Add level active IRQ support to regmap-irq irqchip. Change breaks existing regmap-irq type setting. Convert the existing drivers which use regmap-irq with trigger type setting (gpio-max77620) to work with this new approach. So we do not magically support level-active IRQs on gpio-max77620 - but add support to the regmap-irq for chips which support them =) We do not support distinguishing situation where HW supports rising and falling edge detection but not both. Separating this would require inventing yet another flags for IRQ types. Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx> --- Version 3 of this patch is intended to be functionally identical to v2. This patch is rebased on top of a tree which contains changes: "regmap: irq: handle HW using separate rising/falling edge interrupts" from Bartosz Golaszewski and the change "regmap: regmap-irq: Remove default irq type setting from core" (proposed here): https://lore.kernel.org/lkml/20181218105813.GA6957@localhost.localdomain/ There should not be direct dependency to "regmap: regmap-irq: Remove default irq type setting from core" though. Patch was also tested to apply cleany on regmap-tree. Same statement regarding testing applies - gpio-max77620 are only tested to compile. All real testing would be _HIGHLY_ appreciated. drivers/base/regmap/regmap-irq.c | 35 ++++++++++----- drivers/gpio/gpio-max77620.c | 96 ++++++++++++++++++++++++++-------------- include/linux/regmap.h | 27 ++++++++--- 3 files changed, 110 insertions(+), 48 deletions(-) diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c index 8b216b2e2c19..31d23c9a5ae7 100644 --- a/drivers/base/regmap/regmap-irq.c +++ b/drivers/base/regmap/regmap-irq.c @@ -199,7 +199,7 @@ static void regmap_irq_enable(struct irq_data *data) const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq); unsigned int mask, type; - type = irq_data->type_falling_mask | irq_data->type_rising_mask; + type = irq_data->type.type_falling_val | irq_data->type.type_rising_val; /* * The type_in_mask flag means that the underlying hardware uses @@ -234,27 +234,42 @@ static int regmap_irq_set_type(struct irq_data *data, unsigned int type) struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); struct regmap *map = d->map; const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq); - int reg = irq_data->type_reg_offset / map->reg_stride; + int reg; + const struct regmap_irq_type *t = &irq_data->type; - if (!(irq_data->type_rising_mask | irq_data->type_falling_mask)) - return 0; + if ((t->types_supported & type) != type) + return -ENOTSUPP; + + reg = t->type_reg_offset / map->reg_stride; - d->type_buf[reg] &= ~(irq_data->type_falling_mask | - irq_data->type_rising_mask); + if (t->type_reg_mask) + d->type_buf[reg] &= ~t->type_reg_mask; + else + d->type_buf[reg] &= ~(t->type_falling_val | + t->type_rising_val | + t->type_level_low_val | + t->type_level_high_val); switch (type) { case IRQ_TYPE_EDGE_FALLING: - d->type_buf[reg] |= irq_data->type_falling_mask; + d->type_buf[reg] |= t->type_falling_val; break; case IRQ_TYPE_EDGE_RISING: - d->type_buf[reg] |= irq_data->type_rising_mask; + d->type_buf[reg] |= t->type_rising_val; break; case IRQ_TYPE_EDGE_BOTH: - d->type_buf[reg] |= (irq_data->type_falling_mask | - irq_data->type_rising_mask); + d->type_buf[reg] |= (t->type_falling_val | + t->type_rising_val); break; + case IRQ_TYPE_LEVEL_HIGH: + d->type_buf[reg] |= t->type_level_high_val; + break; + + case IRQ_TYPE_LEVEL_LOW: + d->type_buf[reg] |= t->type_level_low_val; + break; default: return -EINVAL; } diff --git a/drivers/gpio/gpio-max77620.c b/drivers/gpio/gpio-max77620.c index 538bce4b5b42..65fa3a198ebd 100644 --- a/drivers/gpio/gpio-max77620.c +++ b/drivers/gpio/gpio-max77620.c @@ -25,60 +25,92 @@ struct max77620_gpio { static const struct regmap_irq max77620_gpio_irqs[] = { [0] = { - .mask = MAX77620_IRQ_LVL2_GPIO_EDGE0, - .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, - .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, .reg_offset = 0, - .type_reg_offset = 0, + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE0, + .type = { + .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING, + .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK, + .type_reg_offset = 0, + .types_supported = IRQ_TYPE_EDGE_BOTH, + }, }, [1] = { - .mask = MAX77620_IRQ_LVL2_GPIO_EDGE1, - .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, - .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, .reg_offset = 0, - .type_reg_offset = 1, + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE1, + .type = { + .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING, + .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK, + .type_reg_offset = 1, + .types_supported = IRQ_TYPE_EDGE_BOTH, + }, }, [2] = { - .mask = MAX77620_IRQ_LVL2_GPIO_EDGE2, - .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, - .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, .reg_offset = 0, - .type_reg_offset = 2, + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE2, + .type = { + .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING, + .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK, + .type_reg_offset = 2, + .types_supported = IRQ_TYPE_EDGE_BOTH, + }, }, [3] = { - .mask = MAX77620_IRQ_LVL2_GPIO_EDGE3, - .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, - .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, .reg_offset = 0, - .type_reg_offset = 3, + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE3, + .type = { + .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING, + .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK, + .type_reg_offset = 3, + .types_supported = IRQ_TYPE_EDGE_BOTH, + }, }, [4] = { - .mask = MAX77620_IRQ_LVL2_GPIO_EDGE4, - .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, - .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, .reg_offset = 0, - .type_reg_offset = 4, + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE4, + .type = { + .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING, + .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK, + .type_reg_offset = 4, + .types_supported = IRQ_TYPE_EDGE_BOTH, + }, }, [5] = { - .mask = MAX77620_IRQ_LVL2_GPIO_EDGE5, - .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, - .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, .reg_offset = 0, - .type_reg_offset = 5, + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE5, + .type = { + .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING, + .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK, + .type_reg_offset = 5, + .types_supported = IRQ_TYPE_EDGE_BOTH, + }, }, [6] = { - .mask = MAX77620_IRQ_LVL2_GPIO_EDGE6, - .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, - .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, .reg_offset = 0, - .type_reg_offset = 6, + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE6, + .type = { + .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING, + .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK, + .type_reg_offset = 6, + .types_supported = IRQ_TYPE_EDGE_BOTH, + }, }, [7] = { - .mask = MAX77620_IRQ_LVL2_GPIO_EDGE7, - .type_rising_mask = MAX77620_CNFG_GPIO_INT_RISING, - .type_falling_mask = MAX77620_CNFG_GPIO_INT_FALLING, .reg_offset = 0, - .type_reg_offset = 7, + .mask = MAX77620_IRQ_LVL2_GPIO_EDGE7, + .type = { + .type_rising_val = MAX77620_CNFG_GPIO_INT_RISING, + .type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING, + .type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK, + .type_reg_offset = 7, + .types_supported = IRQ_TYPE_EDGE_BOTH, + }, }, }; diff --git a/include/linux/regmap.h b/include/linux/regmap.h index b7aa50cfb306..a904f87151e8 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -1089,22 +1089,37 @@ int regmap_fields_read(struct regmap_field *field, unsigned int id, int regmap_fields_update_bits_base(struct regmap_field *field, unsigned int id, unsigned int mask, unsigned int val, bool *change, bool async, bool force); +/** + * struct regmap_irq_type - IRQ type definitions. + * + * @type_reg_offset: Offset register for the irq type setting. + * @type_rising_val: Register value to configure RISING type irq. + * @type_falling_val: Register value to configure FALLING type irq. + * @type_level_low_val: Register value to configure LEVEL_LOW type irq. + * @type_level_high_val: Register value to configure LEVEL_HIGH type irq. + * @types_supported: logical OR of IRQ_TYPE_* flags indicating supported types. + */ +struct regmap_irq_type { + unsigned int type_reg_offset; + unsigned int type_reg_mask; + unsigned int type_rising_val; + unsigned int type_falling_val; + unsigned int type_level_low_val; + unsigned int type_level_high_val; + unsigned int types_supported; +}; /** * struct regmap_irq - Description of an IRQ for the generic regmap irq_chip. * * @reg_offset: Offset of the status/mask register within the bank * @mask: Mask used to flag/control the register. - * @type_reg_offset: Offset register for the irq type setting. - * @type_rising_mask: Mask bit to configure RISING type irq. - * @type_falling_mask: Mask bit to configure FALLING type irq. + * @type: IRQ trigger type setting details if supported. */ struct regmap_irq { unsigned int reg_offset; unsigned int mask; - unsigned int type_reg_offset; - unsigned int type_rising_mask; - unsigned int type_falling_mask; + struct regmap_irq_type type; }; #define REGMAP_IRQ_REG(_irq, _off, _mask) \ -- 2.14.3 -- Matti Vaittinen ROHM Semiconductors ~~~ "I don't think so," said Rene Descartes. Just then, he vanished ~~~