Re: [PATCH 2/2] dt-bindings: pinctrl: update bindings for MT7629 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 5, 2018 at 12:43 AM Ryder Lee <ryder.lee@xxxxxxxxxxxx> wrote:
>
> This updates bindings for MT7629 pinctrl driver.
>
> Cc: Sean Wang <sean.wang@xxxxxxxxxx>
> Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/pinctrl/pinctrl-mt7622.txt | 128 +++++++++++++++++++++
>  1 file changed, 128 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
> index 3b69513..4dedce4 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
> @@ -3,6 +3,7 @@
>  Required properties for the root node:
>   - compatible: Should be one of the following
>                "mediatek,mt7622-pinctrl" for MT7622 SoC
> +              "mediatek,mt7629-pinctrl" for MT7629 SoC
>   - reg: offset and length of the pinctrl space
>
>   - gpio-controller: Marks the device node as a GPIO controller.
> @@ -324,6 +325,133 @@ group.
>         "uart4_2_rts_cts"               "uart"          95, 96
>         "watchdog"                      "watchdog"      78
>
> +
> +== Valid values for pins, function and groups on MT7629 ==
> +
> +       Pin #:  Valid values for pins
> +       -----------------------------
> +       PIN 0: "TOP_5G_CLK"
> +       PIN 1: "TOP_5G_DATA"
> +       PIN 2: "WF0_5G_HB0"
> +       PIN 3: "WF0_5G_HB1"
> +       PIN 4: "WF0_5G_HB2"
> +       PIN 5: "WF0_5G_HB3"
> +       PIN 6: "WF0_5G_HB4"
> +       PIN 7: "WF0_5G_HB5"
> +       PIN 8: "WF0_5G_HB6"
> +       PIN 9: "XO_REQ"
> +       PIN 10: "TOP_RST_N"
> +       PIN 11: "SYS_WATCHDOG"
> +       PIN 12: "EPHY_LED0_N_JTDO"
> +       PIN 13: "EPHY_LED1_N_JTDI"
> +       PIN 14: "EPHY_LED2_N_JTMS"
> +       PIN 15: "EPHY_LED3_N_JTCLK"
> +       PIN 16: "EPHY_LED4_N_JTRST_N"
> +       PIN 17: "WF2G_LED_N"
> +       PIN 18: "WF5G_LED_N"
> +       PIN 19: "I2C_SDA"
> +       PIN 20: "I2C_SCL"
> +       PIN 21: "GPIO_9"
> +       PIN 22: "GPIO_10"
> +       PIN 23: "GPIO_11"
> +       PIN 24: "GPIO_12"
> +       PIN 25: "UART1_TXD"
> +       PIN 26: "UART1_RXD"
> +       PIN 27: "UART1_CTS"
> +       PIN 28: "UART1_RTS"
> +       PIN 29: "UART2_TXD"
> +       PIN 30: "UART2_RXD"
> +       PIN 31: "UART2_CTS"
> +       PIN 32: "UART2_RTS"
> +       PIN 33: "MDI_TP_P1"
> +       PIN 34: "MDI_TN_P1"
> +       PIN 35: "MDI_RP_P1"
> +       PIN 36: "MDI_RN_P1"
> +       PIN 37: "MDI_RP_P2"
> +       PIN 38: "MDI_RN_P2"
> +       PIN 39: "MDI_TP_P2"
> +       PIN 40: "MDI_TN_P2"
> +       PIN 41: "MDI_TP_P3"
> +       PIN 42: "MDI_TN_P3"
> +       PIN 43: "MDI_RP_P3"
> +       PIN 44: "MDI_RN_P3"
> +       PIN 45: "MDI_RP_P4"
> +       PIN 46: "MDI_RN_P4"
> +       PIN 47: "MDI_TP_P4"
> +       PIN 48: "MDI_TN_P4"
> +       PIN 49: "SMI_MDC"
> +       PIN 50: "SMI_MDIO"
> +       PIN 51: "PCIE_PERESET_N"
> +       PIN 52: "PWM_0"
> +       PIN 53: "GPIO_0"
> +       PIN 54: "GPIO_1"
> +       PIN 55: "GPIO_2"
> +       PIN 56: "GPIO_3"
> +       PIN 57: "GPIO_4"
> +       PIN 58: "GPIO_5"
> +       PIN 59: "GPIO_6"
> +       PIN 60: "GPIO_7"
> +       PIN 61: "GPIO_8"
> +       PIN 62: "SPI_CLK"
> +       PIN 63: "SPI_CS"
> +       PIN 64: "SPI_MOSI"
> +       PIN 65: "SPI_MISO"
> +       PIN 66: "SPI_WP"
> +       PIN 67: "SPI_HOLD"
> +       PIN 68: "UART0_TXD"
> +       PIN 69: "UART0_RXD"
> +       PIN 70: "TOP_2G_CLK"
> +       PIN 71: "TOP_2G_DATA"
> +       PIN 72: "WF0_2G_HB0"
> +       PIN 73: "WF0_2G_HB1"
> +       PIN 74: "WF0_2G_HB2"
> +       PIN 75: "WF0_2G_HB3"
> +       PIN 76: "WF0_2G_HB4"
> +       PIN 77: "WF0_2G_HB5"
> +       PIN 78: "WF0_2G_HB6"
> +
> +Valid values for function are:
> +       "eth", "i2c", "led", "flash", "pcie", "pwm", "spi", "uart", "watchdog"

Should we add "ext" as the function and its related groups explaining
in the below?

It seems a missing line happens here, that is
Valid values for groups are:
> +
> +       Valid value                     function        pins (in pin#)
> +       -------------------------------------------------------------------------
> +       "wf0_2g"                        "eth"           70, 71, 72, 73, 74, 75,
> +                                                       76, 77, 78
> +       "wf0_5g"                        "eth"           0, 1, 2, 3, 4, 5, 6, 7
> +                                                       8, 9, 10
> +       "mdc_mdio"                      "eth"           23, 24
> +       "i2c_0"                         "i2c"           19, 20
> +       "i2c_1"                         "i2c"           53, 54
> +       "ephy_leds"                     "led"           12, 13, 14, 15, 16, 17, 18
> +       "ephy0_led"                     "led"           12
> +       "ephy1_led"                     "led"           13
> +       "ephy2_led"                     "led"           14
> +       "ephy3_led"                     "led"           15
> +       "ephy4_led"                     "led"           16
> +       "wf2g_led"                      "led"           17
> +       "wf5g_led"                      "led"           18
> +       "snfi"                          "flash"         62, 63, 64, 65, 66, 67
> +       "spi_nor"                       "flash"         62, 63, 64, 65, 66, 67
> +       "pcie_pereset"                  "pcie"          51
> +       "pcie_wake"                     "pcie"          55
> +       "pcie_clkreq"                   "pcie"          56
> +       "pwm_0"                         "pwm"           52
> +       "pwm_1"                         "pwm"           61
> +       "spi_0"                         "spi"           21, 22, 23, 24
> +       "spi_1"                         "spi"           62, 63, 64, 65
> +       "spi_wp"                        "spi"           66
> +       "spi_hold"                      "spi"           67
> +       "uart0_txd_rxd"                 "uart"          68, 69
> +       "uart1_0_txd_rxd"               "uart"          25, 26
> +       "uart1_0_cts_rts"               "uart"          27, 28
> +       "uart1_1_txd_rxd"               "uart"          53, 54
> +       "uart1_1_cts_rts"               "uart"          55, 56
> +       "uart2_0_txd_rxd"               "uart"          29, 30
> +       "uart2_0_cts_rts"               "uart"          31, 32
> +       "uart2_1_txd_rxd"               "uart"          57, 58
> +       "uart2_1_cts_rts"               "uart"          59, 60
> +       "watchdog"                      "watchdog"      11
> +
>  Example:
>
>         pio: pinctrl@10211000 {
> --
> 1.9.1
>



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux