RE: [PATCH V5 1/5] dt-bindings: arm: fsl: add scu binding doc

["A.s. Dong" <aisheng.dong@xxxxxxx>]

Hi Rob,

> > > +Clock bindings based on SCU Message Protocol
> > > +------------------------------------------------------------
> > > +
> > > +This binding uses the common clock binding[1].
> > > +
> > > +Required properties:
> > > +- compatible:		Should be "fsl,imx8qxp-clock".
> > > +- #clock-cells:		Should be 1. Contains the Clock ID value.
> >
> > There was a recent patch adding input clocks to other i.MX CCM bindings.
> > Is that needed here?
> >
> 
> Will double check it, thanks for reminder.

It should work for mx8 as well.

I will add them like below:
+- clocks:              List of clock specifiers, must contain an entry for
+                       each required entry in clock-names
+- clock-names:         Should include entries "xtal_32KHz", "xtal_24MHz"

Thanks for the suggestion.

Regards
Dong Aisheng