On Wed, 31 Oct 2018, Dan O'Donovan wrote: > UP Squared (UP2) is a x86 SBC from AAEON based on Intel Apollo Lake. It > features a MAX 10 FPGA that routes lines from both SoC and on-board > devices to two I/O headers: > > +------------------------+ > | 40-pin RPi-like header | > +------| (HAT) | > | +------------------------+ > +-------+ +--------+ > | | | | +------------------------+ > | SoC |----| FPGA |-----| Custom UP2 pin header | > | | | | | (EXHAT) | > +-------+ +--------+ +------------------------+ > | > +------* On-board devices: LED, VLS... > > This is intended to enable vendor-specific applications to customize I/O > header pinout, as well as include low-latency functionality. It also > performs voltage level translation between the SoC (1.8V) and HAT header > (3.3V). > > Out of the box, this block implements a platform controller with a > GPIO-bitbanged control interface. It's enumerated by ACPI and provides > registers to control: > > - Configuration of all FPGA-routed header lines. These can be driven > SoC-to-header, header-to-SoC or set in high impedance. > > - On-board LEDs and enable lines for other platform devices. > > Add core support for this platform controller as a MFD device, exposing > these registers as a regmap. > > Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > Signed-off-by: Dan O'Donovan <dan@xxxxxxxxxx> > --- > drivers/mfd/Kconfig | 17 +++ > drivers/mfd/Makefile | 1 + > drivers/mfd/upboard.c | 336 ++++++++++++++++++++++++++++++++++++++++++++ > include/linux/mfd/upboard.h | 44 ++++++ > 4 files changed, 398 insertions(+) > create mode 100644 drivers/mfd/upboard.c > create mode 100644 include/linux/mfd/upboard.h Looks like you've ignored the review comments here too. -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog