The datasheet do not document any registers to control drive strength, and no drive strength registers are for this reason described for this SoC. The flag indicating that drive strength can be controlled are however set for some pins in the driver. This leads to a NULL pointer dereference when the sh-pfc core tries to access the struct describing the drive strength registers, for example when reading the sysfs file pinconf-pins. Fix this by removing the SH_PFC_PIN_CFG_DRIVE_STRENGTH from all pins. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> --- drivers/pinctrl/sh-pfc/pfc-r8a77970.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77970.c b/drivers/pinctrl/sh-pfc/pfc-r8a77970.c index b02caf31671186d9..eeb58b3bbc9a0cef 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a77970.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a77970.c @@ -21,15 +21,13 @@ #include "core.h" #include "sh_pfc.h" -#define CFG_FLAGS SH_PFC_PIN_CFG_DRIVE_STRENGTH - #define CPU_ALL_PORT(fn, sfx) \ - PORT_GP_CFG_22(0, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \ - PORT_GP_CFG_28(1, fn, sfx, CFG_FLAGS), \ - PORT_GP_CFG_17(2, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \ - PORT_GP_CFG_17(3, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \ - PORT_GP_CFG_6(4, fn, sfx, CFG_FLAGS), \ - PORT_GP_CFG_15(5, fn, sfx, CFG_FLAGS) + PORT_GP_CFG_22(0, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE), \ + PORT_GP_28(1, fn, sfx), \ + PORT_GP_CFG_17(2, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE), \ + PORT_GP_CFG_17(3, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE), \ + PORT_GP_6(4, fn, sfx), \ + PORT_GP_15(5, fn, sfx) /* * F_() : just information * FM() : macro for FN_xxx / xxx_MARK -- 2.17.0 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html