[PATCH 0/2] gpio: mvebu: Add support for multiple PWM lines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi everyone,

Helios4, an Armada 388 based NAS SBC, provides 2 (4-pins) fan connectors.
The PWM pins on both connector are connected to GPIO on bank 1. Current gpio-
mvebu does not allow more than one PWM on the same bank.

Aditya

---

Aditya Prayoga (2):
  gpio: mvebu: Add support for multiple PWM lines per GPIO chip
  gpio: mvebu: Allow to use non-default PWM counter

 drivers/gpio/gpio-mvebu.c | 111 ++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 92 insertions(+), 19 deletions(-)

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux