Hi,
On Tue, Nov 06, 2018 at 05:44:47PM +0100, Parthiban Nallathambi wrote:
> ping on this patch series!
>
Please send v6 incorporating the comments I provided. You have already
replied to those, so I was expecting another revision!
Thanks,
Mani
> On 9/4/18 9:28 PM, Saravanan Sekar wrote:
> >
> >
> > On 08/29/18 18:34, Manivannan Sadhasivam wrote:
> > > On Wed, Aug 29, 2018 at 10:24:12AM +0200, Saravanan Sekar wrote:
> > > > Add pinctrl driver for Actions Semi S700 SoC. The driver
> > > > supports pinctrl,
> > > > pinmux and pinconf functionalities through a range of registers
> > > > common to
> > > > both gpio driver and pinctrl driver.
> > > >
> > >
> > > Please mention GPIO and interrupt support also.
> > >
> > > > Signed-off-by: Parthiban Nallathambi <pn@xxxxxxx>
> > > > Signed-off-by: Saravanan Sekar <sravanhome@xxxxxxxxx>
> > > > ---
> > > > drivers/pinctrl/actions/Kconfig | 6 +
> > > > drivers/pinctrl/actions/Makefile | 1 +
> > > > drivers/pinctrl/actions/pinctrl-owl.c | 7 +-
> > > > drivers/pinctrl/actions/pinctrl-s700.c | 1925
> > > > ++++++++++++++++++++++++++++++++
> > > > 4 files changed, 1936 insertions(+), 3 deletions(-)
> > > > create mode 100644 drivers/pinctrl/actions/pinctrl-s700.c
> > > >
> > > > diff --git a/drivers/pinctrl/actions/Kconfig
> > > > b/drivers/pinctrl/actions/Kconfig
> > > > index 2397cb0f6011..c7ed1d481802 100644
> > > > --- a/drivers/pinctrl/actions/Kconfig
> > > > +++ b/drivers/pinctrl/actions/Kconfig
> > > > @@ -9,6 +9,12 @@ config PINCTRL_OWL
> > > > help
> > > > Say Y here to enable Actions Semi OWL pinctrl driver
> > > > +config PINCTRL_S700
> > > > + bool "Actions Semi S700 pinctrl driver"
> > > > + depends on PINCTRL_OWL
> > > > + help
> > > > + Say Y here to enable Actions Semi S700 pinctrl driver
> > > > +
> > > > config PINCTRL_S900
> > > > bool "Actions Semi S900 pinctrl driver"
> > > > depends on PINCTRL_OWL
> > > > diff --git a/drivers/pinctrl/actions/Makefile
> > > > b/drivers/pinctrl/actions/Makefile
> > > > index bd232d28400f..86521ed837dd 100644
> > > > --- a/drivers/pinctrl/actions/Makefile
> > > > +++ b/drivers/pinctrl/actions/Makefile
> > > > @@ -1,2 +1,3 @@
> > > > obj-$(CONFIG_PINCTRL_OWL) += pinctrl-owl.o
> > > > +obj-$(CONFIG_PINCTRL_S700) += pinctrl-s700.o
> > > > obj-$(CONFIG_PINCTRL_S900) += pinctrl-s900.o
> > > > diff --git a/drivers/pinctrl/actions/pinctrl-owl.c
> > > > b/drivers/pinctrl/actions/pinctrl-owl.c
> > > > index cc242d6a47c3..5dfe7188a5f8 100644
> > > > --- a/drivers/pinctrl/actions/pinctrl-owl.c
> > > > +++ b/drivers/pinctrl/actions/pinctrl-owl.c
> > > > @@ -739,7 +739,7 @@ static void owl_gpio_irq_mask(struct irq_data *data)
> > > > val = readl_relaxed(gpio_base + port->intc_msk);
> > > > if (val == 0)
> > > > owl_gpio_update_reg(gpio_base + port->intc_ctl,
> > > > - OWL_GPIO_CTLR_ENABLE, false);
> > > > + OWL_GPIO_CTLR_ENABLE +
> > > > port->shared_ctl_offset * 5, false);
> > >
> > > As per my comment in patch 1/5, this needs to be elaborated.
> >
> > One control registers is shared for all the GPIO port, should we specify
> > this in comments?
> >
> > >
> > > > raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> > > > }
> > > > @@ -763,7 +763,8 @@ static void owl_gpio_irq_unmask(struct
> > > > irq_data *data)
> > > > /* enable port interrupt */
> > > > value = readl_relaxed(gpio_base + port->intc_ctl);
> > > > - value |= BIT(OWL_GPIO_CTLR_ENABLE) |
> > > > BIT(OWL_GPIO_CTLR_SAMPLE_CLK_24M);
> > > > + value |= ((BIT(OWL_GPIO_CTLR_ENABLE) |
> > > > BIT(OWL_GPIO_CTLR_SAMPLE_CLK_24M))
> > > > + << port->shared_ctl_offset * 5);
> > > > writel_relaxed(value, gpio_base + port->intc_ctl);
> > > > /* enable GPIO interrupt */
> > > > @@ -801,7 +802,7 @@ static void owl_gpio_irq_ack(struct irq_data *data)
> > > > raw_spin_lock_irqsave(&pctrl->lock, flags);
> > > > owl_gpio_update_reg(gpio_base + port->intc_ctl,
> > > > - OWL_GPIO_CTLR_PENDING, true);
> > > > + OWL_GPIO_CTLR_PENDING + port->shared_ctl_offset
> > > > * 5, true);
> > > > raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> > > > }
> > > > diff --git a/drivers/pinctrl/actions/pinctrl-s700.c
> > > > b/drivers/pinctrl/actions/pinctrl-s700.c
> > > > new file mode 100644
> > > > index 000000000000..df69827803a0
> > > > --- /dev/null
> > > > +++ b/drivers/pinctrl/actions/pinctrl-s700.c
> > > > @@ -0,0 +1,1925 @@
> > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > +/*
> > > > + * OWL S700 Pinctrl driver
> > >
> > > We agreed to use the following naming convention:
> > >
> > > "Actions Semi Owl"
> > >
> > > > + *
> > > > + * Copyright (c) 2014 Actions Semi Inc.
> > > > + * Author: David Liu <liuwei@xxxxxxxxxxxxxxxx>
> > > > + *
> > > > + * Author: Pathiban Nallathambi <pn@xxxxxxx>
> > > > + * Author: Saravanan Sekar <sravanhome@xxxxxxxxx>
> > > > + */
> > > > +
> > > > +#include <linux/module.h>
> > > > +#include <linux/platform_device.h>
> > > > +#include <linux/of.h>
> > >
> > > Please order the headers in alphabetical order.
> > >
> > > > +#include <linux/pinctrl/pinctrl.h>
> > > > +#include <linux/pinctrl/pinconf-generic.h>
> > > > +#include "pinctrl-owl.h"
> > > > +
> > > > +/* Pinctrl registers offset */
> > > > +#define MFCTL0 (0x0040)
> > > > +#define MFCTL1 (0x0044)
> > > > +#define MFCTL2 (0x0048)
> > > > +#define MFCTL3 (0x004C)
> > > > +#define PAD_PULLCTL0 (0x0060)
> > > > +#define PAD_PULLCTL1 (0x0064)
> > > > +#define PAD_PULLCTL2 (0x0068)
> > > > +#define PAD_ST0 (0x006C)
> > > > +#define PAD_ST1 (0x0070)
> > > > +#define PAD_CTL (0x0074)
> > > > +#define PAD_DRV0 (0x0080)
> > > > +#define PAD_DRV1 (0x0084)
> > > > +#define PAD_DRV2 (0x0088)
> > > > +
> > > > +/*
> > > > + * Most pins affected by the pinmux can also be GPIOs. Define
> > > > these first.
> > > > + * These must match how the GPIO driver names/numbers its pins.
> > > > + */
> > > > +#define _GPIOA(offset) (offset)
> > >
> > > Port A seems to be using only the lower 18 bits (14 - 31) according to
> > > the datasheet I have.
> > >
> >
> > As stated in bindings patch, datasheet is incomplete
> >
> > > > +#define _GPIOB(offset) (32 + (offset))
> > > > +#define _GPIOC(offset) (64 + (offset))
> > > > +#define _GPIOD(offset) (96 + (offset))
> > > > +#define _GPIOE(offset) (128 + (offset))
> > > > +
> > > > +/* All non-GPIO pins follow */
> > > > +#define NUM_GPIOS (_GPIOE(7) + 1)
> > > > +#define _PIN(offset) (NUM_GPIOS + (offset))
> > > > +
> > > > +/* Ethernet MAC */
> > > > +#define ETH_TXD0 _GPIOA(14)
> > > > +#define ETH_TXD1 _GPIOA(15)
> > > > +#define ETH_TXD2 _GPIOE(4)
> > > > +#define ETH_TXD3 _GPIOE(5)
> > > > +#define ETH_TXEN _GPIOA(16)
> > > > +#define ETH_RXER _GPIOA(17)
> > > > +#define ETH_CRS_DV _GPIOA(18)
> > > > +#define ETH_RXD1 _GPIOA(19)
> > > > +#define ETH_RXD0 _GPIOA(20)
> > > > +#define ETH_RXD2 _GPIOE(6)
> > > > +#define ETH_RXD3 _GPIOE(7)
> > > > +#define ETH_REF_CLK _GPIOA(21)
> > > > +#define ETH_MDC _GPIOA(22)
> > > > +#define ETH_MDIO _GPIOA(23)
> > > > +
> > > > +/* SIRQ */
> > > > +#define SIRQ0 _GPIOA(24)
> > > > +#define SIRQ1 _GPIOA(25)
> > > > +#define SIRQ2 _GPIOA(26)
> > > > +
> > > > +/* I2S */
> > > > +#define I2S_D0 _GPIOA(27)
> > > > +#define I2S_BCLK0 _GPIOA(28)
> > > > +#define I2S_LRCLK0 _GPIOA(29)
> > > > +#define I2S_MCLK0 _GPIOA(30)
> > > > +#define I2S_D1 _GPIOA(31)
> > > > +#define I2S_BCLK1 _GPIOB(0)
> > > > +#define I2S_LRCLK1 _GPIOB(1)
> > > > +#define I2S_MCLK1 _GPIOB(2)
> > > > +
> > > > +/* PCM1 */
> > > > +#define PCM1_IN _GPIOD(28)
> > > > +#define PCM1_CLK _GPIOD(29)
> > > > +#define PCM1_SYNC _GPIOD(30)
> > > > +#define PCM1_OUT _GPIOD(31)
> > > > +
> > > > +/* KEY */
> > > > +#define KS_IN0 _GPIOB(3)
> > > > +#define KS_IN1 _GPIOB(4)
> > > > +#define KS_IN2 _GPIOB(5)
> > > > +#define KS_IN3 _GPIOB(6)
> > > > +#define KS_OUT0 _GPIOB(7)
> > > > +#define KS_OUT1 _GPIOB(8)
> > > > +#define KS_OUT2 _GPIOB(9)
> > > > +
> > > > +/* LVDS */
> > > > +#define LVDS_OEP _GPIOB(10)
> > > > +#define LVDS_OEN _GPIOB(11)
> > > > +#define LVDS_ODP _GPIOB(12)
> > > > +#define LVDS_ODN _GPIOB(13)
> > > > +#define LVDS_OCP _GPIOB(14)
> > > > +#define LVDS_OCN _GPIOB(15)
> > > > +#define LVDS_OBP _GPIOB(16)
> > > > +#define LVDS_OBN _GPIOB(17)
> > > > +#define LVDS_OAP _GPIOB(18)
> > > > +#define LVDS_OAN _GPIOB(19)
> > > > +#define LVDS_EEP _GPIOB(20)
> > > > +#define LVDS_EEN _GPIOB(21)
> > > > +#define LVDS_EDP _GPIOB(22)
> > > > +#define LVDS_EDN _GPIOB(23)
> > > > +#define LVDS_ECP _GPIOB(24)
> > > > +#define LVDS_ECN _GPIOB(25)
> > > > +#define LVDS_EBP _GPIOB(26)
> > > > +#define LVDS_EBN _GPIOB(27)
> > > > +#define LVDS_EAP _GPIOB(28)
> > > > +#define LVDS_EAN _GPIOB(29)
> > > > +#define LCD0_D18 _GPIOB(30)
> > > > +#define LCD0_D2 _GPIOB(31)
> > > > +
> > > > +/* DSI */
> > > > +#define DSI_DP3 _GPIOC(0)
> > > > +#define DSI_DN3 _GPIOC(1)
> > > > +#define DSI_DP1 _GPIOC(2)
> > > > +#define DSI_DN1 _GPIOC(3)
> > > > +#define DSI_CP _GPIOC(4)
> > > > +#define DSI_CN _GPIOC(5)
> > > > +#define DSI_DP0 _GPIOC(6)
> > > > +#define DSI_DN0 _GPIOC(7)
> > > > +#define DSI_DP2 _GPIOC(8)
> > > > +#define DSI_DN2 _GPIOC(9)
> > > > +
> > > > +/* SD */
> > > > +#define SD0_D0 _GPIOC(10)
> > > > +#define SD0_D1 _GPIOC(11)
> > > > +#define SD0_D2 _GPIOC(12)
> > > > +#define SD0_D3 _GPIOC(13)
> > > > +#define SD0_D4 _GPIOC(14)
> > > > +#define SD0_D5 _GPIOC(15)
> > > > +#define SD0_D6 _GPIOC(16)
> > > > +#define SD0_D7 _GPIOC(17)
> > > > +#define SD0_CMD _GPIOC(18)
> > > > +#define SD0_CLK _GPIOC(19)
> > > > +#define SD1_CMD _GPIOC(20)
> > > > +#define SD1_CLK _GPIOC(21)
> > > > +#define SD1_D0 SD0_D4
> > > > +#define SD1_D1 SD0_D5
> > > > +#define SD1_D2 SD0_D6
> > > > +#define SD1_D3 SD0_D7
> > > > +
> > >
> > > Why SD1_Dx uses SD0 pins?
> >
> > As its just muxing of same pin between SD1 and SD0, reused macro
> >
> > >
> > > > +/* SPI */
> > > > +#define SPI0_SS _GPIOC(23)
> > > > +#define SPI0_MISO _GPIOC(24)
> > > > +
> > > > +/* UART for console */
> > > > +#define UART0_RX _GPIOC(26)
> > > > +#define UART0_TX _GPIOC(27)
> > > > +
> > > > +/* UART for Bluetooth */
> > > > +#define UART2_RX _GPIOD(18)
> > > > +#define UART2_TX _GPIOD(19)
> > > > +#define UART2_RTSB _GPIOD(20)
> > > > +#define UART2_CTSB _GPIOD(21)
> > > > +
> > > > +/* UART for 3G */
> > > > +#define UART3_RX _GPIOD(22)
> > > > +#define UART3_TX _GPIOD(23)
> > > > +#define UART3_RTSB _GPIOD(24)
> > > > +#define UART3_CTSB _GPIOD(25)
> > > > +
> > > > +/* I2C */
> > > > +#define I2C0_SCLK _GPIOC(28)
> > > > +#define I2C0_SDATA _GPIOC(29)
> > > > +#define I2C1_SCLK _GPIOE(0)
> > > > +#define I2C1_SDATA _GPIOE(1)
> > > > +#define I2C2_SCLK _GPIOE(2)
> > > > +#define I2C2_SDATA _GPIOE(3)
> > > > +
> > > > +/* CSI*/
> > > > +#define CSI_DN0 _PIN(0)
> > > > +#define CSI_DP0 _PIN(1)
> > > > +#define CSI_DN1 _PIN(2)
> > > > +#define CSI_DP1 _PIN(3)
> > > > +#define CSI_CN _PIN(4)
> > > > +#define CSI_CP _PIN(5)
> > > > +#define CSI_DN2 _PIN(6)
> > > > +#define CSI_DP2 _PIN(7)
> > > > +#define CSI_DN3 _PIN(8)
> > > > +#define CSI_DP3 _PIN(9)
> > > > +
> > > > +/* Sensor */
> > > > +#define SENSOR0_PCLK _GPIOC(31)
> > > > +#define SENSOR0_CKOUT _GPIOD(10)
> > > > +
> > > > +/* NAND (1.8v / 3.3v) */
> > > > +#define DNAND_D0 _PIN(10)
> > > > +#define DNAND_D1 _PIN(11)
> > > > +#define DNAND_D2 _PIN(12)
> > > > +#define DNAND_D3 _PIN(13)
> > > > +#define DNAND_D4 _PIN(14)
> > > > +#define DNAND_D5 _PIN(15)
> > > > +#define DNAND_D6 _PIN(16)
> > > > +#define DNAND_D7 _PIN(17)
> > > > +#define DNAND_WRB _PIN(18)
> > > > +#define DNAND_RDB _PIN(19)
> > > > +#define DNAND_RDBN _PIN(20)
> > > > +#define DNAND_DQS _GPIOA(12)
> > > > +#define DNAND_DQSN _GPIOA(13)
> > > > +#define DNAND_RB0 _PIN(21)
> > > > +#define DNAND_ALE _GPIOD(12)
> > > > +#define DNAND_CLE _GPIOD(13)
> > > > +#define DNAND_CEB0 _GPIOD(14)
> > > > +#define DNAND_CEB1 _GPIOD(15)
> > > > +#define DNAND_CEB2 _GPIOD(16)
> > > > +#define DNAND_CEB3 _GPIOD(17)
> > > > +
> > > > +/* System */
> > > > +#define PORB _PIN(22)
> > > > +#define CLKO_25M _PIN(23)
> > > > +#define BSEL _PIN(24)
> > > > +#define PKG0 _PIN(25)
> > > > +#define PKG1 _PIN(26)
> > > > +#define PKG2 _PIN(27)
> > > > +#define PKG3 _PIN(28)
> > > > +
> > > > +#define _FIRSTPAD _GPIOA(0)
> > > > +#define _LASTPAD PKG3
> > > > +#define NUM_PADS (_LASTPAD - _FIRSTPAD + 1)
> > >
> > > Why not, #define NUM_PADS (_PIN(28) + 1) ?
> > >
> >
> > Okay
> >
> > > > +
> > > > +/* Pad names for the pinmux subsystem */
> > > > +static const struct pinctrl_pin_desc s700_pads[] = {
> > > > + PINCTRL_PIN(ETH_TXD0, "eth_txd0"),
> > > > + PINCTRL_PIN(ETH_TXD1, "eth_txd1"),
> > > > + PINCTRL_PIN(ETH_TXD2, "eth_txd2"),
> > > > + PINCTRL_PIN(ETH_TXD3, "eth_txd3"),
> > > > + PINCTRL_PIN(ETH_TXEN, "eth_txen"),
> > > > + PINCTRL_PIN(ETH_RXER, "eth_rxer"),
> > > > + PINCTRL_PIN(ETH_CRS_DV, "eth_crs_dv"),
> > > > + PINCTRL_PIN(ETH_RXD1, "eth_rxd1"),
> > > > + PINCTRL_PIN(ETH_RXD0, "eth_rxd0"),
> > > > + PINCTRL_PIN(ETH_RXD2, "eth_rxd2"),
> > > > + PINCTRL_PIN(ETH_RXD3, "eth_rxd3"),
> > > > + PINCTRL_PIN(ETH_REF_CLK, "eth_ref_clk"),
> > > > + PINCTRL_PIN(ETH_MDC, "eth_mdc"),
> > > > + PINCTRL_PIN(ETH_MDIO, "eth_mdio"),
> > > > + PINCTRL_PIN(SIRQ0, "sirq0"),
> > > > + PINCTRL_PIN(SIRQ1, "sirq1"),
> > > > + PINCTRL_PIN(SIRQ2, "sirq2"),
> > > > + PINCTRL_PIN(I2S_D0, "i2s_d0"),
> > > > + PINCTRL_PIN(I2S_BCLK0, "i2s_bclk0"),
> > > > + PINCTRL_PIN(I2S_LRCLK0, "i2s_lrclk0"),
> > > > + PINCTRL_PIN(I2S_MCLK0, "i2s_mclk0"),
> > > > + PINCTRL_PIN(I2S_D1, "i2s_d1"),
> > > > + PINCTRL_PIN(I2S_BCLK1, "i2s_bclk1"),
> > > > + PINCTRL_PIN(I2S_LRCLK1, "i2s_lrclk1"),
> > > > + PINCTRL_PIN(I2S_MCLK1, "i2s_mclk1"),
> > > > + PINCTRL_PIN(PCM1_IN, "pcm1_in"),
> > > > + PINCTRL_PIN(PCM1_CLK, "pcm1_clk"),
> > > > + PINCTRL_PIN(PCM1_SYNC, "pcm1_sync"),
> > > > + PINCTRL_PIN(PCM1_OUT, "pcm1_out"),
> > > > + PINCTRL_PIN(KS_IN0, "ks_in0"),
> > > > + PINCTRL_PIN(KS_IN1, "ks_in1"),
> > > > + PINCTRL_PIN(KS_IN2, "ks_in2"),
> > > > + PINCTRL_PIN(KS_IN3, "ks_in3"),
> > > > + PINCTRL_PIN(KS_OUT0, "ks_out0"),
> > > > + PINCTRL_PIN(KS_OUT1, "ks_out1"),
> > > > + PINCTRL_PIN(KS_OUT2, "ks_out2"),
> > > > + PINCTRL_PIN(LVDS_OEP, "lvds_oep"),
> > > > + PINCTRL_PIN(LVDS_OEN, "lvds_oen"),
> > > > + PINCTRL_PIN(LVDS_ODP, "lvds_odp"),
> > > > + PINCTRL_PIN(LVDS_ODN, "lvds_odn"),
> > > > + PINCTRL_PIN(LVDS_OCP, "lvds_ocp"),
> > > > + PINCTRL_PIN(LVDS_OCN, "lvds_ocn"),
> > > > + PINCTRL_PIN(LVDS_OBP, "lvds_obp"),
> > > > + PINCTRL_PIN(LVDS_OBN, "lvds_obn"),
> > > > + PINCTRL_PIN(LVDS_OAP, "lvds_oap"),
> > > > + PINCTRL_PIN(LVDS_OAN, "lvds_oan"),
> > > > + PINCTRL_PIN(LVDS_EEP, "lvds_eep"),
> > > > + PINCTRL_PIN(LVDS_EEN, "lvds_een"),
> > > > + PINCTRL_PIN(LVDS_EDP, "lvds_edp"),
> > > > + PINCTRL_PIN(LVDS_EDN, "lvds_edn"),
> > > > + PINCTRL_PIN(LVDS_ECP, "lvds_ecp"),
> > > > + PINCTRL_PIN(LVDS_ECN, "lvds_ecn"),
> > > > + PINCTRL_PIN(LVDS_EBP, "lvds_ebp"),
> > > > + PINCTRL_PIN(LVDS_EBN, "lvds_ebn"),
> > > > + PINCTRL_PIN(LVDS_EAP, "lvds_eap"),
> > > > + PINCTRL_PIN(LVDS_EAN, "lvds_ean"),
> > > > + PINCTRL_PIN(LCD0_D18, "lcd0_d18"),
> > > > + PINCTRL_PIN(LCD0_D2, "lcd0_d2"),
> > > > + PINCTRL_PIN(DSI_DP3, "dsi_dp3"),
> > > > + PINCTRL_PIN(DSI_DN3, "dsi_dn3"),
> > > > + PINCTRL_PIN(DSI_DP1, "dsi_dp1"),
> > > > + PINCTRL_PIN(DSI_DN1, "dsi_dn1"),
> > > > + PINCTRL_PIN(DSI_CP, "dsi_cp"),
> > > > + PINCTRL_PIN(DSI_CN, "dsi_cn"),
> > > > + PINCTRL_PIN(DSI_DP0, "dsi_dp0"),
> > > > + PINCTRL_PIN(DSI_DN0, "dsi_dn0"),
> > > > + PINCTRL_PIN(DSI_DP2, "dsi_dp2"),
> > > > + PINCTRL_PIN(DSI_DN2, "dsi_dn2"),
> > > > + PINCTRL_PIN(SD0_D0, "sd0_d0"),
> > > > + PINCTRL_PIN(SD0_D1, "sd0_d1"),
> > > > + PINCTRL_PIN(SD0_D2, "sd0_d2"),
> > > > + PINCTRL_PIN(SD0_D3, "sd0_d3"),
> > > > + PINCTRL_PIN(SD1_D0, "sd1_d0"),
> > > > + PINCTRL_PIN(SD1_D1, "sd1_d1"),
> > > > + PINCTRL_PIN(SD1_D2, "sd1_d2"),
> > > > + PINCTRL_PIN(SD1_D3, "sd1_d3"),
> > > > + PINCTRL_PIN(SD0_CMD, "sd0_cmd"),
> > > > + PINCTRL_PIN(SD0_CLK, "sd0_clk"),
> > > > + PINCTRL_PIN(SD1_CMD, "sd1_cmd"),
> > > > + PINCTRL_PIN(SD1_CLK, "sd1_clk"),
> > > > + PINCTRL_PIN(SPI0_SS, "spi0_ss"),
> > > > + PINCTRL_PIN(SPI0_MISO, "spi0_miso"),
> > > > + PINCTRL_PIN(UART0_RX, "uart0_rx"),
> > > > + PINCTRL_PIN(UART0_TX, "uart0_tx"),
> > > > + PINCTRL_PIN(UART2_RX, "uart2_rx"),
> > > > + PINCTRL_PIN(UART2_TX, "uart2_tx"),
> > > > + PINCTRL_PIN(UART2_RTSB, "uart2_rtsb"),
> > > > + PINCTRL_PIN(UART2_CTSB, "uart2_ctsb"),
> > > > + PINCTRL_PIN(UART3_RX, "uart3_rx"),
> > > > + PINCTRL_PIN(UART3_TX, "uart3_tx"),
> > > > + PINCTRL_PIN(UART3_RTSB, "uart3_rtsb"),
> > > > + PINCTRL_PIN(UART3_CTSB, "uart3_ctsb"),
> > > > + PINCTRL_PIN(I2C0_SCLK, "i2c0_sclk"),
> > > > + PINCTRL_PIN(I2C0_SDATA, "i2c0_sdata"),
> > > > + PINCTRL_PIN(I2C1_SCLK, "i2c1_sclk"),
> > > > + PINCTRL_PIN(I2C1_SDATA, "i2c1_sdata"),
> > > > + PINCTRL_PIN(I2C2_SCLK, "i2c2_sclk"),
> > > > + PINCTRL_PIN(I2C2_SDATA, "i2c2_sdata"),
> > > > + PINCTRL_PIN(CSI_DN0, "csi_dn0"),
> > > > + PINCTRL_PIN(CSI_DP0, "csi_dp0"),
> > > > + PINCTRL_PIN(CSI_DN1, "csi_dn1"),
> > > > + PINCTRL_PIN(CSI_DP1, "csi_dp1"),
> > > > + PINCTRL_PIN(CSI_CN, "csi_cn"),
> > > > + PINCTRL_PIN(CSI_CP, "csi_cp"),
> > > > + PINCTRL_PIN(CSI_DN2, "csi_dn2"),
> > > > + PINCTRL_PIN(CSI_DP2, "csi_dp2"),
> > > > + PINCTRL_PIN(CSI_DN3, "csi_dn3"),
> > > > + PINCTRL_PIN(CSI_DP3, "csi_dp3"),
> > > > + PINCTRL_PIN(SENSOR0_PCLK, "sensor0_pclk"),
> > > > + PINCTRL_PIN(SENSOR0_CKOUT, "sensor0_ckout"),
> > > > + PINCTRL_PIN(DNAND_D0, "dnand_d0"),
> > > > + PINCTRL_PIN(DNAND_D1, "dnand_d1"),
> > > > + PINCTRL_PIN(DNAND_D2, "dnand_d2"),
> > > > + PINCTRL_PIN(DNAND_D3, "dnand_d3"),
> > > > + PINCTRL_PIN(DNAND_D4, "dnand_d4"),
> > > > + PINCTRL_PIN(DNAND_D5, "dnand_d5"),
> > > > + PINCTRL_PIN(DNAND_D6, "dnand_d6"),
> > > > + PINCTRL_PIN(DNAND_D7, "dnand_d7"),
> > > > + PINCTRL_PIN(DNAND_WRB, "dnand_wrb"),
> > > > + PINCTRL_PIN(DNAND_RDB, "dnand_rdb"),
> > > > + PINCTRL_PIN(DNAND_RDBN, "dnand_rdbn"),
> > > > + PINCTRL_PIN(DNAND_DQS, "dnand_dqs"),
> > > > + PINCTRL_PIN(DNAND_DQSN, "dnand_dqsn"),
> > > > + PINCTRL_PIN(DNAND_RB0, "dnand_rb0"),
> > > > + PINCTRL_PIN(DNAND_ALE, "dnand_ale"),
> > > > + PINCTRL_PIN(DNAND_CLE, "dnand_cle"),
> > > > + PINCTRL_PIN(DNAND_CEB0, "dnand_ceb0"),
> > > > + PINCTRL_PIN(DNAND_CEB1, "dnand_ceb1"),
> > > > + PINCTRL_PIN(DNAND_CEB2, "dnand_ceb2"),
> > > > + PINCTRL_PIN(DNAND_CEB3, "dnand_ceb3"),
> > > > + PINCTRL_PIN(PORB, "porb"),
> > > > + PINCTRL_PIN(CLKO_25M, "clko_25m"),
> > > > + PINCTRL_PIN(BSEL, "bsel"),
> > > > + PINCTRL_PIN(PKG0, "pkg0"),
> > > > + PINCTRL_PIN(PKG1, "pkg1"),
> > > > + PINCTRL_PIN(PKG2, "pkg2"),
> > > > + PINCTRL_PIN(PKG3, "pkg3"),
> > > > +};
> > > > +
> > > > +enum s700_pinmux_functions {
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_ETH_RGMII,
> > > > + S700_MUX_ETH_SGMII,
> > > > + S700_MUX_SPI0,
> > > > + S700_MUX_SPI1,
> > > > + S700_MUX_SPI2,
> > > > + S700_MUX_SPI3,
> > > > + S700_MUX_SENS0,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_UART0,
> > > > + S700_MUX_UART1,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_UART3,
> > > > + S700_MUX_UART4,
> > > > + S700_MUX_UART5,
> > > > + S700_MUX_UART6,
> > > > + S700_MUX_I2S0,
> > > > + S700_MUX_I2S1,
> > > > + S700_MUX_PCM1,
> > > > + S700_MUX_PCM0,
> > > > + S700_MUX_KS,
> > > > + S700_MUX_JTAG,
> > > > + S700_MUX_PWM0,
> > > > + S700_MUX_PWM1,
> > > > + S700_MUX_PWM2,
> > > > + S700_MUX_PWM3,
> > > > + S700_MUX_PWM4,
> > > > + S700_MUX_PWM5,
> > > > + S700_MUX_P0,
> > > > + S700_MUX_SD0,
> > > > + S700_MUX_SD1,
> > > > + S700_MUX_SD2,
> > > > + S700_MUX_I2C0,
> > > > + S700_MUX_I2C1,
> > > > + S700_MUX_I2C2,
> > > > + S700_MUX_I2C3,
> > > > + S700_MUX_DSI,
> > > > + S700_MUX_LVDS,
> > > > + S700_MUX_USB30,
> > > > + S700_MUX_CLKO_25M,
> > > > + S700_MUX_MIPI_CSI,
> > > > + S700_MUX_NAND,
> > > > + S700_MUX_SPDIF,
> > > > + S700_MUX_SIRQ0,
> > > > + S700_MUX_SIRQ1,
> > > > + S700_MUX_SIRQ2,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_LCD0,
> > > > + S700_MUX_RESERVED,
> > > > +};
> > > > +
> > > > +/*****MFP group data****************************/
> > >
> > > Please remove above banner.
> > >
> > > > +/* mfp0_31_30 reserved */
> > > > +
> > > > +/* rgmii_txd23 */
> > > > +static unsigned int rgmii_txd23_mfp_pads[] = {
> > > > ETH_TXD2, ETH_TXD3};
> > > > +static unsigned int rgmii_txd23_mfp_funcs[] = {
> > > > S700_MUX_ETH_RGMII,
> > > > + S700_MUX_I2C1,
> > > > + S700_MUX_UART3 };
> > > > +/* rgmii_rxd2 */
> > > > +static unsigned int rgmii_rxd2_mfp_pads[] = { ETH_RXD2 };
> > > > +static unsigned int rgmii_rxd2_mfp_funcs[] = {
> > > > S700_MUX_ETH_RGMII,
> > > > + S700_MUX_PWM0,
> > > > + S700_MUX_UART3 };
> > > > +/* rgmii_rxd3 */
> > > > +static unsigned int rgmii_rxd3_mfp_pads[] = { ETH_RXD3};
> > > > +static unsigned int rgmii_rxd3_mfp_funcs[] = {
> > > > S700_MUX_ETH_RGMII,
> > > > + S700_MUX_PWM2,
> > > > + S700_MUX_UART3 };
> > > > +/* lcd0_d18 */
> > > > +static unsigned int lcd0_d18_mfp_pads[] = { LCD0_D18 };
> > > > +static unsigned int lcd0_d18_mfp_funcs[] = { S700_MUX_NOR,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_PWM2,
> > > > + S700_MUX_PWM4,
> > > > + S700_MUX_LCD0 };
> > > > +/* rgmii_txd01 */
> > > > +static unsigned int rgmii_txd01_mfp_pads[] = { ETH_CRS_DV };
> > > > +static unsigned int rgmii_txd01_mfp_funcs[] = {
> > > > S700_MUX_ETH_RGMII,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_SPI2,
> > > > + S700_MUX_UART4,
> > > > + S700_MUX_PWM4 };
> > > > +/* rgmii_txd0 */
> > > > +static unsigned int rgmii_txd0_mfp_pads[] = { ETH_TXD0 };
> > > > +static unsigned int rgmii_txd0_mfp_funcs[] = {
> > > > S700_MUX_ETH_RGMII,
> > > > + S700_MUX_ETH_SGMII,
> > > > + S700_MUX_SPI2,
> > > > + S700_MUX_UART6,
> > > > + S700_MUX_PWM4 };
> > > > +/* rgmii_txd1 */
> > > > +static unsigned int rgmii_txd1_mfp_pads[] = { ETH_TXD1 };
> > > > +static unsigned int rgmii_txd1_mfp_funcs[] = {
> > > > S700_MUX_ETH_RGMII,
> > > > + S700_MUX_ETH_SGMII,
> > > > + S700_MUX_SPI2,
> > > > + S700_MUX_UART6,
> > > > + S700_MUX_PWM5 };
> > > > +/* rgmii_txen */
> > > > +static unsigned int rgmii_txen_mfp_pads[] = { ETH_TXEN };
> > > > +static unsigned int rgmii_txen_mfp_funcs[] = {
> > > > S700_MUX_ETH_RGMII,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_SPI3,
> > > > + S700_MUX_PWM0 };
> > > > +/* rgmii_rxen */
> > > > +static unsigned int rgmii_rxen_mfp_pads[] = { ETH_RXER };
> > > > +static unsigned int rgmii_rxen_mfp_funcs[] = {
> > > > S700_MUX_ETH_RGMII,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_SPI3,
> > > > + S700_MUX_PWM1 };
> > > > +/* mfp0_12_11 reserved */
> > > > +/* rgmii_rxd1*/
> > > > +static unsigned int rgmii_rxd1_mfp_pads[] = { ETH_RXD1 };
> > > > +static unsigned int rgmii_rxd1_mfp_funcs[] = {
> > > > S700_MUX_ETH_RGMII,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_SPI3,
> > > > + S700_MUX_PWM2,
> > > > + S700_MUX_UART5,
> > > > + S700_MUX_ETH_SGMII };
> > > > +/* rgmii_rxd0 */
> > > > +static unsigned int rgmii_rxd0_mfp_pads[] = { ETH_RXD0 };
> > > > +static unsigned int rgmii_rxd0_mfp_funcs[] = {
> > > > S700_MUX_ETH_RGMII,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_SPI3,
> > > > + S700_MUX_PWM3,
> > > > + S700_MUX_UART5,
> > > > + S700_MUX_ETH_SGMII };
> > > > +/* rgmii_ref_clk */
> > > > +static unsigned int rgmii_ref_clk_mfp_pads[] = { ETH_REF_CLK };
> > > > +static unsigned int rgmii_ref_clk_mfp_funcs[] = {
> > > > S700_MUX_ETH_RGMII,
> > > > + S700_MUX_UART4,
> > > > + S700_MUX_SPI2,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_ETH_SGMII };
> > > > +/* i2s_d0 */
> > > > +static unsigned int i2s_d0_mfp_pads[] = { I2S_D0 };
> > > > +static unsigned int i2s_d0_mfp_funcs[] = { S700_MUX_I2S0,
> > > > + S700_MUX_NOR };
> > > > +/* i2s_pcm1 */
> > > > +static unsigned int i2s_pcm1_mfp_pads[] = { I2S_LRCLK0,
> > > > + I2S_MCLK0 };
> > > > +static unsigned int i2s_pcm1_mfp_funcs[] = { S700_MUX_I2S0,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_PCM1,
> > > > + S700_MUX_BT };
> > > > +/* i2s0_pcm0 */
> > > > +static unsigned int i2s0_pcm0_mfp_pads[] = { I2S_BCLK0 };
> > > > +static unsigned int i2s0_pcm0_mfp_funcs[] = { S700_MUX_I2S0,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_PCM0,
> > > > + S700_MUX_BT };
> > > > +/* i2s1_pcm0 */
> > > > +static unsigned int i2s1_pcm0_mfp_pads[] = { I2S_BCLK1,
> > > > + I2S_LRCLK1,
> > > > + I2S_MCLK1 };
> > > > +
> > > > +static unsigned int i2s1_pcm0_mfp_funcs[] = { S700_MUX_I2S1,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_PCM0,
> > > > + S700_MUX_BT };
> > > > +/* i2s_d1 */
> > > > +static unsigned int i2s_d1_mfp_pads[] = { I2S_D1 };
> > > > +static unsigned int i2s_d1_mfp_funcs[] = { S700_MUX_I2S1,
> > > > + S700_MUX_NOR };
> > > > +/* ks_in2 */
> > > > +static unsigned int ks_in2_mfp_pads[] = { KS_IN2 };
> > > > +static unsigned int ks_in2_mfp_funcs[] = { S700_MUX_KS,
> > > > + S700_MUX_JTAG,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_PWM0,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_PWM0,
> > > > + S700_MUX_P0 };
> > > > +/* ks_in1 */
> > > > +static unsigned int ks_in1_mfp_pads[] = { KS_IN1 };
> > > > +static unsigned int ks_in1_mfp_funcs[] = { S700_MUX_KS,
> > > > + S700_MUX_JTAG,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_PWM5,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_PWM1,
> > > > + S700_MUX_USB30 };
> > > > +/* ks_in0 */
> > > > +static unsigned int ks_in0_mfp_pads[] = { KS_IN0 };
> > > > +static unsigned int ks_in0_mfp_funcs[] = { S700_MUX_KS,
> > > > + S700_MUX_JTAG,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_PWM4,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_PWM4,
> > > > + S700_MUX_P0 };
> > > > +/* ks_in3 */
> > > > +static unsigned int ks_in3_mfp_pads[] = { KS_IN3 };
> > > > +static unsigned int ks_in3_mfp_funcs[] = { S700_MUX_KS,
> > > > + S700_MUX_JTAG,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_PWM1,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_SENS1 };
> > > > +/* ks_out0 */
> > > > +static unsigned int ks_out0_mfp_pads[] = { KS_OUT0 };
> > > > +static unsigned int ks_out0_mfp_funcs[] = { S700_MUX_KS,
> > > > + S700_MUX_UART5,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_PWM2,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_SD0,
> > > > + S700_MUX_UART4 };
> > > > +
> > > > +/* ks_out1 */
> > > > +static unsigned int ks_out1_mfp_pads[] = { KS_OUT1 };
> > > > +static unsigned int ks_out1_mfp_funcs[] = { S700_MUX_KS,
> > > > + S700_MUX_JTAG,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_PWM3,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_SD0,
> > > > + S700_MUX_UART4 };
> > > > +/* ks_out2 */
> > > > +static unsigned int ks_out2_mfp_pads[] = { KS_OUT2 };
> > > > +static unsigned int ks_out2_mfp_funcs[] = { S700_MUX_SD0,
> > > > + S700_MUX_KS,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_PWM2,
> > > > + S700_MUX_UART5,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_BT };
> > > > +/* lvds_o_pn */
> > > > +static unsigned int lvds_o_pn_mfp_pads[] = { LVDS_OEP,
> > > > + LVDS_OEN,
> > > > + LVDS_ODP,
> > > > + LVDS_ODN,
> > > > + LVDS_OCP,
> > > > + LVDS_OCN,
> > > > + LVDS_OBP,
> > > > + LVDS_OBN,
> > > > + LVDS_OAP,
> > > > + LVDS_OAN };
> > > > +
> > > > +static unsigned int lvds_o_pn_mfp_funcs[] = { S700_MUX_LVDS,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_LCD0 };
> > > > +
> > > > +/* dsi_dn0 */
> > > > +static unsigned int dsi_dn0_mfp_pads[] = { DSI_DN0 };
> > > > +static unsigned int dsi_dn0_mfp_funcs[] = { S700_MUX_DSI,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_SPI0 };
> > > > +/* dsi_dp2 */
> > > > +static unsigned int dsi_dp2_mfp_pads[] = { DSI_DP2 };
> > > > +static unsigned int dsi_dp2_mfp_funcs[] = { S700_MUX_DSI,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_SPI0,
> > > > + S700_MUX_SD1 };
> > > > +/* lcd0_d2 */
> > > > +static unsigned int lcd0_d2_mfp_pads[] = { LCD0_D2 };
> > > > +static unsigned int lcd0_d2_mfp_funcs[] = { S700_MUX_NOR,
> > > > + S700_MUX_SD0,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_PWM3,
> > > > + S700_MUX_LCD0 };
> > > > +/* dsi_dp3 */
> > > > +static unsigned int dsi_dp3_mfp_pads[] = { DSI_DP3 };
> > > > +static unsigned int dsi_dp3_mfp_funcs[] = { S700_MUX_DSI,
> > > > + S700_MUX_SD0,
> > > > + S700_MUX_SD1,
> > > > + S700_MUX_LCD0 };
> > > > +/* dsi_dn3 */
> > > > +static unsigned int dsi_dn3_mfp_pads[] = { DSI_DN3 };
> > > > +static unsigned int dsi_dn3_mfp_funcs[] = { S700_MUX_DSI,
> > > > + S700_MUX_SD0,
> > > > + S700_MUX_SD1,
> > > > + S700_MUX_LCD0 };
> > > > +/* dsi_dp0 */
> > > > +static unsigned int dsi_dp0_mfp_pads[] = { DSI_DP0 };
> > > > +static unsigned int dsi_dp0_mfp_funcs[] = { S700_MUX_DSI,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_SD0,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_SPI0 };
> > > > +/* lvds_ee_pn */
> > > > +static unsigned int lvds_ee_pn_mfp_pads[] = { LVDS_EEP,
> > > > + LVDS_EEN };
> > > > +static unsigned int lvds_ee_pn_mfp_funcs[] = { S700_MUX_LVDS,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_LCD0 };
> > > > +/* uart2_rx_tx */
> > > > +static unsigned int uart2_rx_tx_mfp_pads[] = { UART2_RX,
> > > > + UART2_TX };
> > > > +static unsigned int uart2_rx_tx_mfp_funcs[] = { S700_MUX_UART2,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_SPI0,
> > > > + S700_MUX_PCM0 };
> > > > +/* spi0_i2c_pcm */
> > > > +static unsigned int spi0_i2c_pcm_mfp_pads[] = { SPI0_SS,
> > > > + SPI0_MISO };
> > > > +static unsigned int spi0_i2c_pcm_mfp_funcs[] = { S700_MUX_SPI0,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_I2S1,
> > > > + S700_MUX_PCM1,
> > > > + S700_MUX_PCM0,
> > > > + S700_MUX_I2C2 };
> > > > +/* mfp2_31 reserved */
> > > > +
> > > > +/* dsi_dnp1_cp_d2 */
> > > > +static unsigned int dsi_dnp1_cp_d2_mfp_pads[] = { DSI_DP1,
> > > > + DSI_CP,
> > > > + DSI_CN };
> > > > +static unsigned int dsi_dnp1_cp_d2_mfp_funcs[] = {
> > > > S700_MUX_DSI,
> > > > + S700_MUX_LCD0,
> > > > + S700_MUX_RESERVED };
> > > > +/* dsi_dnp1_cp_d17 */
> > > > +static unsigned int dsi_dnp1_cp_d17_mfp_pads[] = { DSI_DP1,
> > > > + DSI_CP,
> > > > + DSI_CN };
> > > > +
> > > > +static unsigned int dsi_dnp1_cp_d17_mfp_funcs[] = { S700_MUX_DSI,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_LCD0 };
> > > > +/* lvds_e_pn */
> > > > +static unsigned int lvds_e_pn_mfp_pads[] = { LVDS_EDP,
> > > > + LVDS_EDN,
> > > > + LVDS_ECP,
> > > > + LVDS_ECN,
> > > > + LVDS_EBP,
> > > > + LVDS_EBN,
> > > > + LVDS_EAP,
> > > > + LVDS_EAN };
> > > > +
> > > > +static unsigned int lvds_e_pn_mfp_funcs[] = { S700_MUX_LVDS,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_LCD0 };
> > > > +/* dsi_dn2 */
> > > > +static unsigned int dsi_dn2_mfp_pads[] = { DSI_DN2 };
> > > > +static unsigned int dsi_dn2_mfp_funcs[] = { S700_MUX_DSI,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_SD1,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_SPI0 };
> > > > +/* uart2_rtsb */
> > > > +static unsigned int uart2_rtsb_mfp_pads[] = { UART2_RTSB };
> > > > +static unsigned int uart2_rtsb_mfp_funcs[] = { S700_MUX_UART2,
> > > > + S700_MUX_UART0 };
> > > > +
> > > > +/* uart2_ctsb */
> > > > +static unsigned int uart2_ctsb_mfp_pads[] = { UART2_CTSB };
> > > > +static unsigned int uart2_ctsb_mfp_funcs[] = { S700_MUX_UART2,
> > > > + S700_MUX_UART0 };
> > > > +/* uart3_rtsb */
> > > > +static unsigned int uart3_rtsb_mfp_pads[] = { UART3_RTSB };
> > > > +static unsigned int uart3_rtsb_mfp_funcs[] = { S700_MUX_UART3,
> > > > + S700_MUX_UART5 };
> > > > +
> > > > +/* uart3_ctsb */
> > > > +static unsigned int uart3_ctsb_mfp_pads[] = { UART3_CTSB };
> > > > +static unsigned int uart3_ctsb_mfp_funcs[] = { S700_MUX_UART3,
> > > > + S700_MUX_UART5 };
> > > > +/* sd0_d0 */
> > > > +static unsigned int sd0_d0_mfp_pads[] = { SD0_D0 };
> > > > +static unsigned int sd0_d0_mfp_funcs[] = { S700_MUX_SD0,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_JTAG,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_UART5 };
> > > > +/* sd0_d1 */
> > > > +static unsigned int sd0_d1_mfp_pads[] = { SD0_D1 };
> > > > +static unsigned int sd0_d1_mfp_funcs[] = { S700_MUX_SD0,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_UART5 };
> > > > +/* sd0_d2_d3 */
> > > > +static unsigned int sd0_d2_d3_mfp_pads[] = { SD0_D2,
> > > > + SD0_D3 };
> > > > +static unsigned int sd0_d2_d3_mfp_funcs[] = { S700_MUX_SD0,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_JTAG,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_UART1 };
> > > > +
> > > > +/* sd1_d0_d3 */
> > > > +static unsigned int sd1_d0_d3_mfp_pads[] = { SD1_D0,
> > > > + SD1_D1,
> > > > + SD1_D2,
> > > > + SD1_D3 };
> > > > +static unsigned int sd1_d0_d3_mfp_funcs[] = { S700_MUX_SD0,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_SD1 };
> > > > +
> > > > +/* sd0_cmd */
> > > > +static unsigned int sd0_cmd_mfp_pads[] = { SD0_CMD };
> > > > +static unsigned int sd0_cmd_mfp_funcs[] = { S700_MUX_SD0,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_JTAG };
> > > > +/* sd0_clk */
> > > > +static unsigned int sd0_clk_mfp_pads[] = { SD0_CLK };
> > > > +static unsigned int sd0_clk_mfp_funcs[] = { S700_MUX_SD0,
> > > > + S700_MUX_RESERVED,
> > > > + S700_MUX_JTAG };
> > > > +/* sd1_cmd */
> > > > +static unsigned int sd1_cmd_mfp_pads[] = { SD1_CMD };
> > > > +static unsigned int sd1_cmd_mfp_funcs[] = { S700_MUX_SD1,
> > > > + S700_MUX_NOR };
> > > > +/* uart0_rx */
> > > > +static unsigned int uart0_rx_mfp_pads[] = { UART0_RX };
> > > > +static unsigned int uart0_rx_mfp_funcs[] = { S700_MUX_UART0,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_SPI1,
> > > > + S700_MUX_I2C0,
> > > > + S700_MUX_PCM1,
> > > > + S700_MUX_I2S1 };
> > > > +/* dnand_data_wr1 reserved */
> > > > +
> > > > +/* clko_25m */
> > > > +static unsigned int clko_25m_mfp_pads[] = { CLKO_25M };
> > > > +static unsigned int clko_25m_mfp_funcs[] = { S700_MUX_RESERVED,
> > > > + S700_MUX_CLKO_25M };
> > > > +/* csi_cn_cp */
> > > > +static unsigned int csi_cn_cp_mfp_pads[] = { CSI_CN,
> > > > + CSI_CP };
> > > > +static unsigned int csi_cn_cp_mfp_funcs[] = {
> > > > S700_MUX_MIPI_CSI,
> > > > + S700_MUX_SENS0 };
> > > > +/* dnand_acle_ce07_24 reserved */
> > > > +
> > > > +/* sens0_ckout */
> > > > +static unsigned int sens0_ckout_mfp_pads[] = { SENSOR0_CKOUT };
> > > > +static unsigned int sens0_ckout_mfp_funcs[] = { S700_MUX_SENS0,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_PWM1 };
> > > > +/* uart0_tx */
> > > > +static unsigned int uart0_tx_mfp_pads[] = { UART0_TX };
> > > > +static unsigned int uart0_tx_mfp_funcs[] = { S700_MUX_UART0,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_SPI1,
> > > > + S700_MUX_I2C0,
> > > > + S700_MUX_SPDIF,
> > > > + S700_MUX_PCM1,
> > > > + S700_MUX_I2S1 };
> > > > +/* i2c0_mfp */
> > > > +static unsigned int i2c0_mfp_pads[] = { I2C0_SCLK,
> > > > + I2C0_SDATA };
> > > > +static unsigned int i2c0_mfp_funcs[] = { S700_MUX_I2C0,
> > > > + S700_MUX_UART2,
> > > > + S700_MUX_I2C1,
> > > > + S700_MUX_UART1,
> > > > + S700_MUX_SPI1 };
> > > > +/* csi_dn_dp */
> > > > +static unsigned int csi_dn_dp_mfp_pads[] = { CSI_DN0,
> > > > + CSI_DN1,
> > > > + CSI_DN2,
> > > > + CSI_DN3,
> > > > + CSI_DP0,
> > > > + CSI_DP1,
> > > > + CSI_DP2,
> > > > + CSI_DP3 };
> > > > +static unsigned int csi_dn_dp_mfp_funcs[] = {
> > > > S700_MUX_MIPI_CSI,
> > > > + S700_MUX_SENS0 };
> > > > +/* sen0_pclk */
> > > > +static unsigned int sen0_pclk_mfp_pads[] = { SENSOR0_PCLK };
> > > > +static unsigned int sen0_pclk_mfp_funcs[] = { S700_MUX_SENS0,
> > > > + S700_MUX_NOR,
> > > > + S700_MUX_PWM0 };
> > > > +/* pcm1_in */
> > > > +static unsigned int pcm1_in_mfp_pads[] = { PCM1_IN };
> > > > +static unsigned int pcm1_in_mfp_funcs[] = { S700_MUX_PCM1,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_PWM4 };
> > > > +/* pcm1_clk */
> > > > +static unsigned int pcm1_clk_mfp_pads[] = { PCM1_CLK };
> > > > +static unsigned int pcm1_clk_mfp_funcs[] = { S700_MUX_PCM1,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_PWM5 };
> > > > +/* pcm1_sync */
> > > > +static unsigned int pcm1_sync_mfp_pads[] = { PCM1_SYNC };
> > > > +static unsigned int pcm1_sync_mfp_funcs[] = { S700_MUX_PCM1,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_I2C3 };
> > > > +/* pcm1_out */
> > > > +static unsigned int pcm1_out_mfp_pads[] = { PCM1_OUT };
> > > > +static unsigned int pcm1_out_mfp_funcs[] = { S700_MUX_PCM1,
> > > > + S700_MUX_SENS1,
> > > > + S700_MUX_BT,
> > > > + S700_MUX_I2C3 };
> > > > +/* dnand_data_wr */
> > > > +static unsigned int dnand_data_wr_mfp_pads[] = { DNAND_D0,
> > > > + DNAND_D1,
> > > > + DNAND_D2,
> > > > + DNAND_D3,
> > > > + DNAND_D4,
> > > > + DNAND_D5,
> > > > + DNAND_D6,
> > > > + DNAND_D7,
> > > > + DNAND_RDB,
> > > > + DNAND_RDBN };
> > > > +static unsigned int dnand_data_wr_mfp_funcs[] = {
> > > > S700_MUX_NAND,
> > > > + S700_MUX_SD2 };
> > > > +/* dnand_acle_ce0 */
> > > > +static unsigned int dnand_acle_ce0_mfp_pads[] = { DNAND_ALE,
> > > > + DNAND_CLE,
> > > > + DNAND_CEB0,
> > > > + DNAND_CEB1 };
> > > > +static unsigned int dnand_acle_ce0_mfp_funcs[] = {
> > > > S700_MUX_NAND,
> > > > + S700_MUX_SPI2 };
> > > > +
> > > > +/* nand_ceb2 */
> > > > +static unsigned int nand_ceb2_mfp_pads[] = { DNAND_CEB2 };
> > > > +static unsigned int nand_ceb2_mfp_funcs[] = { S700_MUX_NAND,
> > > > + S700_MUX_PWM5 };
> > > > +/* nand_ceb3 */
> > > > +static unsigned int nand_ceb3_mfp_pads[] = { DNAND_CEB3 };
> > > > +static unsigned int nand_ceb3_mfp_funcs[] = { S700_MUX_NAND,
> > > > + S700_MUX_PWM4 };
> > > > +/*****End MFP group data****************************/
> > > > +
> > > > +/*****PADDRV group data****************************/
> > > > +
> > > > +/*PAD_DRV0*/
> > > > +static unsigned int sirq_drv_pads[] = { SIRQ0,
> > > > + SIRQ1,
> > > > + SIRQ2 };
> > > > +
> > > > +static unsigned int rgmii_txd23_drv_pads[] = { ETH_TXD2,
> > > > + ETH_TXD3 };
> > > > +
> > > > +static unsigned int rgmii_rxd23_drv_pads[] = { ETH_RXD2,
> > > > + ETH_RXD3 };
> > > > +
> > > > +static unsigned int rgmii_txd01_txen_drv_pads[] = { ETH_TXD0,
> > > > + ETH_TXD1,
> > > > + ETH_TXEN };
> > > > +
> > > > +static unsigned int rgmii_rxer_drv_pads[] = { ETH_RXER };
> > > > +
> > > > +static unsigned int rgmii_crs_drv_pads[] = { ETH_CRS_DV };
> > > > +
> > > > +static unsigned int rgmii_rxd10_drv_pads[] = { ETH_RXD0,
> > > > + ETH_RXD1 };
> > > > +
> > > > +static unsigned int rgmii_ref_clk_drv_pads[] = { ETH_REF_CLK };
> > > > +
> > > > +static unsigned int smi_mdc_mdio_drv_pads[] = { ETH_MDC,
> > > > + ETH_MDIO };
> > > > +
> > > > +static unsigned int i2s_d0_drv_pads[] = { I2S_D0 };
> > > > +
> > > > +static unsigned int i2s_bclk0_drv_pads[] = { I2S_BCLK0 };
> > > > +
> > > > +static unsigned int i2s3_drv_pads[] = { I2S_LRCLK0,
> > > > + I2S_MCLK0,
> > > > + I2S_D1 };
> > > > +
> > > > +static unsigned int i2s13_drv_pads[] = { I2S_BCLK1,
> > > > + I2S_LRCLK1,
> > > > + I2S_MCLK1 };
> > > > +
> > > > +static unsigned int pcm1_drv_pads[] = { PCM1_IN,
> > > > + PCM1_CLK,
> > > > + PCM1_SYNC,
> > > > + PCM1_OUT };
> > > > +
> > > > +static unsigned int ks_in_drv_pads[] = { KS_IN0,
> > > > + KS_IN1,
> > > > + KS_IN2,
> > > > + KS_IN3 };
> > > > +
> > > > +/*PAD_DRV1*/
> > > > +static unsigned int ks_out_drv_pads[] = { KS_OUT0,
> > > > + KS_OUT1,
> > > > + KS_OUT2 };
> > > > +
> > > > +static unsigned int lvds_all_drv_pads[] = { LVDS_OEP,
> > > > + LVDS_OEN,
> > > > + LVDS_ODP,
> > > > + LVDS_ODN,
> > > > + LVDS_OCP,
> > > > + LVDS_OCN,
> > > > + LVDS_OBP,
> > > > + LVDS_OBN,
> > > > + LVDS_OAP,
> > > > + LVDS_OAN,
> > > > + LVDS_EEP,
> > > > + LVDS_EEN,
> > > > + LVDS_EDP,
> > > > + LVDS_EDN,
> > > > + LVDS_ECP,
> > > > + LVDS_ECN,
> > > > + LVDS_EBP,
> > > > + LVDS_EBN,
> > > > + LVDS_EAP,
> > > > + LVDS_EAN };
> > > > +
> > > > +static unsigned int lcd_d18_d2_drv_pads[] = { LCD0_D18,
> > > > + LCD0_D2 };
> > > > +
> > > > +static unsigned int dsi_all_drv_pads[] = { DSI_DP0,
> > > > + DSI_DN0,
> > > > + DSI_DP2,
> > > > + DSI_DN2,
> > > > + DSI_DP3,
> > > > + DSI_DN3,
> > > > + DSI_DP1,
> > > > + DSI_DN1,
> > > > + DSI_CP,
> > > > + DSI_CN };
> > > > +
> > > > +static unsigned int sd0_d0_d3_drv_pads[] = { SD0_D0,
> > > > + SD0_D1,
> > > > + SD0_D2,
> > > > + SD0_D3 };
> > > > +
> > > > +static unsigned int sd0_cmd_drv_pads[] = { SD0_CMD };
> > > > +
> > > > +static unsigned int sd0_clk_drv_pads[] = { SD0_CLK };
> > > > +
> > > > +static unsigned int spi0_all_drv_pads[] = { SPI0_SS,
> > > > + SPI0_MISO };
> > > > +
> > > > +/*PAD_DRV2*/
> > > > +static unsigned int uart0_rx_drv_pads[] = { UART0_RX };
> > > > +
> > > > +static unsigned int uart0_tx_drv_pads[] = { UART0_TX };
> > > > +
> > > > +static unsigned int uart2_all_drv_pads[] = { UART2_RX,
> > > > + UART2_TX,
> > > > + UART2_RTSB,
> > > > + UART2_CTSB };
> > > > +
> > > > +static unsigned int i2c0_all_drv_pads[] = { I2C0_SCLK,
> > > > + I2C0_SDATA };
> > > > +
> > > > +static unsigned int i2c12_all_drv_pads[] = { I2C1_SCLK,
> > > > + I2C1_SDATA,
> > > > + I2C2_SCLK,
> > > > + I2C2_SDATA };
> > > > +
> > > > +static unsigned int sens0_pclk_drv_pads[] = { SENSOR0_PCLK };
> > > > +
> > > > +static unsigned int sens0_ckout_drv_pads[] = { SENSOR0_CKOUT };
> > > > +
> > > > +static unsigned int uart3_all_drv_pads[] = { UART3_RX,
> > > > + UART3_TX,
> > > > + UART3_RTSB,
> > > > + UART3_CTSB };
> > > > +
> > > > +/*****End PADDRV group data****************************/
> > > > +
> > >
> > > Remove this also.
> > >
> > > > +/* all pinctrl groups of S700 board */
> > > > +static const struct owl_pingroup s700_groups[] = {
> > > > + MUX_PG(rgmii_txd23_mfp, 0, 28, 2),
> > > > + MUX_PG(rgmii_rxd2_mfp, 0, 26, 2),
> > > > + MUX_PG(rgmii_rxd3_mfp, 0, 26, 2),
> > > > + MUX_PG(lcd0_d18_mfp, 0, 23, 3),
> > > > + MUX_PG(rgmii_txd01_mfp, 0, 20, 3),
> > > > + MUX_PG(rgmii_txd0_mfp, 0, 16, 3),
> > > > + MUX_PG(rgmii_txd1_mfp, 0, 16, 3),
> > > > + MUX_PG(rgmii_txen_mfp, 0, 13, 3),
> > > > + MUX_PG(rgmii_rxen_mfp, 0, 13, 3),
> > > > + MUX_PG(rgmii_rxd1_mfp, 0, 8, 3),
> > > > + MUX_PG(rgmii_rxd0_mfp, 0, 8, 3),
> > > > + MUX_PG(rgmii_ref_clk_mfp, 0, 6, 2),
> > > > + MUX_PG(i2s_d0_mfp, 0, 5, 1),
> > > > + MUX_PG(i2s_pcm1_mfp, 0, 3, 2),
> > > > + MUX_PG(i2s0_pcm0_mfp, 0, 1, 2),
> > > > + MUX_PG(i2s1_pcm0_mfp, 0, 1, 2),
> > > > + MUX_PG(i2s_d1_mfp, 0, 0, 1),
> > > > + MUX_PG(ks_in2_mfp, 1, 29, 3),
> > > > + MUX_PG(ks_in1_mfp, 1, 29, 3),
> > > > + MUX_PG(ks_in0_mfp, 1, 29, 3),
> > > > + MUX_PG(ks_in3_mfp, 1, 26, 3),
> > > > + MUX_PG(ks_out0_mfp, 1, 26, 3),
> > > > + MUX_PG(ks_out1_mfp, 1, 26, 3),
> > > > + MUX_PG(ks_out2_mfp, 1, 23, 3),
> > > > + MUX_PG(lvds_o_pn_mfp, 1, 21, 2),
> > > > + MUX_PG(dsi_dn0_mfp, 1, 19, 2),
> > > > + MUX_PG(dsi_dp2_mfp, 1, 17, 2),
> > > > + MUX_PG(lcd0_d2_mfp, 1, 14, 3),
> > > > + MUX_PG(dsi_dp3_mfp, 1, 12, 2),
> > > > + MUX_PG(dsi_dn3_mfp, 1, 10, 2),
> > > > + MUX_PG(dsi_dp0_mfp, 1, 7, 3),
> > > > + MUX_PG(lvds_ee_pn_mfp, 1, 5, 2),
> > > > + MUX_PG(uart2_rx_tx_mfp, 1, 3, 2),
> > > > + MUX_PG(spi0_i2c_pcm_mfp, 1, 0, 3),
> > > > + MUX_PG(dsi_dnp1_cp_d2_mfp, 2, 29, 2),
> > > > + MUX_PG(dsi_dnp1_cp_d17_mfp, 2, 29, 2),
> > > > + MUX_PG(lvds_e_pn_mfp, 2, 27, 2),
> > > > + MUX_PG(dsi_dn2_mfp, 2, 24, 3),
> > > > + MUX_PG(uart2_rtsb_mfp, 2, 23, 1),
> > > > + MUX_PG(uart2_ctsb_mfp, 2, 22, 1),
> > > > + MUX_PG(uart3_rtsb_mfp, 2, 21, 1),
> > > > + MUX_PG(uart3_ctsb_mfp, 2, 20, 1),
> > > > + MUX_PG(sd0_d0_mfp, 2, 17, 3),
> > > > + MUX_PG(sd0_d1_mfp, 2, 14, 3),
> > > > + MUX_PG(sd0_d2_d3_mfp, 2, 11, 3),
> > > > + MUX_PG(sd1_d0_d3_mfp, 2, 9, 2),
> > > > + MUX_PG(sd0_cmd_mfp, 2, 7, 2),
> > > > + MUX_PG(sd0_clk_mfp, 2, 5, 2),
> > > > + MUX_PG(sd1_cmd_mfp, 2, 3, 2),
> > > > + MUX_PG(uart0_rx_mfp, 2, 0, 3),
> > > > + MUX_PG(clko_25m_mfp, 3, 30, 1),
> > > > + MUX_PG(csi_cn_cp_mfp, 3, 28, 2),
> > > > + MUX_PG(sens0_ckout_mfp, 3, 22, 2),
> > > > + MUX_PG(uart0_tx_mfp, 3, 19, 3),
> > > > + MUX_PG(i2c0_mfp, 3, 16, 3),
> > > > + MUX_PG(csi_dn_dp_mfp, 3, 14, 2),
> > > > + MUX_PG(sen0_pclk_mfp, 3, 12, 2),
> > > > + MUX_PG(pcm1_in_mfp, 3, 10, 2),
> > > > + MUX_PG(pcm1_clk_mfp, 3, 8, 2),
> > > > + MUX_PG(pcm1_sync_mfp, 3, 6, 2),
> > > > + MUX_PG(pcm1_out_mfp, 3, 4, 2),
> > > > + MUX_PG(dnand_data_wr_mfp, 3, 3, 1),
> > > > + MUX_PG(dnand_acle_ce0_mfp, 3, 2, 1),
> > > > + MUX_PG(nand_ceb2_mfp, 3, 0, 2),
> > > > + MUX_PG(nand_ceb3_mfp, 3, 0, 2),
> > > > +
> > > > + DRV_PG(sirq_drv, 0, 28, 2),
> > > > + DRV_PG(rgmii_txd23_drv, 0, 26, 2),
> > > > + DRV_PG(rgmii_rxd23_drv, 0, 24, 2),
> > > > + DRV_PG(rgmii_txd01_txen_drv, 0, 22, 2),
> > > > + DRV_PG(rgmii_rxer_drv, 0, 20, 2),
> > > > + DRV_PG(rgmii_crs_drv, 0, 18, 2),
> > > > + DRV_PG(rgmii_rxd10_drv, 0, 16, 2),
> > > > + DRV_PG(rgmii_ref_clk_drv, 0, 14, 2),
> > > > + DRV_PG(smi_mdc_mdio_drv, 0, 12, 2),
> > > > + DRV_PG(i2s_d0_drv, 0, 10, 2),
> > > > + DRV_PG(i2s_bclk0_drv, 0, 8, 2),
> > > > + DRV_PG(i2s3_drv, 0, 6, 2),
> > > > + DRV_PG(i2s13_drv, 0, 4, 2),
> > > > + DRV_PG(pcm1_drv, 0, 2, 2),
> > > > + DRV_PG(ks_in_drv, 0, 0, 2),
> > > > + DRV_PG(ks_out_drv, 1, 30, 2),
> > > > + DRV_PG(lvds_all_drv, 1, 28, 2),
> > > > + DRV_PG(lcd_d18_d2_drv, 1, 26, 2),
> > > > + DRV_PG(dsi_all_drv, 1, 24, 2),
> > > > + DRV_PG(sd0_d0_d3_drv, 1, 22, 2),
> > > > + DRV_PG(sd0_cmd_drv, 1, 18, 2),
> > > > + DRV_PG(sd0_clk_drv, 1, 16, 2),
> > > > + DRV_PG(spi0_all_drv, 1, 10, 2),
> > > > + DRV_PG(uart0_rx_drv, 2, 30, 2),
> > > > + DRV_PG(uart0_tx_drv, 2, 28, 2),
> > > > + DRV_PG(uart2_all_drv, 2, 26, 2),
> > > > + DRV_PG(i2c0_all_drv, 2, 23, 2),
> > > > + DRV_PG(i2c12_all_drv, 2, 21, 2),
> > > > + DRV_PG(sens0_pclk_drv, 2, 18, 2),
> > > > + DRV_PG(sens0_ckout_drv, 2, 12, 2),
> > > > + DRV_PG(uart3_all_drv, 2, 2, 2),
> > > > +};
> > > > +
> > > > +static const char * const nor_groups[] = {
> > > > + "lcd0_d18",
> > > > + "i2s_d0",
> > > > + "i2s0_pcm0",
> > > > + "i2s1_pcm0",
> > > > + "i2s_d1",
> > > > + "ks_in2",
> > > > + "ks_in1",
> > > > + "ks_in0",
> > > > + "ks_in3",
> > > > + "ks_out0",
> > > > + "ks_out1",
> > > > + "ks_out2",
> > > > + "lcd0_d2",
> > > > + "lvds_ee_pn",
> > > > + "uart2_rx_tx",
> > > > + "spi0_i2c_pcm",
> > > > + "lvds_e_pn",
> > > > + "sd0_d0",
> > > > + "sd0_d1",
> > > > + "sd0_d2_d3",
> > > > + "sd1_d0_d3",
> > > > + "sd0_cmd",
> > > > + "sd1_cmd",
> > > > + "sens0_ckout",
> > > > + "sen0_pclk",
> > > > +};
> > > > +
> > > > +static const char * const eth_rmii_groups[] = {
> > > > + "rgmii_txd23",
> > > > + "rgmii_rxd2",
> > > > + "rgmii_rxd3",
> > > > + "rgmii_txd01",
> > > > + "rgmii_txd0",
> > > > + "rgmii_txd1",
> > > > + "rgmii_txen",
> > > > + "rgmii_rxen",
> > > > + "rgmii_rxd1",
> > > > + "rgmii_rxd0",
> > > > + "rgmii_ref_clk",
> > > > + "eth_smi_dummy",
> > > > +};
> > > > +
> > > > +static const char * const eth_smii_groups[] = {
> > > > + "rgmii_txd0",
> > > > + "rgmii_txd1",
> > > > + "rgmii_rxd0",
> > > > + "rgmii_rxd1",
> > > > + "rgmii_ref_clk",
> > > > + "eth_smi_dummy",
> > > > +};
> > > > +
> > > > +static const char * const spi0_groups[] = {
> > > > + "dsi_dn0",
> > > > + "dsi_dp2",
> > > > + "dsi_dp0",
> > > > + "uart2_rx_tx",
> > > > + "spi0_i2c_pcm",
> > > > + "dsi_dn2",
> > > > +
> > >
> > > Remove this empty line.
> > >
> > > > +};
> > > > +
> > > > +static const char * const spi1_groups[] = {
> > > > + "uart0_rx",
> > > > + "uart0_tx",
> > > > + "i2c0_mfp",
> > > > +};
> > > > +
> > > > +static const char * const spi2_groups[] = {
> > > > + "rgmii_txd01",
> > > > + "rgmii_txd0",
> > > > + "rgmii_txd1",
> > > > + "rgmii_ref_clk",
> > > > + "dnand_acle_ce0",
> > > > +};
> > > > +
> > > > +static const char * const spi3_groups[] = {
> > > > + "rgmii_txen",
> > > > + "rgmii_rxen",
> > > > + "rgmii_rxd1",
> > > > + "rgmii_rxd0",
> > > > +};
> > > > +
> > > > +static const char * const sens0_groups[] = {
> > > > + "csi_cn_cp",
> > > > + "sens0_ckout",
> > > > + "csi_dn_dp",
> > > > + "sen0_pclk",
> > > > +};
> > > > +
> > > > +static const char * const sens1_groups[] = {
> > > > + "lcd0_d18",
> > > > + "ks_in2",
> > > > + "ks_in1",
> > > > + "ks_in0",
> > > > + "ks_in3",
> > > > + "ks_out0",
> > > > + "ks_out1",
> > > > + "ks_out2",
> > > > + "sens0_ckout",
> > > > + "pcm1_in",
> > > > + "pcm1_clk",
> > > > + "pcm1_sync",
> > > > + "pcm1_out",
> > > > +};
> > > > +
> > > > +static const char * const uart0_groups[] = {
> > > > + "uart2_rtsb",
> > > > + "uart2_ctsb",
> > > > + "uart0_rx",
> > > > + "uart0_tx",
> > > > +};
> > > > +
> > > > +static const char * const uart1_groups[] = {
> > > > + "sd0_d2_d3",
> > > > + "i2c0_mfp",
> > > > +};
> > > > +
> > > > +static const char * const uart2_groups[] = {
> > > > + "rgmii_txen",
> > > > + "rgmii_rxen",
> > > > + "rgmii_rxd1",
> > > > + "rgmii_rxd0",
> > > > + "dsi_dn0",
> > > > + "dsi_dp2",
> > > > + "dsi_dp0",
> > > > + "uart2_rx_tx",
> > > > + "dsi_dn2",
> > > > + "uart2_rtsb",
> > > > + "uart2_ctsb",
> > > > + "sd0_d0",
> > > > + "sd0_d1",
> > > > + "sd0_d2_d3",
> > > > + "uart0_rx",
> > > > + "uart0_tx",
> > > > + "i2c0_mfp",
> > > > + "uart2_dummy"
> > > > +};
> > > > +
> > > > +static const char * const uart3_groups[] = {
> > > > + "rgmii_txd23",
> > > > + "rgmii_rxd2",
> > > > + "rgmii_rxd3",
> > > > + "uart3_rtsb",
> > > > + "uart3_ctsb",
> > > > + "uart3_dummy"
> > > > +};
> > > > +
> > > > +static const char * const uart4_groups[] = {
> > > > + "rgmii_txd01",
> > > > + "rgmii_ref_clk",
> > > > + "ks_out0",
> > > > + "ks_out1",
> > > > +
> > >
> > > Ditto.
> > >
> > > > +};
> > > > +
> > > > +static const char * const uart5_groups[] = {
> > > > + "rgmii_rxd1",
> > > > + "rgmii_rxd0",
> > > > + "ks_out0",
> > > > + "ks_out2",
> > > > + "uart3_rtsb",
> > > > + "uart3_ctsb",
> > > > + "sd0_d0",
> > > > + "sd0_d1",
> > > > +};
> > > > +
> > > > +static const char * const uart6_groups[] = {
> > > > + "rgmii_txd0",
> > > > + "rgmii_txd1",
> > > > +
> > >
> > > Ditto.
> > >
> > > > +};
> > > > +
> > > > +static const char * const i2s0_groups[] = {
> > > > + "i2s_d0",
> > > > + "i2s_pcm1",
> > > > + "i2s0_pcm0",
> > > > +};
> > > > +
> > > > +static const char * const i2s1_groups[] = {
> > > > + "i2s1_pcm0",
> > > > + "i2s_d1",
> > > > + "i2s1_dummy",
> > > > + "spi0_i2c_pcm",
> > > > + "uart0_rx",
> > > > + "uart0_tx",
> > > > +};
> > > > +
> > > > +static const char * const pcm1_groups[] = {
> > > > + "i2s_pcm1",
> > > > + "spi0_i2c_pcm",
> > > > + "uart0_rx",
> > > > + "uart0_tx",
> > > > + "pcm1_in",
> > > > + "pcm1_clk",
> > > > + "pcm1_sync",
> > > > + "pcm1_out",
> > > > +};
> > > > +
> > > > +static const char * const pcm0_groups[] = {
> > > > + "i2s0_pcm0",
> > > > + "i2s1_pcm0",
> > > > + "uart2_rx_tx",
> > > > + "spi0_i2c_pcm",
> > > > +};
> > > > +
> > > > +static const char * const ks_groups[] = {
> > > > + "ks_in2",
> > > > + "ks_in1",
> > > > + "ks_in0",
> > > > + "ks_in3",
> > > > + "ks_out0",
> > > > + "ks_out1",
> > > > + "ks_out2",
> > > > +};
> > > > +
> > > > +static const char * const jtag_groups[] = {
> > > > + "ks_in2",
> > > > + "ks_in1",
> > > > + "ks_in0",
> > > > + "ks_in3",
> > > > + "ks_out1",
> > > > + "sd0_d0",
> > > > + "sd0_d2_d3",
> > > > + "sd0_cmd",
> > > > + "sd0_clk",
> > > > +};
> > > > +
> > > > +static const char * const pwm0_groups[] = {
> > > > + "rgmii_rxd2",
> > > > + "rgmii_txen",
> > > > + "ks_in2",
> > > > +
> > >
> > > Ditto.
> > >
> > > > + "sen0_pclk",
> > > > +};
> > > > +
> > > > +static const char * const pwm1_groups[] = {
> > > > + "rgmii_rxen",
> > > > + "ks_in1",
> > > > + "ks_in3",
> > > > + "sens0_ckout",
> > > > +};
> > > > +
> > > > +static const char * const pwm2_groups[] = {
> > > > + "lcd0_d18",
> > > > + "rgmii_rxd3",
> > > > + "rgmii_rxd1",
> > > > + "ks_out0",
> > > > + "ks_out2",
> > > > +};
> > > > +
> > > > +static const char * const pwm3_groups[] = {
> > > > + "rgmii_rxd0",
> > > > + "ks_out1",
> > > > + "lcd0_d2",
> > > > +};
> > > > +
> > > > +static const char * const pwm4_groups[] = {
> > > > + "lcd0_d18",
> > > > + "rgmii_txd01",
> > > > + "rgmii_txd0",
> > > > + "ks_in0",
> > > > + "pcm1_in",
> > > > + "nand_ceb3",
> > > > +};
> > > > +
> > > > +static const char * const pwm5_groups[] = {
> > > > + "rgmii_txd1",
> > > > + "ks_in1",
> > > > + "pcm1_clk",
> > > > + "nand_ceb2",
> > > > +};
> > > > +
> > > > +static const char * const p0_groups[] = {
> > > > + "ks_in2",
> > > > + "ks_in0",
> > > > +};
> > > > +
> > > > +static const char * const sd0_groups[] = {
> > > > + "ks_out0",
> > > > + "ks_out1",
> > > > + "ks_out2",
> > > > + "lcd0_d2",
> > > > + "dsi_dp3",
> > > > + "dsi_dp0",
> > > > + "sd0_d0",
> > > > + "sd0_d1",
> > > > + "sd0_d2_d3",
> > > > + "sd1_d0_d3",
> > > > + "sd0_cmd",
> > > > + "sd0_clk",
> > > > +};
> > > > +
> > > > +static const char * const sd1_groups[] = {
> > > > + "dsi_dp2",
> > > > + "mfp1_16_14",
> > > > + "lcd0_d2",
> > > > + "mfp1_16_14_d17",
> > > > + "dsi_dp3",
> > > > + "dsi_dn3",
> > > > + "dsi_dnp1_cp_d2",
> > > > + "dsi_dnp1_cp_d17",
> > > > + "dsi_dn2",
> > > > + "sd1_d0_d3",
> > > > + "sd1_cmd",
> > > > + "sd1_dummy",
> > > > +};
> > > > +
> > > > +static const char * const sd2_groups[] = {
> > > > + "dnand_data_wr",
> > > > +};
> > > > +
> > > > +static const char * const i2c0_groups[] = {
> > > > + "uart0_rx",
> > > > + "uart0_tx",
> > > > + "i2c0_mfp",
> > > > +};
> > > > +
> > > > +static const char * const i2c1_groups[] = {
> > > > + "i2c0_mfp",
> > > > + "i2c1_dummy"
> > > > +};
> > > > +
> > > > +static const char * const i2c2_groups[] = {
> > > > + "i2c2_dummy"
> > > > +};
> > > > +
> > > > +static const char * const i2c3_groups[] = {
> > > > + "uart2_rx_tx",
> > > > + "pcm1_sync",
> > > > + "pcm1_out",
> > > > +};
> > > > +
> > > > +static const char * const lvds_groups[] = {
> > > > + "lvds_o_pn",
> > > > + "lvds_ee_pn",
> > > > + "lvds_e_pn",
> > > > +};
> > > > +
> > > > +static const char * const bt_groups[] = {
> > > > + "i2s_pcm1",
> > > > + "i2s0_pcm0",
> > > > + "i2s1_pcm0",
> > > > + "ks_in2",
> > > > + "ks_in1",
> > > > + "ks_in0",
> > > > + "ks_in3",
> > > > + "ks_out0",
> > > > + "ks_out1",
> > > > + "ks_out2",
> > > > + "lvds_o_pn",
> > > > + "lvds_ee_pn",
> > > > + "pcm1_in",
> > > > + "pcm1_clk",
> > > > + "pcm1_sync",
> > > > + "pcm1_out",
> > > > +};
> > > > +
> > > > +static const char * const lcd0_groups[] = {
> > > > + "lcd0_d18",
> > > > + "lcd0_d2",
> > > > + "mfp1_16_14_d17",
> > > > + "lvds_o_pn",
> > > > + "dsi_dp3",
> > > > + "dsi_dn3",
> > > > + "lvds_ee_pn",
> > > > + "dsi_dnp1_cp_d2",
> > > > + "dsi_dnp1_cp_d17",
> > > > + "lvds_e_pn",
> > > > +};
> > > > +
> > > > +
> > > > +static const char * const usb30_groups[] = {
> > > > + "ks_in1",
> > > > +};
> > > > +
> > > > +static const char * const clko_25m_groups[] = {
> > > > + "clko_25m",
> > > > +};
> > > > +
> > > > +static const char * const mipi_csi_groups[] = {
> > > > + "csi_cn_cp",
> > > > + "csi_dn_dp",
> > > > +};
> > > > +
> > > > +static const char * const dsi_groups[] = {
> > > > + "dsi_dn0",
> > > > + "dsi_dp2",
> > > > + "dsi_dp3",
> > > > + "dsi_dn3",
> > > > + "dsi_dp0",
> > > > + "dsi_dnp1_cp_d2",
> > > > + "dsi_dnp1_cp_d17",
> > > > + "dsi_dn2",
> > > > + "dsi_dummy",
> > > > +};
> > > > +
> > > > +static const char * const nand_groups[] = {
> > > > + "dnand_data_wr",
> > > > + "dnand_acle_ce0",
> > > > + "nand_ceb2",
> > > > + "nand_ceb3",
> > > > + "nand_dummy",
> > > > +};
> > > > +
> > > > +static const char * const spdif_groups[] = {
> > > > + "uart0_tx",
> > > > +};
> > > > +
> > >
> > > Ditto.
> > >
> > > > +
> > > > +static const char * const sirq0_groups[] = {
> > > > + "sirq0_dummy",
> > > > +};
> > > > +
> > > > +static const char * const sirq1_groups[] = {
> > > > + "sirq1_dummy",
> > > > +};
> > > > +
> > > > +static const char * const sirq2_groups[] = {
> > > > + "sirq2_dummy",
> > > > +};
> > > > +
> > > > +static const struct owl_pinmux_func s700_functions[] = {
> > > > + [S700_MUX_NOR] = FUNCTION(nor),
> > > > + [S700_MUX_ETH_RGMII] = FUNCTION(eth_rmii),
> > > > + [S700_MUX_ETH_SGMII] = FUNCTION(eth_smii),
> > > > + [S700_MUX_SPI0] = FUNCTION(spi0),
> > > > + [S700_MUX_SPI1] = FUNCTION(spi1),
> > > > + [S700_MUX_SPI2] = FUNCTION(spi2),
> > > > + [S700_MUX_SPI3] = FUNCTION(spi3),
> > > > + [S700_MUX_SENS0] = FUNCTION(sens0),
> > > > + [S700_MUX_SENS1] = FUNCTION(sens1),
> > > > + [S700_MUX_UART0] = FUNCTION(uart0),
> > > > + [S700_MUX_UART1] = FUNCTION(uart1),
> > > > + [S700_MUX_UART2] = FUNCTION(uart2),
> > > > + [S700_MUX_UART3] = FUNCTION(uart3),
> > > > + [S700_MUX_UART4] = FUNCTION(uart4),
> > > > + [S700_MUX_UART5] = FUNCTION(uart5),
> > > > + [S700_MUX_UART6] = FUNCTION(uart6),
> > > > + [S700_MUX_I2S0] = FUNCTION(i2s0),
> > > > + [S700_MUX_I2S1] = FUNCTION(i2s1),
> > > > + [S700_MUX_PCM1] = FUNCTION(pcm1),
> > > > + [S700_MUX_PCM0] = FUNCTION(pcm0),
> > > > + [S700_MUX_KS] = FUNCTION(ks),
> > > > + [S700_MUX_JTAG] = FUNCTION(jtag),
> > > > + [S700_MUX_PWM0] = FUNCTION(pwm0),
> > > > + [S700_MUX_PWM1] = FUNCTION(pwm1),
> > > > + [S700_MUX_PWM2] = FUNCTION(pwm2),
> > > > + [S700_MUX_PWM3] = FUNCTION(pwm3),
> > > > + [S700_MUX_PWM4] = FUNCTION(pwm4),
> > > > + [S700_MUX_PWM5] = FUNCTION(pwm5),
> > > > + [S700_MUX_P0] = FUNCTION(p0),
> > > > + [S700_MUX_SD0] = FUNCTION(sd0),
> > > > + [S700_MUX_SD1] = FUNCTION(sd1),
> > > > + [S700_MUX_SD2] = FUNCTION(sd2),
> > > > + [S700_MUX_I2C0] = FUNCTION(i2c0),
> > > > + [S700_MUX_I2C1] = FUNCTION(i2c1),
> > > > + [S700_MUX_I2C2] = FUNCTION(i2c2),
> > > > + [S700_MUX_I2C3] = FUNCTION(i2c3),
> > > > + [S700_MUX_DSI] = FUNCTION(dsi),
> > > > + [S700_MUX_LVDS] = FUNCTION(lvds),
> > > > + [S700_MUX_USB30] = FUNCTION(usb30),
> > > > + [S700_MUX_CLKO_25M] = FUNCTION(clko_25m),
> > > > + [S700_MUX_MIPI_CSI] = FUNCTION(mipi_csi),
> > > > + [S700_MUX_DSI] = FUNCTION(dsi),
> > > > + [S700_MUX_NAND] = FUNCTION(nand),
> > > > + [S700_MUX_SPDIF] = FUNCTION(spdif),
> > > > + [S700_MUX_SIRQ0] = FUNCTION(sirq0),
> > > > + [S700_MUX_SIRQ1] = FUNCTION(sirq1),
> > > > + [S700_MUX_SIRQ2] = FUNCTION(sirq2),
> > > > + [S700_MUX_BT] = FUNCTION(bt),
> > > > + [S700_MUX_LCD0] = FUNCTION(lcd0),
> > > > +};
> > > > +
> > > > +/*PAD_ST0*/
> > >
> > > /* PAD_ST0 */
> > >
> > > > +static PAD_ST_CONF(UART2_TX, 0, 31, 1);
> > > > +static PAD_ST_CONF(I2C0_SDATA, 0, 30, 1);
> > > > +static PAD_ST_CONF(UART0_RX, 0, 29, 1);
> > > > +static PAD_ST_CONF(I2S_MCLK1, 0, 23, 1);
> > > > +static PAD_ST_CONF(ETH_REF_CLK, 0, 22, 1);
> > > > +static PAD_ST_CONF(ETH_TXEN, 0, 21, 1);
> > > > +static PAD_ST_CONF(ETH_TXD0, 0, 20, 1);
> > > > +static PAD_ST_CONF(I2S_LRCLK1, 0, 19, 1);
> > > > +static PAD_ST_CONF(DSI_DP0, 0, 16, 1);
> > > > +static PAD_ST_CONF(DSI_DN0, 0, 15, 1);
> > > > +static PAD_ST_CONF(UART0_TX, 0, 14, 1);
> > > > +static PAD_ST_CONF(SD0_CLK, 0, 12, 1);
> > > > +static PAD_ST_CONF(KS_IN0, 0, 11, 1);
> > > > +static PAD_ST_CONF(SENSOR0_PCLK, 0, 9, 1);
> > > > +static PAD_ST_CONF(I2C0_SCLK, 0, 7, 1);
> > > > +static PAD_ST_CONF(KS_OUT0, 0, 6, 1);
> > > > +static PAD_ST_CONF(KS_OUT1, 0, 5, 1);
> > > > +static PAD_ST_CONF(KS_OUT2, 0, 4, 1);
> > > > +static PAD_ST_CONF(ETH_TXD3, 0, 3, 1);
> > > > +static PAD_ST_CONF(ETH_TXD2, 0, 2, 1);
> > > > +
> > > > +/*PAD_ST1*/
> > >
> > > /* PAD_ST1 */
> > >
> > > > +static PAD_ST_CONF(DSI_DP2, 1, 31, 1);
> > > > +static PAD_ST_CONF(DSI_DN2, 1, 30, 1);
> > > > +static PAD_ST_CONF(I2S_LRCLK0, 1, 29, 1);
> > > > +static PAD_ST_CONF(UART3_CTSB, 1, 27, 1);
> > > > +static PAD_ST_CONF(UART3_RTSB, 1, 26, 1);
> > > > +static PAD_ST_CONF(UART3_RX, 1, 25, 1);
> > > > +static PAD_ST_CONF(UART2_RTSB, 1, 24, 1);
> > > > +static PAD_ST_CONF(UART2_CTSB, 1, 23, 1);
> > > > +static PAD_ST_CONF(UART2_RX, 1, 22, 1);
> > > > +static PAD_ST_CONF(ETH_RXD0, 1, 21, 1);
> > > > +static PAD_ST_CONF(ETH_RXD1, 1, 20, 1);
> > > > +static PAD_ST_CONF(ETH_CRS_DV, 1, 19, 1);
> > > > +static PAD_ST_CONF(ETH_RXER, 1, 18, 1);
> > > > +static PAD_ST_CONF(ETH_TXD1, 1, 17, 1);
> > > > +static PAD_ST_CONF(LVDS_OAP, 1, 12, 1);
> > > > +static PAD_ST_CONF(PCM1_CLK, 1, 11, 1);
> > > > +static PAD_ST_CONF(PCM1_IN, 1, 10, 1);
> > > > +static PAD_ST_CONF(PCM1_SYNC, 1, 9, 1);
> > > > +static PAD_ST_CONF(I2C1_SCLK, 1, 8, 1);
> > > > +static PAD_ST_CONF(I2C1_SDATA, 1, 7, 1);
> > > > +static PAD_ST_CONF(I2C2_SCLK, 1, 6, 1);
> > > > +static PAD_ST_CONF(I2C2_SDATA, 1, 5, 1);
> > > > +
> > > > +static PAD_ST_CONF(SPI0_MISO, 1, 3, 1);
> > > > +static PAD_ST_CONF(SPI0_SS, 1, 2, 1);
> > > > +static PAD_ST_CONF(I2S_BCLK0, 1, 1, 1);
> > > > +static PAD_ST_CONF(I2S_MCLK0, 1, 0, 1);
> > > > +
> > > > +/******PAD PULL UP/DOWN CONFIGURES*************************/
> > >
> > > Remove this.
> > >
> > > > +/*PAD_PULLCTL0*/
> > >
> > > /* PAD_PULLCTL0 */
> > >
> > > > +static PAD_PULLCTL_CONF(PCM1_SYNC, 0, 30, 1);
> > > > +static PAD_PULLCTL_CONF(PCM1_OUT, 0, 29, 1);
> > > > +static PAD_PULLCTL_CONF(KS_OUT2, 0, 28, 1);
> > > > +static PAD_PULLCTL_CONF(LCD0_D2, 0, 27, 1);
> > > > +static PAD_PULLCTL_CONF(DSI_DN3, 0, 26, 1);
> > > > +static PAD_PULLCTL_CONF(ETH_RXER, 0, 16, 1);
> > > > +static PAD_PULLCTL_CONF(SIRQ0, 0, 14, 2);
> > > > +static PAD_PULLCTL_CONF(SIRQ1, 0, 12, 2);
> > > > +static PAD_PULLCTL_CONF(SIRQ2, 0, 10, 2);
> > > > +static PAD_PULLCTL_CONF(I2C0_SDATA, 0, 9, 1);
> > > > +static PAD_PULLCTL_CONF(I2C0_SCLK, 0, 8, 1);
> > > > +static PAD_PULLCTL_CONF(KS_IN0, 0, 7, 1);
> > > > +static PAD_PULLCTL_CONF(KS_IN1, 0, 6, 1);
> > > > +static PAD_PULLCTL_CONF(KS_IN2, 0, 5, 1);
> > > > +static PAD_PULLCTL_CONF(KS_IN3, 0, 4, 1);
> > > > +static PAD_PULLCTL_CONF(KS_OUT0, 0, 2, 1);
> > > > +static PAD_PULLCTL_CONF(KS_OUT1, 0, 1, 1);
> > > > +static PAD_PULLCTL_CONF(DSI_DP1, 0, 0, 1);
> > > > +
> > > > +/*PAD_PULLCTL1*/
> > >
> > > /* PAD_PULLCTL1 */
> > >
> > > > +static PAD_PULLCTL_CONF(SD0_D0, 1, 17, 1);
> > > > +static PAD_PULLCTL_CONF(SD0_D1, 1, 16, 1);
> > > > +static PAD_PULLCTL_CONF(SD0_D2, 1, 15, 1);
> > > > +static PAD_PULLCTL_CONF(SD0_D3, 1, 14, 1);
> > > > +static PAD_PULLCTL_CONF(SD0_CMD, 1, 13, 1);
> > > > +static PAD_PULLCTL_CONF(SD0_CLK, 1, 12, 1);
> > > > +static PAD_PULLCTL_CONF(UART0_RX, 1, 2, 1);
> > > > +static PAD_PULLCTL_CONF(UART0_TX, 1, 1, 1);
> > > > +static PAD_PULLCTL_CONF(CLKO_25M, 1, 0, 1);
> > > > +
> > > > +/*PAD_PULLCTL2*/
> > >
> > > /* PAD_PULLCTL2 */
> > >
> > > > +static PAD_PULLCTL_CONF(ETH_TXD2, 2, 18, 1);
> > > > +static PAD_PULLCTL_CONF(ETH_TXD3, 2, 17, 1);
> > > > +static PAD_PULLCTL_CONF(SPI0_SS, 2, 16, 1);
> > > > +static PAD_PULLCTL_CONF(SPI0_MISO, 2, 15, 1);
> > > > +static PAD_PULLCTL_CONF(I2C1_SDATA, 2, 10, 1);
> > > > +static PAD_PULLCTL_CONF(I2C1_SCLK, 2, 9, 1);
> > > > +static PAD_PULLCTL_CONF(I2C2_SDATA, 2, 8, 1);
> > > > +static PAD_PULLCTL_CONF(I2C2_SCLK, 2, 7, 1);
> > > > +
> > > > +/********PAD INFOS*****************************/
> > > > +
> > >
> > > Remove.
> > >
> > > > +/* Pad info table for the pinmux subsystem */
> > > > +static struct owl_padinfo s700_padinfo[NUM_PADS] = {
> > > > + [ETH_TXD0] = PAD_INFO_ST(ETH_TXD0),
> > > > + [ETH_TXD1] = PAD_INFO_ST(ETH_TXD1),
> > > > + [ETH_TXEN] = PAD_INFO_ST(ETH_TXEN),
> > > > + [ETH_RXER] = PAD_INFO_PULLCTL_ST(ETH_RXER),
> > > > + [ETH_CRS_DV] = PAD_INFO_ST(ETH_CRS_DV),
> > > > + [ETH_RXD1] = PAD_INFO_ST(ETH_RXD1),
> > > > + [ETH_RXD0] = PAD_INFO_ST(ETH_RXD0),
> > > > + [ETH_REF_CLK] = PAD_INFO_ST(ETH_REF_CLK),
> > > > + [ETH_MDC] = PAD_INFO(ETH_MDC),
> > > > + [ETH_MDIO] = PAD_INFO(ETH_MDIO),
> > > > + [SIRQ0] = PAD_INFO_PULLCTL(SIRQ0),
> > > > + [SIRQ1] = PAD_INFO_PULLCTL(SIRQ1),
> > > > + [SIRQ2] = PAD_INFO_PULLCTL(SIRQ2),
> > > > + [I2S_D0] = PAD_INFO(I2S_D0),
> > > > + [I2S_BCLK0] = PAD_INFO_ST(I2S_BCLK0),
> > > > + [I2S_LRCLK0] = PAD_INFO_ST(I2S_LRCLK0),
> > > > + [I2S_MCLK0] = PAD_INFO_ST(I2S_MCLK0),
> > > > + [I2S_D1] = PAD_INFO(I2S_D1),
> > > > + [I2S_BCLK1] = PAD_INFO(I2S_BCLK1),
> > > > + [I2S_LRCLK1] = PAD_INFO_ST(I2S_LRCLK1),
> > > > + [I2S_MCLK1] = PAD_INFO_ST(I2S_MCLK1),
> > > > + [KS_IN0] = PAD_INFO_PULLCTL_ST(KS_IN0),
> > > > + [KS_IN1] = PAD_INFO_PULLCTL(KS_IN1),
> > > > + [KS_IN2] = PAD_INFO_PULLCTL(KS_IN2),
> > > > + [KS_IN3] = PAD_INFO_PULLCTL(KS_IN3),
> > > > + [KS_OUT0] = PAD_INFO_PULLCTL_ST(KS_OUT0),
> > > > + [KS_OUT1] = PAD_INFO_PULLCTL_ST(KS_OUT1),
> > > > + [KS_OUT2] = PAD_INFO_PULLCTL_ST(KS_OUT2),
> > > > + [LVDS_OEP] = PAD_INFO(LVDS_OEP),
> > > > + [LVDS_OEN] = PAD_INFO(LVDS_OEN),
> > > > + [LVDS_ODP] = PAD_INFO(LVDS_ODP),
> > > > + [LVDS_ODN] = PAD_INFO(LVDS_ODN),
> > > > + [LVDS_OCP] = PAD_INFO(LVDS_OCP),
> > > > + [LVDS_OCN] = PAD_INFO(LVDS_OCN),
> > > > + [LVDS_OBP] = PAD_INFO(LVDS_OBP),
> > > > + [LVDS_OBN] = PAD_INFO(LVDS_OBN),
> > > > + [LVDS_OAP] = PAD_INFO_ST(LVDS_OAP),
> > > > + [LVDS_OAN] = PAD_INFO(LVDS_OAN),
> > > > + [LVDS_EEP] = PAD_INFO(LVDS_EEP),
> > > > + [LVDS_EEN] = PAD_INFO(LVDS_EEN),
> > > > + [LVDS_EDP] = PAD_INFO(LVDS_EDP),
> > > > + [LVDS_EDN] = PAD_INFO(LVDS_EDN),
> > > > + [LVDS_ECP] = PAD_INFO(LVDS_ECP),
> > > > + [LVDS_ECN] = PAD_INFO(LVDS_ECN),
> > > > + [LVDS_EBP] = PAD_INFO(LVDS_EBP),
> > > > + [LVDS_EBN] = PAD_INFO(LVDS_EBN),
> > > > + [LVDS_EAP] = PAD_INFO(LVDS_EAP),
> > > > + [LVDS_EAN] = PAD_INFO(LVDS_EAN),
> > > > + [LCD0_D18] = PAD_INFO(LCD0_D18),
> > > > + [LCD0_D2] = PAD_INFO_PULLCTL(LCD0_D2),
> > > > + [DSI_DP3] = PAD_INFO(DSI_DP3),
> > > > + [DSI_DN3] = PAD_INFO_PULLCTL(DSI_DN3),
> > > > + [DSI_DP1] = PAD_INFO_PULLCTL(DSI_DP1),
> > > > + [DSI_DN1] = PAD_INFO(DSI_DN1),
> > > > + [DSI_DP0] = PAD_INFO_ST(DSI_DP0),
> > > > + [DSI_DN0] = PAD_INFO_ST(DSI_DN0),
> > > > + [DSI_DP2] = PAD_INFO_ST(DSI_DP2),
> > > > + [DSI_DN2] = PAD_INFO_ST(DSI_DN2),
> > > > + [SD0_D0] = PAD_INFO_PULLCTL(SD0_D0),
> > > > + [SD0_D1] = PAD_INFO_PULLCTL(SD0_D1),
> > > > + [SD0_D2] = PAD_INFO_PULLCTL(SD0_D2),
> > > > + [SD0_D3] = PAD_INFO_PULLCTL(SD0_D3),
> > > > + [SD0_CMD] = PAD_INFO_PULLCTL(SD0_CMD),
> > > > + [SD0_CLK] = PAD_INFO_PULLCTL_ST(SD0_CLK),
> > > > + [SD1_CLK] = PAD_INFO(SD1_CLK),
> > > > + [SPI0_SS] = PAD_INFO_PULLCTL_ST( SPI0_SS),
> > > > + [SPI0_MISO] = PAD_INFO_PULLCTL_ST(SPI0_MISO),
> > > > + [UART0_RX] = PAD_INFO_PULLCTL_ST(UART0_RX),
> > > > + [UART0_TX] = PAD_INFO_PULLCTL_ST(UART0_TX),
> > > > + [I2C0_SCLK] = PAD_INFO_PULLCTL_ST(I2C0_SCLK),
> > > > + [I2C0_SDATA] = PAD_INFO_PULLCTL_ST(I2C0_SDATA),
> > > > + [SENSOR0_PCLK] = PAD_INFO_ST(SENSOR0_PCLK),
> > > > + [SENSOR0_CKOUT] = PAD_INFO(SENSOR0_CKOUT),
> > > > + [DNAND_ALE] = PAD_INFO(DNAND_ALE),
> > > > + [DNAND_CLE] = PAD_INFO(DNAND_CLE),
> > > > + [DNAND_CEB0] = PAD_INFO(DNAND_CEB0),
> > > > + [DNAND_CEB1] = PAD_INFO(DNAND_CEB1),
> > > > + [DNAND_CEB2] = PAD_INFO(DNAND_CEB2),
> > > > + [DNAND_CEB3] = PAD_INFO(DNAND_CEB3),
> > > > + [UART2_RX] = PAD_INFO_ST(UART2_RX),
> > > > + [UART2_TX] = PAD_INFO_ST(UART2_TX),
> > > > + [UART2_RTSB] = PAD_INFO_ST(UART2_RTSB),
> > > > + [UART2_CTSB] = PAD_INFO_ST(UART2_CTSB),
> > > > + [UART3_RX] = PAD_INFO_ST(UART3_RX),
> > > > + [UART3_TX] = PAD_INFO(UART3_TX),
> > > > + [UART3_RTSB] = PAD_INFO_ST(UART3_RTSB),
> > > > + [UART3_CTSB] = PAD_INFO_ST(UART3_CTSB),
> > > > + [PCM1_IN] = PAD_INFO_ST(PCM1_IN),
> > > > + [PCM1_CLK] = PAD_INFO_ST(PCM1_CLK),
> > > > + [PCM1_SYNC] = PAD_INFO_PULLCTL_ST(PCM1_SYNC),
> > > > + [PCM1_OUT] = PAD_INFO_PULLCTL(PCM1_OUT),
> > > > + [I2C1_SCLK] = PAD_INFO_PULLCTL_ST(I2C1_SCLK),
> > > > + [I2C1_SDATA] = PAD_INFO_PULLCTL_ST(I2C1_SDATA),
> > > > + [I2C2_SCLK] = PAD_INFO_PULLCTL_ST(I2C2_SCLK),
> > > > + [I2C2_SDATA] = PAD_INFO_PULLCTL_ST(I2C2_SDATA),
> > > > + [CSI_DN0] = PAD_INFO(CSI_DN0),
> > > > + [CSI_DP0] = PAD_INFO(CSI_DP0),
> > > > + [CSI_DN1] = PAD_INFO(CSI_DN1),
> > > > + [CSI_DP1] = PAD_INFO(CSI_DP1),
> > > > + [CSI_CN] = PAD_INFO(CSI_CN),
> > > > + [CSI_CP] = PAD_INFO(CSI_CP),
> > > > + [CSI_DN2] = PAD_INFO(CSI_DN2),
> > > > + [CSI_DP2] = PAD_INFO(CSI_DP2),
> > > > + [CSI_DN3] = PAD_INFO(CSI_DN3),
> > > > + [CSI_DP3] = PAD_INFO(CSI_DP3),
> > > > + [DNAND_WRB] = PAD_INFO(DNAND_WRB),
> > > > + [DNAND_RDB] = PAD_INFO(DNAND_RDB),
> > > > + [DNAND_RB0] = PAD_INFO(DNAND_RB0),
> > > > + [PORB] = PAD_INFO(PORB),
> > > > + [CLKO_25M] = PAD_INFO_PULLCTL(CLKO_25M),
> > > > + [BSEL] = PAD_INFO(BSEL),
> > > > + [PKG0] = PAD_INFO(PKG0),
> > > > + [PKG1] = PAD_INFO(PKG1),
> > > > + [PKG2] = PAD_INFO(PKG2),
> > > > + [PKG3] = PAD_INFO(PKG3),
> > > > + [ETH_TXD2] = PAD_INFO_PULLCTL_ST(ETH_TXD2),
> > > > + [ETH_TXD3] = PAD_INFO_PULLCTL_ST(ETH_TXD3),
> > > > +};
> > > > +
> > > > +static const struct owl_gpio_port s700_gpio_ports[] = {
> > > > + OWL_GPIO_PORT(A, 0x0000, 32, 0x0, 0x4, 0x8, 0x204, 0x208,
> > > > 0x20C, 0x230, 0),
> > >
> > > Again, check whether this port has 32 bits or not!
> > >
> > > > + OWL_GPIO_PORT(B, 0x000C, 32, 0x0, 0x4, 0x8, 0x204, 0x210,
> > > > 0x214, 0x238, 1),
> > > > + OWL_GPIO_PORT(C, 0x0018, 32, 0x0, 0x4, 0x8, 0x204, 0x218,
> > > > 0x21C, 0x240, 2),
> > > > + OWL_GPIO_PORT(D, 0x0024, 32, 0x0, 0x4, 0x8, 0x204, 0x220,
> > > > 0x224, 0x248, 3),
> > > > + /* 0x24C (INTC_GPIOD_TYPE1) used to tweak the driver to
> > > > handle generic */
> > >
> > > Need to ellaborate what you are trying to say. Seems like you have
> > > used the INTC_GPIOD_TYPE1 offset for INTC_GPIOE_TYPE.
> > >
> >
> > Register offset 0 -> 16-32 bit and offset 1 -> 0-15 bit for the PORT A
> > to D, but for PORT E offset 0 -> 0-15 bit thus offeset is passed (0x250
> > - 32)
> >
> > > > + OWL_GPIO_PORT(E, 0x0030, 8, 0x0, 0x4, 0x8, 0x204, 0x228,
> > > > 0x22C, 0x24C, 4),
> > > > +};
> > > > +
> > > > +enum owl_pinconf_pull {
> > > > + OWL_PINCONF_PULL_DOWN,
> > > > + OWL_PINCONF_PULL_UP,
> > > > +};
> > > > +
> > > > +static int s700_pad_pinconf_arg2val(const struct owl_padinfo *info,
> > > > + unsigned int param,
> > > > + u32 *arg)
> > > > +{
> > > > + switch (param) {
> > > > + case PIN_CONFIG_BIAS_PULL_DOWN:
> > > > + *arg = OWL_PINCONF_PULL_DOWN;
> > > > + break;
> > > > + case PIN_CONFIG_BIAS_PULL_UP:
> > > > + *arg = OWL_PINCONF_PULL_UP;
> > > > + break;
> > > > + case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
> > > > + *arg = (*arg >= 1 ? 1 : 0);
> > > > + break;
> > > > + default:
> > > > + return -ENOTSUPP;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int s700_pad_pinconf_val2arg(const struct owl_padinfo *padinfo,
> > > > + unsigned int param,
> > > > + u32 *arg)
> > > > +{
> > > > + switch (param) {
> > > > + case PIN_CONFIG_BIAS_PULL_DOWN:
> > > > + *arg = *arg == OWL_PINCONF_PULL_DOWN;
> > > > + break;
> > > > + case PIN_CONFIG_BIAS_PULL_UP:
> > > > + *arg = *arg == OWL_PINCONF_PULL_UP;
> > > > + break;
> > > > + case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
> > > > + *arg = *arg == 1;
> > > > + break;
> > > > + default:
> > > > + return -ENOTSUPP;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static struct owl_pinctrl_soc_data s700_pinctrl_data = {
> > > > + .padinfo = s700_padinfo,
> > > > + .pins = (const struct pinctrl_pin_desc *)s700_pads,
> > > > + .npins = ARRAY_SIZE(s700_pads),
> > > > + .functions = s700_functions,
> > > > + .nfunctions = ARRAY_SIZE(s700_functions),
> > > > + .groups = s700_groups,
> > > > + .ngroups = ARRAY_SIZE(s700_groups),
> > > > + .ngpios = NUM_GPIOS,
> > > > + .ports = s700_gpio_ports,
> > > > + .nports = ARRAY_SIZE(s700_gpio_ports),
> > > > + .padctl_arg2val = s700_pad_pinconf_arg2val,
> > > > + .padctl_val2arg = s700_pad_pinconf_val2arg,
> > > > +};
> > > > +
> > > > +static int s700_pinctrl_probe(struct platform_device *pdev)
> > > > +{
> > > > + pr_info("[OWL] pinctrl s700 probe\n");
> > >
> > > No banner please.
> > >
> > > > + return owl_pinctrl_probe(pdev, &s700_pinctrl_data);
> > > > +}
> > > > +
> > > > +static const struct of_device_id s700_pinctrl_of_match[] = {
> > > > + { .compatible = "actions,s700-pinctrl", },
> > > > + {}
> > > > +};
> > > > +
> > > > +static struct platform_driver s700_pinctrl_driver = {
> > > > + .probe = s700_pinctrl_probe,
> > > > + .driver = {
> > > > + .name = "pinctrl-s700",
> > > > + .owner = THIS_MODULE,
> > >
> > > Don't we set this in core itself? Linus?
> > >
> > Yes it is, will be removed
> >
> > > Regards,
> > > Mani
> > >
> > > > + .of_match_table = of_match_ptr(s700_pinctrl_of_match),
> > > > + },
> > > > +};
> > > > +
> > > > +static int __init s700_pinctrl_init(void)
> > > > +{
> > > > + return platform_driver_register(&s700_pinctrl_driver);
> > > > +}
> > > > +arch_initcall(s700_pinctrl_init);
> > > > +
> > > > +static void __exit s700_pinctrl_exit(void)
> > > > +{
> > > > + platform_driver_unregister(&s700_pinctrl_driver);
> > > > +}
> > > > +module_exit(s700_pinctrl_exit);
> > > > +
> > > > +MODULE_AUTHOR("Actions Semi Inc.");
> > > > +MODULE_DESCRIPTION("Actions Semi S700 Soc Pinctrl Driver");
> > > > +MODULE_LICENSE("GPL");
> > > > --
> > > > 2.14.4
> > > >
> >
>
> --
> Thanks,
> Parthiban N
>
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-22 Fax: (+49)-8142-66989-80 Email: pn@xxxxxxx
>
Re: [PATCH v5 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v5 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Date: Tue, 6 Nov 2018 22:55:11 +0530
- In-reply-to: <9d1bff01-4054-9591-520d-742433c13d14@denx.de>
- References: <20180829082413.2512005-1-sravanhome@gmail.com> <20180829082413.2512005-5-sravanhome@gmail.com> <20180829163418.GD21136@Mani-XPS-13-9360> <efd5f2d6-b9ff-ef9c-4e67-89944e7cdb5f@gmail.com> <9d1bff01-4054-9591-520d-742433c13d14@denx.de>
- User-agent: Mutt/1.9.4 (2018-02-28)
- Follow-Ups:
- Re: [PATCH v5 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver
- From: Parthiban Nallathambi
- Re: [PATCH v5 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver
- References:
- [PATCH v5 0/5] Add Actions Semi S700 pinctrl support
- From: Saravanan Sekar
- [PATCH v5 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver
- From: Saravanan Sekar
- Re: [PATCH v5 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver
- From: Manivannan Sadhasivam
- Re: [PATCH v5 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver
- From: Saravanan Sekar
- Re: [PATCH v5 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver
- From: Parthiban Nallathambi
- [PATCH v5 0/5] Add Actions Semi S700 pinctrl support
- Prev by Date: Re: [PATCH v5 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver
- Next by Date: Re: [PATCH v5 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver
- Previous by thread: Re: [PATCH v5 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver
- Next by thread: Re: [PATCH v5 4/5] pinctrl: actions: Add Actions Semi S700 pinctrl driver
- Index(es):
 |