Re: [PATCH v10 0/9] Add the I3C subsystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 15, 2018 at 4:58 AM Boris Brezillon
<boris.brezillon@xxxxxxxxxxx> wrote:
> +Mark Brown for the question about /dev/spidev
> On Thu, 15 Nov 2018 12:14:37 +0000
> vitor <vitor.soares@xxxxxxxxxxxx> wrote:
> > My initial thoughts are to do the same think as for i2c, expose the
> > buses or the i3c_devices and use ioctl for private transfers.
>
> Exposing the bus is dangerous IMO, because an I3C bus is not like an
> I2C bus:
>
>    * I3C device needs to be discovered through DAA
>    * I2C devices need to be declared ahead of time, and LVR is used to
>      determine the limitations on the bus at runtime
>
> So you'd anyway be able to interact only with devices that have
> previously been discovered.
>
> Note that the virtual I2C bus is already exposed, but any command
> targeting an address that is not attached to a registered I2C dev will
> get a -ENOENT error.
>
> What we could do though, is expose I3C devices that do not have a
> driver in kernel space, like spidev does.
>
> > Some
> > direct CCC commands can be sent through the /sys as you plan for SETNEWDA .
>
> Yes, CCC commands that need to be exposed to userspace should be
> exposed through sysfs, or, if we decide to create a /dev/i3cX device
> per bus, through ioctls.
>
> >
> > What do you think about this?
>
> I think this request is perfectly valid, we just need to decide how it
> should be done, and before we take this decision, I'd like to get
> inputs from other maintainers.
>
> Mark, Wolfram, Arnd, Greg, any opinion?

I think for a new user space interface, it makes sense to explore a number of
different options before making the final decision.

I agree about better not exposing the bus as a /dev/i3c* node, and that we
probably do need to expose individual devices in some form to allow
writing complete user space drivers that can do everything a kernel driver
can do.

Can you describe what a low-level interface to the device looks like
in the kernel? Can this be abstracted as simply pread()/pwrite() plus
an interrupt mechanism, or do we need a set of ioctl() operations as
well?

If it can be purely based on a regmap abstraction, a sysfs inteface
might be sufficient, though that has some downsides with permission
management compared to a /dev/* node.

Another option might be the use of a socket interface, which also
has some issues in terms of permission management, but might
be a good fit if we could abstract bus transactions as packets that
can be queued.

       Arnd



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux