Re: [PATCH 2/2] gpio: pca953x: add support for pcal6416 type

[Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>]

czw., 3 sty 2019 o 17:13 Thomas Petazzoni
<thomas.petazzoni@xxxxxxxxxxx> napisał(a):
>
> The NXP PCAL6416, documented at [1], is a variant of the PCA GPIO
> expander with 16 GPIOs, and supporting an interrupt and the "extended"
> features for interrupt, pull-up/pull-down configuration, etc.
>
> [1] https://www.nxp.com/docs/en/data-sheet/PCAL6416A.pdf
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
> ---
>  drivers/gpio/gpio-pca953x.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
> index 83617fdc661d..82d69ab51976 100644
> --- a/drivers/gpio/gpio-pca953x.c
> +++ b/drivers/gpio/gpio-pca953x.c
> @@ -88,6 +88,7 @@ static const struct i2c_device_id pca953x_id[] = {
>         { "pca9575", 16 | PCA957X_TYPE | PCA_INT, },
>         { "pca9698", 40 | PCA953X_TYPE, },
>
> +       { "pcal6416", 16 | PCA953X_TYPE | PCA_INT | PCA_PCAL, },
>         { "pcal6524", 24 | PCA953X_TYPE | PCA_INT | PCA_PCAL, },
>         { "pcal9555a", 16 | PCA953X_TYPE | PCA_INT | PCA_PCAL, },
>
> --
> 2.20.1
>

Queued for v5.1, thanks!

Bartosz