Add the BOOT and CARD pins as GROUP_GROUPs as well so they can be configured in devicetree using groups = BOOTx or groups = CARDx. This makes the behavior consistent with other pins inside the same driver as well as with the BOOT and CARD pins of the GXBB and GXL pinctrl drivers. Fixes: 0fefcb6876d0d6 ("pinctrl: Add support for Meson8b") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- drivers/pinctrl/meson/pinctrl-meson8b.c | 28 +++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c index b455e0c7a282..c69ca95b1ad5 100644 --- a/drivers/pinctrl/meson/pinctrl-meson8b.c +++ b/drivers/pinctrl/meson/pinctrl-meson8b.c @@ -403,6 +403,34 @@ static struct meson_pmx_group meson8b_cbus_groups[] = { GPIO_GROUP(GPIOH_8), GPIO_GROUP(GPIOH_9), + GPIO_GROUP(CARD_0), + GPIO_GROUP(CARD_1), + GPIO_GROUP(CARD_2), + GPIO_GROUP(CARD_3), + GPIO_GROUP(CARD_4), + GPIO_GROUP(CARD_5), + GPIO_GROUP(CARD_6), + + GPIO_GROUP(BOOT_0), + GPIO_GROUP(BOOT_1), + GPIO_GROUP(BOOT_2), + GPIO_GROUP(BOOT_3), + GPIO_GROUP(BOOT_4), + GPIO_GROUP(BOOT_5), + GPIO_GROUP(BOOT_6), + GPIO_GROUP(BOOT_7), + GPIO_GROUP(BOOT_8), + GPIO_GROUP(BOOT_9), + GPIO_GROUP(BOOT_10), + GPIO_GROUP(BOOT_11), + GPIO_GROUP(BOOT_12), + GPIO_GROUP(BOOT_13), + GPIO_GROUP(BOOT_14), + GPIO_GROUP(BOOT_15), + GPIO_GROUP(BOOT_16), + GPIO_GROUP(BOOT_17), + GPIO_GROUP(BOOT_18), + GPIO_GROUP(DIF_0_P), GPIO_GROUP(DIF_0_N), GPIO_GROUP(DIF_1_P), -- 2.19.2