On Sun, 2018-12-23 at 02:50 +0800, Sean Wang wrote: > On Mon, Dec 17, 2018 at 6:32 PM <chuanjia.liu@xxxxxxxxxxxx> wrote: > > > > I thought the subject still is much general, it should be further > improved with something like "add EINT support to virtual GPIOs" and > should say more about what virtual GPIOs means by MTKers in the patch > description because "virtual" is a usual term used throughout the > kernel and that would easily cause others to fail to interpret > correctly. > Thank you for your advice,I will modify subject and description. > > From: Chuanjia Liu <Chuanjia.Liu@xxxxxxxxxxxx> > > > > This patch avoid return err when virtual gpio set SMT. > > > > Signed-off-by: Chuanjia Liu <Chuanjia.Liu@xxxxxxxxxxxx> > > --- > > change note: > > v2 : 1. delete virtual gpio number > > 2. add judgment conditions > > --- > > drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 6 +++++- > > 1 file changed, 5 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c > > index 4a9e0d4c2bbc..a576e417744a 100644 > > --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c > > +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c > > @@ -290,7 +290,11 @@ static int mtk_xt_set_gpio_as_eint(void *data, unsigned long eint_n) > > return err; > > > > err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT, MTK_ENABLE); > > - if (err) > > + > > + /* SMT doesn't support virtual GPIO, add err != -ENOTSUPP is used for > > + * avoid return err when virtual gpio set SMT. > > + */ > > I'd prefer to the comments as the below > > /* > SMT is supposed to be supported by every real GPIO and doesn't support > virtual GPIOs, so the extra condition err != -ENOTSUPP is just for > adding EINT support to these virtual GPIOs. It should add an extra > flag in the pin descriptor when more pins with distinctive > characteristic come out. > */ > Thank you for your advice,I will modify comments. > > + if (err && err != -ENOTSUPP) > > return err; > > > > return 0; > > -- > > 2.19.1 > >