[PATCH v2] pinctrl: lpc18xx: Use define directive for PIN_CONFIG_GPIO_PIN_INT

[Nathan Chancellor <natechancellor@xxxxxxxxx>]

Clang warns when one enumerated type is implicitly converted to another:

drivers/pinctrl/pinctrl-lpc18xx.c:643:29: warning: implicit conversion
from enumeration type 'enum lpc18xx_pin_config_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
        {"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0},
        ~                          ^~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-lpc18xx.c:648:12: warning: implicit conversion
from enumeration type 'enum lpc18xx_pin_config_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
        PCONFDUMP(PIN_CONFIG_GPIO_PIN_INT, "gpio pin int", NULL, true),
        ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
        .param = a, .display = b, .format = c, .has_arg = d     \
                 ^
2 warnings generated.

It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/140
Signed-off-by: Nathan Chancellor <natechancellor@xxxxxxxxx>
---

v1 -> v2:

* Improve comment so kernel-doc doesn't warn.

 drivers/pinctrl/pinctrl-lpc18xx.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-lpc18xx.c b/drivers/pinctrl/pinctrl-lpc18xx.c
index a14bc5e5fc24..06be55dab341 100644
--- a/drivers/pinctrl/pinctrl-lpc18xx.c
+++ b/drivers/pinctrl/pinctrl-lpc18xx.c
@@ -630,14 +630,8 @@ static const struct pinctrl_pin_desc lpc18xx_pins[] = {
 	LPC18XX_PIN(i2c0_sda, PIN_I2C0_SDA),
 };
 
-/**
- * enum lpc18xx_pin_config_param - possible pin configuration parameters
- * @PIN_CONFIG_GPIO_PIN_INT: route gpio to the gpio pin interrupt
- * 	controller.
- */
-enum lpc18xx_pin_config_param {
-	PIN_CONFIG_GPIO_PIN_INT = PIN_CONFIG_END + 1,
-};
+/* PIN_CONFIG_GPIO_PIN_INT: route gpio to the gpio pin interrupt controller */
+#define PIN_CONFIG_GPIO_PIN_INT		(PIN_CONFIG_END + 1)
 
 static const struct pinconf_generic_params lpc18xx_params[] = {
 	{"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0},
-- 
2.19.1