Hi, Fabio Anson Huang Best Regards! > -----Original Message----- > From: Fabio Estevam [mailto:festevam@xxxxxxxxx] > Sent: Tuesday, July 17, 2018 9:52 PM > To: Anson Huang <anson.huang@xxxxxxx> > Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>; open list:GPIO SUBSYSTEM > <linux-gpio@xxxxxxxxxxxxxxx>; linux-kernel <linux-kernel@xxxxxxxxxxxxxxx>; > dl-linux-imx <linux-imx@xxxxxxx> > Subject: Re: [PATCH V2] gpio: mxc: add power management support > > Hi Anson, > > [Next time please put the i.mx maintainers on Cc] > > On Mon, Jul 16, 2018 at 3:06 AM, Anson Huang <Anson.Huang@xxxxxxx> > wrote: > > GPIO registers could lose context on i.MX7D, when enter LPSR mode, the > > whole SoC will be powered off except LPSR domain, GPIO banks will lose > > context in this case, need to restore the context after resume from > > LPSR mode. > > > > This patch adds GPIO save/restore for those necessary registers, and > > put the save/restore operations in noirq suspend/resume phase, since > > GPIO is fundamental module which could be used by other peripherals' > > resume phase. > > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> > > > static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = { @@ -434,6 > > +445,9 @@ static int mxc_gpio_probe(struct platform_device *pdev) > > return err; > > } > > > > + if (of_machine_is_compatible("fsl,imx7d")) > > + port->support_power_off = true; > > This does not scale well as we need to support mx8 soon. > > Like I replied in my last message the best solution here is to add a > "fsl,imx7d-gpio" compatible entry in this driver. > > Then you can set a flag in the "fsl,imx7d-gpio" case to handle the 'power_off' > feature. > > With this method there will be no need to touch this driver again for adding > mx8 support. Thanks for detail suggestion, I will sent a V3 patch accordingly. Anson. ��.n��������+%������w��{.n�����{�� b���ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f