Replace the ad-hoc reg_direction direction register caching with generic regcache cache. This reduces code duplication. Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> Cc: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> --- V2: Fix the IRQ handling code as well --- drivers/gpio/gpio-pca953x.c | 55 +++++++++++++++++++++---------------- 1 file changed, 31 insertions(+), 24 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 3b845b16031e..08fd7c17fcb6 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -142,7 +142,6 @@ static const struct pca953x_reg_config pca957x_regs = { struct pca953x_chip { unsigned gpio_start; u8 reg_output[MAX_BANK]; - u8 reg_direction[MAX_BANK]; struct mutex i2c_lock; struct regmap *regmap; @@ -387,18 +386,13 @@ static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8 *val) static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off) { struct pca953x_chip *chip = gpiochip_get_data(gc); - u8 reg_val; + u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off, + true, false); + u8 bit = BIT(off % BANK_SZ); int ret; mutex_lock(&chip->i2c_lock); - reg_val = chip->reg_direction[off / BANK_SZ] | (1u << (off % BANK_SZ)); - - ret = pca953x_write_single(chip, chip->regs->direction, reg_val, off); - if (ret) - goto exit; - - chip->reg_direction[off / BANK_SZ] = reg_val; -exit: + ret = regmap_write_bits(chip->regmap, dirreg, bit, bit); mutex_unlock(&chip->i2c_lock); return ret; } @@ -407,6 +401,9 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc, unsigned off, int val) { struct pca953x_chip *chip = gpiochip_get_data(gc); + u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off, + true, false); + u8 bit = BIT(off % BANK_SZ); u8 reg_val; int ret; @@ -426,12 +423,7 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc, chip->reg_output[off / BANK_SZ] = reg_val; /* then direction */ - reg_val = chip->reg_direction[off / BANK_SZ] & ~(1u << (off % BANK_SZ)); - ret = pca953x_write_single(chip, chip->regs->direction, reg_val, off); - if (ret) - goto exit; - - chip->reg_direction[off / BANK_SZ] = reg_val; + ret = regmap_write_bits(chip->regmap, dirreg, bit, 0); exit: mutex_unlock(&chip->i2c_lock); return ret; @@ -483,16 +475,19 @@ static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val) static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off) { struct pca953x_chip *chip = gpiochip_get_data(gc); + u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off, + true, false); + u8 bit = BIT(off % BANK_SZ); u32 reg_val; int ret; mutex_lock(&chip->i2c_lock); - ret = pca953x_read_single(chip, chip->regs->direction, ®_val, off); + ret = regmap_read(chip->regmap, dirreg, ®_val); mutex_unlock(&chip->i2c_lock); if (ret < 0) return ret; - return !!(reg_val & (1u << (off % BANK_SZ))); + return !!(reg_val & bit); } static void pca953x_gpio_set_multiple(struct gpio_chip *gc, @@ -580,6 +575,10 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d) u8 new_irqs; int level, i; u8 invert_irq_mask[MAX_BANK]; + int reg_direction[MAX_BANK]; + + regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction, + NBANK(chip)); if (chip->driver_data & PCA_PCAL) { /* Enable latch on interrupt-enabled inputs */ @@ -595,7 +594,7 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d) /* Look for any newly setup interrupt */ for (i = 0; i < NBANK(chip); i++) { new_irqs = chip->irq_trig_fall[i] | chip->irq_trig_raise[i]; - new_irqs &= ~chip->reg_direction[i]; + new_irqs &= reg_direction[i]; while (new_irqs) { level = __ffs(new_irqs); @@ -660,6 +659,7 @@ static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending) bool pending_seen = false; bool trigger_seen = false; u8 trigger[MAX_BANK]; + int reg_direction[MAX_BANK]; int ret, i; if (chip->driver_data & PCA_PCAL) { @@ -690,8 +690,10 @@ static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending) return false; /* Remove output pins from the equation */ + regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction, + NBANK(chip)); for (i = 0; i < NBANK(chip); i++) - cur_stat[i] &= chip->reg_direction[i]; + cur_stat[i] &= reg_direction[i]; memcpy(old_stat, chip->irq_stat, NBANK(chip)); @@ -745,6 +747,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, int irq_base) { struct i2c_client *client = chip->client; + int reg_direction[MAX_BANK]; int ret, i; if (client->irq && irq_base != -1 @@ -759,8 +762,10 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, * interrupt. We have to rely on the previous read for * this purpose. */ + regmap_bulk_read(chip->regmap, chip->regs->direction, + reg_direction, NBANK(chip)); for (i = 0; i < NBANK(chip); i++) - chip->irq_stat[i] &= chip->reg_direction[i]; + chip->irq_stat[i] &= reg_direction[i]; mutex_init(&chip->irq_lock); ret = devm_request_threaded_irq(&client->dev, @@ -817,9 +822,9 @@ static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert) if (ret) goto out; - ret = pca953x_read_regs(chip, chip->regs->direction, - chip->reg_direction); - if (ret) + ret = regcache_sync_region(chip->regmap, chip->regs->direction, + chip->regs->direction + NBANK(chip)); + if (ret != 0) goto out; /* set platform specific polarity inversion */ @@ -937,6 +942,8 @@ static int pca953x_probe(struct i2c_client *client, goto err_exit; } + regcache_mark_dirty(chip->regmap); + mutex_init(&chip->i2c_lock); /* * In case we have an i2c-mux controlled by a GPIO provided by an -- 2.18.0