identify mistakes instead of silently prefering 
> a random bit choice.

Sure.

> > +/* Bit 4 express pull up */
> > +#define GPIO_PULL_UP 16
> > +
> > +/* Bit 5 express pull down */
> > +#define GPIO_PULL_DOWN 32
> > +  
> 
> > +	GPIO_PULL_UP = (1 << 4),
> > +	GPIO_PULL_DOWN = (1 << 5),  
> 
> > +	OF_GPIO_PULL_UP = 0x10,
> > +	OF_GPIO_PULL_DOWN = 0x20,  
> 
> I understand that it's already there, but I wonder if this duplication can 
> be removed. Am I missing something, perhaps a reason why 
> include/linux/of_gpio.h and include/dt-bindings/gpio/gpio.h are separate 
> files?

I also wondered why there was such duplication when writing the
patches. I've assumed it was done so that
include/dt-bindings/gpio/gpio.h is "clean" enough to be included in DT,
while include/linux/of_gpio.h some more elaborate definitions. But
indeed <linux/of_gpio.h> could include <dt-bindings/gpio/gpio.h>.
Perhaps there's a good reason for this duplication? Let's see the
feedback of GPIO maintainers about this.

Best regards,

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com