Re: [PATCH 5/7] mfd: ds90ux9xx: add I2C bridge/alias and link connection driver

[Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>]

Hi Vladimir,

(CC'ing Wolfram)

On Friday, 12 October 2018 10:32:32 EEST Vladimir Zapolskiy wrote:
> On 10/12/2018 09:04 AM, Lee Jones wrote:
> > On Tue, 09 Oct 2018, Vladimir Zapolskiy wrote:
> >> From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
> >> 
> >> The change adds TI DS90Ux9xx I2C bridge/alias subdevice driver and
> >> FPD Link connection handling mechanism.
> >> 
> >> Access to I2C devices connected to a remote de-/serializer is done in
> >> a transparent way, on established link detection event such devices
> >> are registered on an I2C bus, which serves a local de-/serializer IC.
> >> 
> >> The development of the driver was a collaborative work, the
> >> contribution done by Balasubramani Vivekanandan includes:
> >> * original simplistic implementation of the driver,
> >> * support of implicitly specified devices in device tree,
> >> * support of multiple FPD links for TI DS90Ux9xx,
> >> * other kind of valuable review comments, clean-ups and fixes.
> >> 
> >> Also Steve Longerbeam made the following changes:
> >> * clear address maps after linked device removal,
> >> * disable pass-through in disconnection,
> >> * qualify locked status with non-zero remote address.
> >> 
> >> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
> >> ---
> >> 
> >>  drivers/mfd/Kconfig                |   8 +
> >>  drivers/mfd/Makefile               |   1 +
> >>  drivers/mfd/ds90ux9xx-i2c-bridge.c | 764 +++++++++++++++++++++++++++++
> >>  3 files changed, 773 insertions(+)
> >>  create mode 100644 drivers/mfd/ds90ux9xx-i2c-bridge.c
> > 
> > Shouldn't this live in drivers/i2c?
> 
> no, the driver is not for an I2C controller of any kind, and the driver does
> not register itself in the I2C subsystem by calling i2c_add_adapter() or
> i2c_add_numbered_adapter() or i2c_mux_add_adapter() etc, this topic was
> discussed with Wolfram also.

(Who is now on CC)

> Formally the driver converts the managed IC into a multi-address I2C
> slave device, I understand that it does not sound like a well suited driver
> for MFD, but ds90ux9xx-core.c and ds90ux9xx-i2c-bridge.c drivers are quite
> tightly coupled.

As mentioned in other e-mails in this thread I don't think this should be 
split out to a separate driver, I would move the functionality to the 
ds90ux9xx driver. You may want to register an I2C mux, but as you have a 
single port, that could be overkill. I haven't studied in details how to best 
support this chip using the existing I2C subsystems APIs (which we may want to 
extend if it needed), but I believe that (in your use cases) the deserializer 
should be a child of the serializer, and modeled as an I2C device.

-- 
Regards,

Laurent Pinchart