Re: [PATCH] pinctrl: icelake: Fix the resource number for community-4/5

[Rajat Jain <rajatja@xxxxxxxxxx>]

On Fri, Sep 14, 2018 at 12:41 AM Andy Shevchenko
<andy.shevchenko@xxxxxxxxx> wrote:
>
> On Fri, Sep 14, 2018 at 1:54 AM Rajat Jain <rajatja@xxxxxxxxxx> wrote:
> >
> > The Icelake does not have a community-3, and the memory resources are
> > laid out in the following order in the ACPI:
> >
> > resource-0: community-0 registers
> > resource-1: community-1 registers
> > resource-2: community-2 registers
> > resource-3: community-4 registers
> > resource-4: community-5 registers
> >
> > (EDS also describes the communities in the above order).
> >
> > Since the pinctrl driver exposes communities 0, 1, 4, 5, it needs to get
> > the corresponding community registers by getting the resourse number right.
> > Currently the resourse number is not correct for community 4 and 5, thus
> > fix that.
> >
>
> Can you share link to the ACPI dump of the tables? (you may get one by
> running `acpidump -o tables.dat`)

I don't have that command on my system, but I took
/sys/firmware/acpi/tables/DSDT from the system and disassembled it
using Intel disassembler (iasl -d) and here is the relevant portion
that describes the GPIO controller. The port IDs for communities can
be seen in the below output (i.e. the PCRB()):

            Device (GPIO)
            {
                Name (_HID, "INT3455")  // _HID: Hardware ID
                Name (_UID, Zero)  // _UID: Unique ID
                Name (_DDN, "GPIO Controller")  // _DDN: DOS Device Name
                Name (RBUF, ResourceTemplate ()
                {
                    Memory32Fixed (ReadWrite,
                        0x00000000,         // Address Base
                        0x00000000,         // Address Length
                        _Y06)
                    Memory32Fixed (ReadWrite,
                        0x00000000,         // Address Base
                        0x00000000,         // Address Length
                        _Y07)
                    Memory32Fixed (ReadWrite,
                        0x00000000,         // Address Base
                        0x00000000,         // Address Length
                        _Y08)
                    Memory32Fixed (ReadWrite,
                        0x00000000,         // Address Base
                        0x00000000,         // Address Length
                        _Y09)
                    Memory32Fixed (ReadWrite,
                        0x00000000,         // Address Base
                        0x00000000,         // Address Length
                        _Y0A)
                    Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, )
                    {
                        0x0000000E,
                    }
                })
                Method (_CRS, 0, NotSerialized)  // _CRS: Current
Resource Settings
                {
                    CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y06._BAS,
BAS0)  // _BAS: Base Address
                    CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y06._LEN,
LEN0)  // _LEN: Length
                    BAS0 = PCRB (0x6E)
                    LEN0 = 0x00010000
                    CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y07._BAS,
BAS1)  // _BAS: Base Address
                    CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y07._LEN,
LEN1)  // _LEN: Length
                    BAS1 = PCRB (0x6D)
                    LEN1 = 0x00010000
                    CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y08._BAS,
BAS2)  // _BAS: Base Address
                    CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y08._LEN,
LEN2)  // _LEN: Length
                    BAS2 = PCRB (0x6C)
                    LEN2 = 0x00010000
                    CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y09._BAS,
BAS4)  // _BAS: Base Address
                    CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y09._LEN,
LEN4)  // _LEN: Length
                    BAS4 = PCRB (0x6A)
                    LEN4 = 0x00010000
                    CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y0A._BAS,
BAS5)  // _BAS: Base Address
                    CreateDWordField (RBUF, \_SB.PCI0.GPIO._Y0A._LEN,
LEN5)  // _LEN: Length
                    BAS5 = PCRB (0x69)
                    LEN5 = 0x00010000
                    Return (RBUF) /* \_SB_.PCI0.GPIO.RBUF */
                }

                Method (_STA, 0, NotSerialized)  // _STA: Status
                {
                    Return (0x0F)
                }
            }

Please let me know if this helps, or if you need more info.

Thanks & Best Regards,

Rajat

>
> > Signed-off-by: Rajat Jain <rajatja@xxxxxxxxxx>
> > ---
> >  drivers/pinctrl/intel/pinctrl-icelake.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pinctrl/intel/pinctrl-icelake.c b/drivers/pinctrl/intel/pinctrl-icelake.c
> > index 630b966ce081..5b4eaf7c90df 100644
> > --- a/drivers/pinctrl/intel/pinctrl-icelake.c
> > +++ b/drivers/pinctrl/intel/pinctrl-icelake.c
> > @@ -331,8 +331,8 @@ static const struct intel_padgroup icllp_community5_gpps[] = {
> >  static const struct intel_community icllp_communities[] = {
> >         ICL_COMMUNITY(0, 0, 58, icllp_community0_gpps),
> >         ICL_COMMUNITY(1, 59, 152, icllp_community1_gpps),
> > -       ICL_COMMUNITY(2, 153, 215, icllp_community4_gpps),
> > -       ICL_COMMUNITY(3, 216, 240, icllp_community5_gpps),
> > +       ICL_COMMUNITY(3, 153, 215, icllp_community4_gpps),
> > +       ICL_COMMUNITY(4, 216, 240, icllp_community5_gpps),
> >  };
> >
> >  static const unsigned int icllp_spi0_pins[] = { 22, 23, 24, 25, 26 };
> > --
> > 2.19.0.397.gdd90340f6a-goog
> >
>
>
> --
> With Best Regards,
> Andy Shevchenko