Re: [PATCH RESEND 2/2] gpio: mvebu: Allow to use non-default PWM counter

[Richard Genoud <richard.genoud@xxxxxxxxx>]

Hi,

On 06/08/2018 15:52, Andrew Lunn wrote:
> On Mon, Aug 06, 2018 at 10:29:16AM +0800, Aditya Prayoga wrote:
>> On multiple PWM lines, if the other PWM counter is unused, allocate it
>> to next PWM request. The priority would be:
>> 1. Default counter assigned to the bank
>> 2. Unused counter that is assigned to other bank
>> 3. Fallback to default counter
>>
>> For example on second bank there are three PWM request, first one would
>> use default counter (counter B), second one would try to use counter A,
>> and the third one would use counter B.
> 
> Hi Aditya
> 
> There are only two PWM counters for all the GPIO lines. So you cannot
> support 3 PWM requests. You have to enforce a maximum of two PWMs.
> 
> When i implemented this PWM code, i only needed one PWM. So it took
> the easy option. GPIO bank 0 uses counter A, GPIO bank1 uses counter
> B. For the hardware you have, this is not sufficient, so you need to
> generalise this. Any PWM can use any counter, whatever is available
> when the PWM is requested.
> 
> Rather than have a linked list of PWM, i think it would be better to
> have a static array of two mvebu_pwm structures. Index 0 uses counter
> A, index 1 uses counter B. You can then keep with the concept of
> pwm->pgiod != NULL means the counter is in use. The request() call can
> then find an unused PWM, set pwm->gpiod, and point mvchip->mvpwm to
> one of the two static instances.
> 
>     Andrew
> 
I'm not sure that the logic:
1. Default counter assigned to the bank
2. Unused counter that is assigned to other bank
3. Fallback to default counter
is the best one.

I gave the code a try, and I've been a little confused.
I declared:
- fan1 as gpio1 22 
- fan2 as gpio1 11
- fan3 as gpio0 22

and I did:
echo 10 > hwmon1/pwm1  # ok
echo 100 > hwmon2/pwm1 # still ok
echo 200 > hwmon3/pwm1 # hey !! my fan2 is now at 200 (I can see it with the scope)
# but
cat hwmon2/pwm1
100
# okay, I want my fan2 back, So I turn off fan3:
echo 0 > hwmon3/pwm1 # fan2 and fan3 are stopped
echo 100 > hwmon2/pwm1 # not working.. fan2 is still at 0 on the scope
but:
cat hwmon2/pwm1
100

IMHO, I would either:
- allow only 2 pwm and no more (but that's a pity)
- allow lots of fans, but once 2 different speeds are set, return EINVAL for another different speed (even if it's on another bank)
That way, we'll be able to switch on/off 1, 2, 3 or more fans, as long as they have the same speed.
I'll give an example :

echo 10 > hwmon1/pwm1 # ok
echo 100 > hwmon2/pwm1 # still ok
echo 200 > hwmon3/pwm1 # returns EINVAL
echo 10 > hwmon3/pwm1 # ok

The headache will come when we want to change the speed...
echo 50 > hwmon3/pwm1 # should this change the hwmon1 as well or return EINVAL ?
I'd say that it changes hwmon1 as well, as if hwmon1 and hwmon3 were tied.
But, If I then do :
echo 100 > hwmon3/pwm1 # fan2 was already at 100
What should happen ? Do fan1, fan2 and fan3 be set to 100 ?
Or fan1 stay at 10 and fan3 at 100 ? (in this case, fan3 won't be tied to fan1 anymore, but to fan2)

Hum...
I don't know if anyone followed me on this...
Anyway, I think I convinced myself that only allowing 2 pwm is less confusing than anything else :)



Richard.
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html